Spring fork stud bushing set short. Fits:WL 1930-1952Additional Information UOM4 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages781

Cadmium full rebuild kit for shackle bar for spring brake contains all wear parts needed to restore the front brake shackle assembly. Fits:UL 1937-1948EL 1937-1948G 1940-1957WL 1940-1952FL 1941-1948Additional Information UOM1 - KIT LocationFront ...

Brass intake manifold seals have a 1-9/16" inside diameter.Set of two. Fits:UL 1937-1948EL 1936-1939WLD 1940-1946VL 1930-1936WL 1932-1936Additional Information OEM No.27057-30 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages712 ...

Stock headbolt kit with washers features a zinc finish. Fits:FX 1971-1984FL 1948-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Parkerized Linkert air cleaner mount screw and lock kit includes four screws, two lock plates and lock tab. Fits:FL 1941-1965WL 1941-1952UL 1941-1948Additional Information OEM No.29060-56 UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog...

Chrome gas shut off extension knob. Fits:FL 1940-1965Additional Information OEM No.91690-49 UOM1 - EA ManufacturerV-Twin OriginImported

Rear chain adjuster features a parkerized finish.Chain adjuster features a 3/8 - 24 thread with a hex head. Fits:FL 1941-1972UL 1937-1948EL 1936-1940Additional Information OEM No.41576-36 UOM1 - EA ManufacturerV-Twin OriginImported

Zinc 6 volt battery terminal studs have an overall length of 1-1/4". Kit includes two studs, two nuts, two felt washers, and battery pad set, for H-2 batteries. Fits:VL 1930-1934EL 1936-1940WL 1929-1952FL 1941-1964J 1929-1930UL 1938-1948Additional...

Spring fork chrome acorn nut and cadmium retainer set Fits:UL 1937-1948G 1936-1957WL 1936-1952EL 1936-1940FL 1941-1948Additional Information OEM No.45647-30 UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages784

Cadmium Oil Line Fitting Fits:EL 1936-1940FL 1941-1964UL 1938-1948Additional Information UOM3 - PK ManufacturerV-Twin OriginImported 2025 Catalog Pages798

Sprocket shaft seal kit replaces the treaded oil slinger. Fits:FL 1941-1954EL 1936-1940Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages1312

Retainer and seal kit for the sprocket shaft Fits:FL 1955-1968Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Chrome front motor mount acorn style bolts are extra long at 7.5". Fits:XL 1957-1983Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Brass manifold seals are for 1937-1973 45" models Fits:WL 1937-1952G 1937-1973Additional Information OEM No.27058-38 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages806

V-Twin - 73-0293 - Panhead Phillips Screw 1/4 inch-30 x 1 inch Stainless SteelDescriptionStainless steel Panhead Phillips screw, 1/4"-20 x 1",is sold in a pack of 5. Fits:All modelsAdditional Information UOM5 - PK ManufacturerV-Twin OriginUSA

V-Twin - 73-0292 - Panhead Phillips Screw 10-24 x 3/16 inch Stainless SteelDescriptionStainless steel Panhead Phillips screw, 10-24 x 3/16", is sold in a pack of 5. Fits:All modelsAdditional Information UOM5 - PK ManufacturerV-Twin OriginUSA

V-Twin - 73-0291 - Panhead Phillips Screw 8-32 x 3/16 inch Stainless SteelDescriptionStainless steel Panhead Phillips screw, 8-32 x 3/16", is sold in a pack of 5. Fits:All modelsAdditional Information UOM5 - PK ManufacturerV-Twin OriginUSA

V-Twin - 73-0236 - Zinc Phillips Panhead ScrewsDescriptionPanhead phillips screws are 1/4-20 x 3/4" and features a zinc finish.Sold in a pack of 5. Fits:Custom applicationAdditional Information UOM5 - PK ManufacturerV-Twin OriginImported

The intake manifold nipple has threaded inserts that screw into head of cylinder. Sold each. Fits:FL 1940-1954Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages713

45" WL frame and fork kit includes a replica 45" W rigid frame, a black 28" inline Spring Fork assembly and a zinc fork neck cup set.The stock replica Spring Fork assembly accepts all original style components and accessories for a detailed restoration...

45" WL 3 piece set includes a chrome inline Spring Fork speedster handlebar, replica 45 W rigid frame and a 28" Spring Fork assembly in a chrome finish.Set includes fork, bars and rear stand. Before primer and paint, the frame will require de-greasing...

Frame and rork kit includes straight leg rigid frame, a 1" overstock inline black spring fork and an inline Spring Fork handlebar. The 1" compliments the 30  frame. Assembly accepts Shovelhead or Panhead motors. Fits:FX 1970-1984FL 1948-1984Additional...

Frame and fork kit includes replica Knucklehead 30  rake frame and 28" offset spring fork assembly that features a chrome finish.Must order neck cup and race separately. *NOTE: There are no serial numbers stamped on the replica frame. V-Twin MFG supplys...

Frame and fork kit includes replica retro rigid 30  rake frame and 32" inline spring fork unit that features chrome front legs, outer springs, rockers and chrome rear leg.*NOTE: There are no serial numbers stamped on the replica frame. V-Twin MFG supplys...

Frame and fork kit includes replica wishbone frame kit and 28" offset spring fork assembly that features a chrome finish.30  neck wishbone frame includes seat post, transmission plate and rear axle kit. For mechanical brakes only. ...

Frame and fork kit includes replica wishbone frame kit and black 28" offset spring fork assembly. Kit includes rear axle assembly, transmission mount plate, seat post assembly, and brake cross shaft with bushings installed.Will accept 1948-84 Panhead or...

Frame and fork kit inlcudes a replica retro rigid 30  rake frame and 32" inline spring fork assembly that features a black finish.Frame will accept Panhead or Shovelhead engine with 4-speed transmission, also accepts Knuckle or Flathead engines with use...

Frame and fork kit includes replica wishbone frame kit and 28" offset spring fork assembly that features a chrome finish.Frame will accept Panhead or Shovelhead engine with 4-speed transmission, also accepts Knuckle or Flathead engines with use of a 3/8"...

Frame and fork kit includes replica wishbone frame kit and black 28" offset fork assembly. Kit includes wish bone 30  frame, rear axle assembly, transmission mount plate, seat post assembly and brake cross shaft with bushings installed.Frame will accept...

Shock for Side Valve models measures 11-1/2" collapsed and 7-3/4" extended.Warning: Installing a lowering kit or shorter shocks will decrease initial ground clearance. The motorcycle will be lower to the ground and care should be taken to avoid...

Chrome shock stud kit includes all pieces for upper and lower positions including washers, nuts and lock washers. Has stud for 5/8" shock eyelet. Fits:FL 1958-1964Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages641 ...

Shock stud kit includes all pieces for upper and lower positions. Kit includes washers, nuts and lock washers and stud for 5/8" shock eyelet. Fits:FL 1958-1964Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages641 ...

Shock stud kit includes all pieces for upper and lower positions. Kit includes washers, nuts, & studs. Has stud for 5/8" shock eyelet. Fits:FL 1965-1966Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages641

Shock stud kit includes all pieces for upper and lower positions. Kit includes washers, nut and lock washers. Kit features a zinc finish. Fits:XL 1956-1974Additional Information UOM1 - KIT MeasurementsAdditional InformationShock Shaft: 5/8" ...

Chrome lower rear shock stud kit includes four cup washers and two studs. Has stud for 5/8" shock eyelet. Fits:FL 1958-1964Additional Information OEM No.54517-58 UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages641

Chrome upper rear shock stud kit includes four cup washers and two studs. Studs have 3/8" thread. Fits:FL 1958-1964Additional Information OEM No.54515-58A UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages641

Zinc stock stud spacers replace 5960W on 1965-1985 FLH when rear frame bars are not used. Fits:FL 1965-1984Additional Information OEM No.5960W UOM2 - PK ManufacturerV-Twin OriginUSA 2025 Catalog Pages641

Zinc 5/8" hole shock stud flat washer Fits:K 1952-1956FL 1958-1964XL 1957-1964Additional Information UOM10 - PK ManufacturerV-Twin OriginUSA 2025 Catalog Pages641

Zinc Nyloc shock stud nut is 5/8-18 UNC thread. Fits:XL 1957-1974KH 1954-1956FX 1971-1984FL 1958-1984Additional Information OEM No.7993 UOM10 - PK ManufacturerV-Twin OriginUSA 2025 Catalog Pages641

Chrome 1/2" hole cup shock stud washers Fits:FL 1965-1984FX 1971-1984XLH 1972-1974Additional Information OEM No.54545-65 UOM10 - PK ManufacturerV-Twin OriginUSA 2025 Catalog Pages641