Upsweep megaphone kit without heat shields. Includes one piece header pipe and two right hand megaphone muffler for a true "Stack" look. Accepts 1957-85 XL Ironhead motors. Kit is for use on rigid frame only.The angled megaphone adds an extra "kick up"...

Bronx FL muffler tip kit includes chrome 24" muffler set. Set features two Bronx tips that fit on 1-7/8" outer diameter end. The inlet measures 1-3/4".For right or left side dual FLH muffler applications. Must order clamps separately. *NOTE: Mufflers...

Rear upsweep extension pipe features a chrome finish and is for use in rigid frames.Fits into flat pipe on Panhead and Knucklehead models. Fits:EL 1936-1947FL 1948-1965Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech...

Black exhaust header set consists of a front pipe and a rear pipe for solo models. Fits:WL 1937-1952Additional Information OEM No.65490-41 UOM1 - KIT FinishBlack ManufacturerV-Twin OriginImported 2025 Catalog Pages818

Chrome header set for rigid frame installation on Panhead engines. Set includes rear pipe and an offset front pipe extension, which fits into original flat (squash) pipe, to run parallel to rear pipe as shown.Hi-style pipes for maximum ground clearance...

Original multi-piece design includes chrome mufflers, header pipes and mount brackets.Muffler set is seamless custom type for Ironhead models. Include embossed lines on mufflers. Components available seprately. Fits:XLCH 1959-1978XLH 1957-1978Additional...

Panhead rear upsweep pipe features a chrome finish. Fits:FL 1948-1957Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #29-0035 Panhead Upsweep Header Set Chrome.Suggested to use with #29-0092 Exhaust...

Replica chrome muffler set with slash cut outlet has 2-1/2" body diameter and 1-3/4" inside inlet diameter.**CAUTION: These exhaust products are not legal for sale or use in Californai on pollution controlled vehicles. these products are intended for...

Chrome 15-1/4" megaphone tip set has a 1-7/8" inlet to fit over OE style cigar mufflers. Features a round end.Set of two. Baffles and clamps not included. For use with stock OEM style cigar mufflers as noted. For mounting use 1-7/8" inner diameter clamp...

Chrome long style WRTT exhaust extension. Fits:W 1930-1952Additional Information UOM1 - EA MeasurementsAdditional InformationOuter Diameter: 1-3/4"Overall Length: 30" ManufacturerV-Twin OriginImported

XL exhaust system includes 38" long tapered muffler set. The muffler sets have slider channels and mount with hanger bracket, which is included in the set, but will not fit on 1979 Sporsters.One piece seamless design with the tapered muffler welded and...

V-Twin - 30-0882 - Replica Panhead Front Pipe ChromeDescriptionJune 2020 New Production replica Panhead front header pipe features a chrome finish.Replica exhaust system components are produced by V-Twin's own exclusive tooling. New fixtures and dies are...

Rear head shield kit includes a rear pipe shield and y-pipe piece in chrome.*NOTE: Worm clamps included for installation. Fits:FL 1965-1969Additional Information OEM No.65560-65 UOM1 - KIT ManufacturerV-Twin OriginImported Replacement Items30-0865 -...

Short heat shield is to fit over 1-3/4" exhaust pipes. Fits:FL 1958-1984Additional Information UOM1 - EA MeasurementsAdditional InformationLength: 4" ManufacturerV-Twin OriginImported 2025 Catalog Pages660

Chrome 80cm long style WRTT exhaust extension with 1-7/8" inner diameter to fit over 1-3/4" outer diameter exhaust pipes.*NOTE: Required joint and mount clamps, not included. Fits:FL 1941-1965Additional Information UOM1 - EA MeasurementsAdditional...

Exhaust heat shield set features the original factory design with a chrome finish.Features holes that go through the shield to install the two screws for installation on a 1-3/4" OD exhaust tubing. Includes two screws, two lock washers and two nuts...

Chrome Panhead exhaust header kit includes four header pipes: the front, rear, y and flat pipe.Kit includes flex cover set, full clamp set and bolt set from Colony. All parts are packaged in a 5 gallon Oilzum can. Fits:FL 1948-1957Additional Information ...

Panhead exhuast header kit features a chrome finish. This 4 piece system includes clamps and hardware.Kit is packed in a 5 gallon metal oil can. Fits:EL 1948-1952FL 1948-1957Additional Information UOM1 - KIT FinishChrome ManufacturerV-Twin ...

Panhead exhaust kit includes 4 pipes, clamps, flex tube covers and the Colony hardware kit, that is used for installation. The clamps and bolts are parkerized and the pipes feature a black paint finish.The header top clamp set included in this kit is...

Ironhead LAF exhaust header set features a black finish.*NOTE: Pipes attach to each other at the end. Additional mount bracket may be fabricated to mount set to frame. *NOTE: Exhaust header set is painted black but has oxidation (rust) on the inside...

Ironhead LAF style header set features a chrome finish.*NOTE: Pipes attach to each other at the end. Additional mount bracket may be fabricated to mount set to frame. Fits:XL 1957-1985Additional Information UOM1 - SET MeasurementsAdditional...

Flat pipe the "squash" type, comes with a tab and features a chrome finish.*NOTE: The edge is ground off to allow for clearance on thicker heavy duty cases. The tab can be tilted by use of an adjustable wrench to give correct angle for installing mount...

45 Exhaust header set is an accurately formed black header pipe set which includes a chrome flex cover set.The outer diameter where the pipe attached to the head measures 1.459". ...

Original multi-piece design includes chrome mufflers, header pipes and mount brackets.Componenets available separately. For kick and electric start models. Fits:XLCH 1957-1978XLH 1957-1978Additional Information UOM1 - KIT ManufacturerV-Twin ...

Kit includes a chrome 24" cigar style muffler and a Bronx muffler tail to fit 1-3/4" pipes.*NOTE: Exhaust clamps not included. Fits:FL 1941-1957Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages656 Replacement...

Muffler includes one megaphone tip with heavy duty 1-7/8" clamp installed. Fits:FL 1958-1984Additional Information UOM1 - EA MeasurementsAdditional InformationLength: 36" ManufacturerV-Twin OriginImported Size1-7/8 inch 2025 Catalog Pages655

Black combo exhaust connector pipe has bracket riveted in place as original, and includes 1-3/4" inside diameter "Y" connector.*NOTE: Flat (squash) pipe may require hand fitting. Edge of pipe may need to be adjusted to provide clearance for pipes...

Chrome 31" muffler kit for use with dual exhaust. Muffler is 31" long with upsweep design. Inlet end fits 1-3/4" outer diameter pipes. Muffler set includes 1-7/8" clamp set, and 3" hanger clamps.Includes body and inlet clamps, with inlet size of 1-3/4"...

Kit includes two 22" FLH full chrome mufflers and two 15" long megaphone tips with heavy duty 1-7/8" clamps.For use with right and left side dual exhaust! ...

Chrome finish rear heat shield for 2:1 exhaust systems on Shovelheads and Panheads. Does not have the cut out for the crossover pipe.Includes two worm clamps. Heat shield includes 2 worm drive clamps for installation. *NOTE: Heat shield attaches by two...

Cover is flexible with an outer diameter of 1.65" and fits over 1-1/2" outer diameter exhaust headers. Open length is 14-1/2" for front, and 9" for the rear.Sold in a quantity of 2. Fits:G 1933-1973WL 1936-1952Additional Information UOM1 - SET ...

Chrome muffler kit includes a single 22" muffler with 15" megaphone muffler tip and one 1-7/8" clamp.For one side. Fits:FL 1958-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages654 Replacement Items31-2103 -...

Replica tubing set is chrome with a 1-7/8" inner diameter. This bendable slinky type tubing fits over 1-3/4" pipes. Constructed of steel.Set includes one 10" cover and one 11-1/2" cover. Sold in a quantity of 2. Fits:FL 1941-1969EL 1936-1940Additional...

Rear chrome heat shield has worm clamps included. Shield has a cutout for crossover pipes. Fits:FL 1965-1969Additional Information OEM No.65560-65A UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages660 Tech NoteFits with Vtwin #30-0998,...

Panhead chrome rear exhaust pipes for Big Twin models with crossover fit stock systems only. For connecting to rear exhaust hearder intersection to left side.Pipe is used for crossover when using rear pipe with junction. For use with Panhead kick start...

Chrome rear exhaust pipe for Big Twins with crossover fits stock systems only. Fits:FL 1958-1965Additional Information OEM No.65496-61 UOM1 - EA FinishChrome ManufacturerV-Twin OriginImported 2025 Catalog Pages651

Chrome top left heat shield has worm clamps included. Fits:FL 1965-1984Additional Information OEM No.65710-65 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages660

Replica chrome header set.Set will accept heat shields. Order clamps and muffler separately. Fits:XLCH 1957-1978XL 1957-1978XLH 1957-1978Additional Information OEM No.65491-62 UOM1 - KIT FinishChrome ManufacturerV-Twin OriginImported 2025 Catalog...

Chrome exhaust header set consists of a front pipe and a rea r pipe for solo models. Fits:WL 1937-1952Additional Information OEM No.65490-41 UOM1 - SET ManufacturerV-Twin OriginUSA

Raw exhaust header set consists of a front pipe and a rear pipe for solo models.*NOTE: Order clamps, muffler, flex covers or any other pieces needed separately. Fits:WL 1937-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025...