Chrome Daniel Boone forward control kit includes left side shifter and a right side brake only to accept Kelsey type rear master cylinder.Accepts Kelsey type master cylinder. Order brake line and master cylinder seperately. ...

Police style jockey shift kit clamps to all front down 1-1/8" tubes for 4-speed ratchet type. Kit includes a smooth gate without detents for shifting.This is an offset handle for use with 5 gallon bobbed tanks. Shift lever assembly and shift rod feature...

Police style jockey shift kit clamps to all Big Twin 1-1/8" front down tubes and is for 4-speed transmission with handshift top. Kit includes a gate with detents. The handle is offset for 5 gallon bobbed tanks. Fits:FX 1971-1979FL 1941-1979Additional...

Kit includes plate, springs, shoes, cam, and pivot stud assembled and ready for installation.NOTE: On 1936-1957 Big Twins, the brake arm faces rearward and in. Order arm separately. Includes stamped brake shoes with fitted linings. Fits:VL 1937-1948EL...

Kit includes plate, springs, shoes, cam, and pivot stud assembled and ready for installation.NOTE: On 1936-1957 Big Twins, the brake arm faces rearward and in. Order arm separately. Includes stamoed brake shoes with fitted linings. Fits:VL 1937-1948EL...

Parkerized brake control kit for use with mechanical brake frames with a cross shaft tube only. Footboards may be used with this kit.On 1936-1957 Big Twins, the rear brake lever arm faces rearward and in. ...

Chrome brake control kit for mechanical brake frames with a cross shaft tube only. Footboards may be used with this kit.Must order the clutch cable separately. NOTE: On 1936-1957 Big Twins, the rear brake lever arm faces rearward and in. ...

Chrome jockey shifter control kit is ratchet and pedal type with a slap stick style.Kit includes chrome jockey pedal and plate, a foot clutch lever rod, lever rod end, jockey shifter lever with a 3/8" x 24 thread. Will not work with floorboards. ...

Mousetrap clutch booster assembly kit for 1952-1967 Big Twin modelsFor use with tin inner primary models only; 1936-1952 EL and 1941-1964 FL. Clutch release arm is available separately. *Note: UPS may consider this part as packaged "oversize" for...

Chrome forward control kit features left side brake and right side shift for models with mechanical brakes.The splines on the shifter lever are coarse. Order longer motor mount bolts separately. Fits:XLH 1957-1974XLCH 1957-1974Additional Information ...

Daniel Boone chrome brake control kit fits all hydraulic brake models with disc brakes, for rigid or swingarm frames. Includes correct linkage for 4 speed 1979-1984 rotary top models and chrome Kelsey Hayes type master cylinder.Mounts to frame with 3/8 x...

Rigid forward brake pedal kit components are chrome and features the FXST style position.Includes pedal, plate, short rod, footpeg, and cross shaft arm. ...

Parkerized brake control kit for use with mechanical brake frames with a cross shaft tube only. Includes a parkerized stop lamp switch.*NOTE: On 1936-1957 Big Twins, the rear brake lever arm faces rearward and in. Fits:UL 1936-1948EL 1936-1940FL...

Lee style jockey pedal assembly features a chrome plate and pedal, black OE frame bracket and parkerized mount bolt kit.The bracket is for mounting to the frame. *NOTE: Must order clutch pull rod separately. Fits:FX 1971-1984FL 1941-1984EL 1936-1952U...

Mousetrap clutch booster assembly kit includes ball crank with offset and two mount hole positions for rod. Kit features a natural finish.Booster assembly is generally referred to as "Mousetrap" in the chopper world. Fits:FL 1965-1967Additional...

Replica kick starter kit features one piece black forged arm and spring. Kit is assembled.Ratchet kicker gear is 16 tooth. Includes parkerized nuts, washer, and spring stud. Kick starter arm is painted black, arm shows forging marks as original. Has MFG...

Jockey shifter control kit is for ratchet top and pedal type models and is slap stick style.Kit comes complete with the correct clutch release. Fits:FL 1952-1978Additional Information UOM1 - KIT FinishChrome ManufacturerV-Twin MaterialSteel ...

Heel toe shifter kit includes a shift mount plate, inner arm with spline and spline heel toe shifter lever with 2 rubber footpegs.For use with FLH ratchet and rotary top. ...

Mechanical brake kit features a parkerized finish. Kit does not include pedal, pedal plate and rear rod.*NOTE: On 1936-1957 Big Twins, the rear brake lever arm faces rearward and in. Fits:UL 1936-1948EL 1936-1940FL 1941-1957Additional Information UOM1 -...

Chrome partial forward control kit includes cable ends, bolts and nuts.*NOTE: Extra hardware will be required for installation. Fits:XL 1954-1974Additional Information UOM1 - KIT FinishChrome ManufacturerV-Twin MaterialSteel OriginImported

Hydraulic brake control kit has a chrome master cylinder, chrome brake pedal, spring, plunger assembly, clevis pin, mount plate, master cylinder spacers, bolts, nuts, and washers.Requires footboard mount kit to install footboards on forward brake kits...

Hydraulic brake control kit has a Replica cast iron master cylinder which is painted silver, chrome brake pedal, mount plate, spring, plunger assembly and brake pedal pin, and a master cylinder spacer, bolts, nuts, and washers.Requires footboard mount...

Kit includes chrome brake pedal with bushing, plunger assembly, mount plate, spring, master cylinder spacer, and zinc clevis pins.Requires footboard mount kit to install footboards on forward brake kits. Fits:FL 1958-1969Additional Information UOM1 -...

Partial 4-speed kick starter kit includes all components except the arm, cover and pedal.Includes the clutch lever finger shaft assembly. Order clutch lever shaft and finger kit to complete assembly, available separately. *NOTE: When installing any type...

V-Twin kick starter kit incldes a reinforced polished kick starter cover, chrome arm and all gears and hardware to make conversion complete.Includes a chrome offset arm to fit 1941-1984 FLH models with chrome spring. *NOTE: When installing any type of...

V-Twin kick starter kit incldes a reinforced chrome plated kick starter cover, chrome arm and all gears and hardware to make conversion complete.Includes a chrome offset arm to fit 1954-1984 FL models, with chrome springs. *NOTE: When installing any type...

Brake pedal assembly includes pedal, spring, and mount strap for 45 models in a chrome finish. Fits:G 1936-1973W 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages808

Kit features a black finish and includes a plate, springs, replica shoes, cam and pivot stud.Includes #23-1750 cast replica brake shoes with riveted linings. Some sanding may be required for exact fit. Order arm separately. **NOTE: On 1936-1957 Big...

Kit features a chrome finish and includes a plate, springs, replica shoes, cam and pivot stud.Includes #23-1750 cast replica brake shoes with riveted linings installed. Some sanding may be required for exact fit. Order arm separately. **NOTE: On...

Servi-car shift lever kit features a chrome gate and hand lever with a zinc plated rod.. Fits:G 1947-1973 for Servi-Car modelsAdditional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages807 Replacement Items21-0475 -...

Kit includes plate, springs, shoes, cam, and pivot stud assembled and ready for installation.*NOTE: On 1936-1957 Big Twins, the brake arm faces rearward and in. Order arm separately. Includes stamped brake shoes with fitted linings. Fits:VL 1937-1948EL...

Kit includes plate, springs, shoes, cam, and pivot stud assembled and ready for installation.*NOTE: On 1936-1957 Big Twins, the brake arm faces rearward and in. Order arm separately. Includes stamped brake shoes with fitted linings. Fits:VL 1937-1948EL...

AEE shifter pedal plate is zinc plated steel. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA Tech NoteSuggested to use with #22-0637 AEE Foot Shifter Assembly.

Aluminum and stainless constructed clutch cable bracket for all 4-speed transmission fitted with a FLH style ratchet top.Kit includes the cable bracket, ratchet drum mount and related hardware. Accepts 1968-1984 style 5/16" adjuster screws. Use with the...

Foot shifter lever features a stainless steel finish. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA FinishStainless ManufacturerV-Twin MaterialSteel OriginImported Tech NoteSuggested to use with #22-0637 AEE Foot Shifter Assembly.

Daniel Boone jockey pedal kit features a chrome finish and is for left side mounting on 1941-1984 FL models. Kit features three bolt mounting that will accept kickstand assemblies. Fits:FL 1941-1984Additional Information UOM1 - KIT ManufacturerV-Twin ...

Kit includes chrome cast 4-speed gate for the 1936-1946 tanks with the cateye dash, and the arm to bolt to the shifter arm on the transmission. Original atlas design from the 1940's.Kit allows forward gear up shifting for 1936-1946 models. No need to...

Shifter rod kit features a zicad plated finish. With hook end to accept cotter pin.*NOTE: Zicad is a dull shade of zinc similar to cadmium. Fits:FL 1941-1957U 1937-1948EL 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported ...

Shifter knob has 3/8 x 24 thread and is shaped like an Evolution engine. Fits:FL 1941-1965G 1941-1973W 1941-1952Additional Information UOM1 - EA MeasurementsAdditional InformationHeight: 2-3/4"Width: 1-3/8"Length: 2-5/8" ...

Chrome plated steel tubular style hand shifter lever includes cup, original style black ball, spring and cotter pin. Ball is threaded 3/8" x 24.Tubular shift lever is exact replica for 1936 EL models. Does not use a bronze bushing or nut. Bronze bushing...