Chrome spring fork is 4" longer than stock.Includes axle and top clamp. Stem has a 1" x 24 thread. Axle is ¾" outer diameter. Height is measured from the top of the fork leg (where the triple tree fits), to the axle position. Fits:XL 1949-2004Additional...

Chrome spring fork is 2" longer than stock.Includes axle and top clamp. Stem has a 1" x 24 thread. Axle is ¾" outer diameter. Height is measured from the top of the fork leg (where the triple tree fits), to the axle position. Fits:XL 1949-2004Additional...

Standard chrome spring fork.Includes axle and top clamp. Stem has a 1" x 24 thread. Axle is ¾" outer diameter. Height is measured from the top of the fork leg (where the triple tree fits), to the axle position. Fits:XL 1949-2004Additional Information ...

Glide damper kit is for use on two fork legs. Kit is genuine NOS from Harley Davidson.This is a 5 piece kit. Limited supply of this kit. Fits:FL 1949-1976Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages602

Fork tube cover set for XLCH models with gator fork boots installed.Tube sleeves cover the bare tubes between the upper and lower triple tree. Fits:XL 1959-1972Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages909

Chrome replica set includes lower bearing pressed on, dust shield set and upper bearing with cone nut. Fits:FL 1960-1968Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported StyleStock 2025 Catalog Pages606

28" Spring Fork kit is black with brass plated rockers, springs, top tree and axle nuts.Use post risers with stud to top of rear fork legs. Legs thread are 1/2" x 20. Fits:FX 1970-1984FL 1941-1984EL 1936-1982FXST 1986-2017FLST 1986-2017Additional...

26" Spring Fork kit is black with brass plated rockers, springs, top tree and axle nuts.Use post risers with stud to top of rear fork legs. Legs thread are 1/2" x 20. Fits:FX 1970-1984FL 1941-1984FXST 1986-2017FLST 1986-2017EL 1936-1952Additional...

24" Spring Fork kit is black with brass plated rockers, springs, top tree and axle nuts.Use post risers with stud to top of rear fork legs. Legs thread are 1/2" x 20. Fits:FX 1970-1984FL 1941-1984FXST 1986-2017FLST 1986-2017EL 1936-1952Additional...

22" Spring Fork kit is black with brass plated rockers, springs, top tree and axle nuts.Use post risers with stud to top of rear fork legs. Legs thread are 1/2" x 20. Fits:FX 1970-1984FL 1941-1984FXST 1986-2017FLST 1986-2017EL 1936-1952Additional...

20" Spring Fork kit is black with brass plated rockers, springs, top tree and axle nuts.Use post risers with stud to top of rear fork legs. Legs thread are 1/2" x 20. Fits:FX 1970-1984FL 1941-1984FXST 1986-2017FLST 1986-2017EL 1936-1952Additional...

18" Spring Fork kit is black with brass plated rockers, springs, top tree and axle nuts.Use post risers with stud to top of rear fork legs. Legs thread are 1/2" x 20. Fits:FX 1970-1984FL 1941-1984FXST 1986-2017FLST 1986-2017EL 1936-1952Additional...

25-1/2" Spring Fork kit is black with chrome springs. Spring Forks are offset. Top triple tree is machined chrome design without ears. Use post risers with stud to top of rear fork legs. Legs thread are 1/2" x 20.For use with 1" taper bearing kit, order...

24" Spring Fork kit is black with chrome springs. Spring Forks are offset. Top triple tree is machined chrome design without ears. Use post risers with stud to top of rear fork legs. Legs thread are 1/2" x 20.Includes 3/4" axle assembly. The rockers are...

22" Spring Fork kit is black with chrome springs. Top triple tree is machined chrome design without ears. Use post risers with stud to top of rear fork legs. Legs thread are 1/2" x 20.Includes 3/4" axle assembly. The rockers are the same as the OEM...

20" inline Spring Fork kit is black with chrome springs. Top triple tree is machined chrome design without ears. Use post risers with stud to top of rear fork legs. Legs thread are 1/2" x 20.Includes 3/4" axle assembly. The rockers are the same as the...

18" Spring Fork kit is black with chrome springs. Top triple tree is machined chrome design without ears. Use post risers with stud to top of rear fork legs. Legs thread are 1/2" x 20.Includes 1" fork stem and 3/4" axle assembly. The rockers are the same...

Polished 7" headlamp cowl kit with 55/60 watt H-4 unit features a chrome outer headlamp rim.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs. Fits:FL...

Chrome 7" headlamp cowl kit with 55/60 watt H-4 unit.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs. Fits:FL 1960-1984Additional Information UOM1 - KIT ...

Xl Fork triple tree assembly includes an upper aluminum triple tree and black forged lower tree.*NOTE: Order neck cup, bearing races and hardware installation separately. Fits:XL 1957-1972 33.4mm fork tubesAdditional Information UOM1 - KIT ...

Chrome handlebar clamp cover includes cigarette lighter for use on Wide Glide forks.Cover is like original alloy constructed clamp cover. Handlebar clamp cover mounts to stock wide glide steel triple tree. Screws not included. Fits:FL 1960-1984Additional...

Kit included chrome upper and lower cups with races, bearings, and dust shields.For use on steel triple tree applications. Features a built in fork stop on the lower cup to accept 1988-1999 FXST lower fork stem with integral stop. This kit can also be...

Polished handlebar clamp cover includes cigarette lighter for use on Wide Glide forks.Cover is like original alloy constructed clamp cover. Handlebar clamp cover mounts to stock wide glide steel triple tree. Screws not included. Fits:FL...

Black fork cover kit is Hydra-Glide style and has a 3 rib design. Includes the front panel, top tree cover, fork slider cover, right panel, left panel and mounting screw kit.Restoration quality is exact for 1955-59 but will fit all 1949-59 FLH models. ...

Black fork damper kit for FL models with drilled and tapped fork stem.Kit includes the damper knob kit, triple tree top nut, damper plate kit, and a damper anchor plate frame pin. Fits:FL 1949-1959G 1958-1973Additional Information UOM1 - KIT ...

Includes chrome top acorn nut, lower cone nut, upper and lower dust cover, and tapered bearings. Fits:FXST 1984-1999FLST 1986-1999FL 1960-1994Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages284

Chrome acorn stem nut has classic profile, with 1"-24 threads. Nut has shoulder alignment.For Big Twin Spring Fork and Glider forks with 1" x 24 TPI. Fits:FL 1941-1984FL 1936-1954Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025...

Glide top fork nut is zinc Fits:FL 1960-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages608

Top triple tree features a black finish and includes bushings that are pressed in place. Fits:FLH 1960-1972Additional Information OEM No.56121-60 UOM1 - EA ManufacturerV-Twin OriginImported Replacement Items28-1949 - Riser Bushing and Washer Kit

Fork cover tab set is constructed of raw cast steel, Set is for use on a 1949-84 FLH wide glide style triple treeSold as a pair. Set is for both sides. Tab set can be used on the lower triple tree on the G model. Side is drilled and tapped with 5/16 x...

Stem cone nut for spring fork front ends with internal race features a nickel plated finish, as original.Dust shields included. Restoration quality, exact replacement for 1936 EL and UL models! ...

XL fork tube conversion kit includes all components to convert 1957-1970 Sportster fork legs to "1971" type.NOTE: 1957-1970 lower legs do not have a seal provision. Use the original lowerlegs and drill the lower hole to 7/16" to accept hex bolts,...

Polished right and left 41mm Glide fork slider set for the left side drum brake.Lower leg set accepts 1977-1984 type seals. The tube fits directly into the leg without bushings. *NOTE: Bushings...

Black replica set includes lower bearing pressed on, dust shield set and upper bearing with cone nut. Fits:FLH 1948-1959Additional Information UOM1 - SET ManufacturerV-Twin OriginImported StyleStock

Front brake cable kit is zinc plated with proper alloy assembly.NOTE: THis is correct for 1949 applications only, but will fit later models. Fits: EL 1949-1949 FL 1949-1963 Additional Information UOM 1 - KIT Manufacturer V-Twin Origin Imported ...

Spring Fork cone nut kit for Big Twins includes cup set, lower race and collar, nickel top cone nut with races built in and an acorn top nut. Fits:EL 1936-1948FL 1941-1948Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025...

Set accepts 41mm fork tubes. Lower tree does not have lock tab. Tree has a center damper knob hole. Fits:FL 1960-1968Additional Information UOM1 - SET ManufacturerV-Twin OriginImported StyleStock 2025 Catalog Pages606 Replacement Items24-0830 -...

Black replica set includes lower bearing pressed on, dust shield set and upper bearing with cone nut.Top tree accepts riser bushing kit, V-Twin #28-0221. The lower tree includes lock tab. Fits:FL 1960-1972FLH 1973-1984Additional Information UOM1 - KIT ...

Black replica set includes lower bearing pressed on, dust shield set and upper bearing with cone nut. The lower tree is without the lock tab. Fits:FL 1960-1968Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported StyleStock 2025...

Black replica set includes lower bearing pressed on, dust shield set and upper bearing with cone nut. Fits:FL 1949-1959Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported StyleStock 2025 Catalog Pages606 Replacement Items24-0830 -...