Frame top engine mount is two halves with seat tee and rear tank mounts incorporated into the top mount. Weld in place for accurate restoration. Fits:FL 1948-1952Additional Information UOM1 - SET ManufacturerV-Twin OriginUSA TypeRigid 2025 Catalog...

Rear pipe frame tab. Fits: FL 1958-1984 Additional Information UOM 1 - EA Manufacturer V-Twin Origin Imported Type Rigid 2025 Catalog Pages 639

Brake line tee tab. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA TypeRigid

Cable mount frame tab is for under tank. Fits:FL 1955-1972Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeRigid 2025 Catalog Pages639

This original style frame mechanical brake shaft crossover tube includes one bushing, and grease fitting. Fits:UL 1938-1947EL 1936-1940FL 1941-1957Additional Information UOM1 - EA MeasurementsAdditional InformationLength: 6-1/4" ...

Upper shock frame mounts are weld on style for stock frames.Sold as a set of two. Fits:FL 1965-1984FX 1971-1984Additional Information UOM1 - SET ManufacturerV-Twin OriginImported TypeSwing Arm

Upper shock frame mounts are weld on style for stock frames.The top shock mount forgings to fit 1958-64 FL, or to convert the 1965-84 frame to the lower seat area configuration, to fit a 6V battery only, as original! Sold as a set of two. ...

Casting top seat mount is for frame seat post, frame back bone and frame upper seat rail yoke. Fits:FL 1958-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeRigid 2025 Catalog Pages638

Lower tank frame mount with cross plate.Must be welded in place. The mount hole center to center measures 1-3/4" and the small end grasp area sits 1-1/2" high from the plate. Fits:FL 1948-1954Additional Information UOM3 - SET MeasurementsAdditional...

Frame mount tab set for solo seats have weld on mount tabs. Use with T bar and pivot bolt to mount K and CH solos. Fits:XL 1957-1979Additional Information UOM1 - SET ManufacturerV-Twin OriginUSA StyleStock 2025 Catalog Pages822 Tech NoteSuggested...

Rigid Big Twin crossover shaft frame brace comes in left and right. Fits:UL 1938-1947EL 1936-1940FL 1941-1957Additional Information UOM1 - SET ManufacturerV-Twin OriginImported TypeRigid

This weld on style coil mount frame block set repairs stock frames and has a 3/8"-24 UNF thread. Fits:FL 1956-1983FX 1971-1983Additional Information UOM1 - SET ManufacturerV-Twin OriginImported TypeRigid

Frame top engine mount is two halves with seat tee and rear tank mounts incorporated into the top mount. Weld in place for accurate restoration.*NOTE: Threaded for seat "T" bolt. Fits:FL 1953-1969Additional Information UOM1 - SET ManufacturerV-Twin ...

Rigid frame front oil tank mount casting to be welded on.Thread is 5/16 x 24 and the lip from the bottom to the top measures 1-1/4". For use with 1-1/2" bar. Fits:FL 1941-1984FX 1972-1984EL 1938-1940Additional Information UOM1 - EA ManufacturerV-Twin ...

Rear frame engine mount and front transmission mount. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeRigid 2025 Catalog Pages638

Neck frame forging has a 30  rake with key hole. Machined to accept neck lock tumbler.Forged neck is accomplished in 4 stages: First the steel is fired as red hot ingot, next huge hammers compact and orient the grain structure into a rough shape of the...

Rigid frame rear engine mount and front transmission mount. Fits:UL 1938-1947EL 1936-1940FL 1941-1957Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeRigid 2025 Catalog Pages638

Oil tank lower tab kit. Fits:UL 1938-1947EL 1936-1940FL 1941-1957Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages742

Rigid frame side car loop set to be welded on for restoration or repair. The loops are machined spools. Fits:EL 1936-1940FL 1941-1957Additional Information UOM1 - SET MeasurementsAdditional InformationOuter Diameter: 1.689"Inner Diameter: 0...

Rear tank frame mount tabs. Fits:FL 1941-1984EL 1936-1947U 1937-1948Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages729

New Old Stock" Frame gusset plate is for the left side on swingarm frames.New Old Stock from the 1980's, part has rust and oxidation! Fits:FL 1958-1968FLH 1958-1968Additional Information OEM No.47261-68 UOM1 - EA ManufacturerV-Twin OriginUSA ...

Weld on frame footpeg mount without thread.Mount can be welded to 1958-1977 swingarm frames to utilize the stock FXE mount and raise the peg position. Sold as a pair. Fits:FX 1971-1978FL 1958-1984Additional Information UOM1 - SET MeasurementsAdditional...

Rigid frame 5th transmission mount to be welded on for restoration or repair. Fits:EL 1936-1940FL 1941-1957Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA TypeRigid 2025 Catalog Pages638

Wishbone side car mount set is for rigid frames and features the new forge tooling for accurate replication including the forging number detail. Set is for use with wish bone frames only. Fits:FL 1948-1953EL 1948-1953Additional Information UOM1 - SET ...

Brake cross shaft kit is for stock and replica rigid frames.Includes right side tube with bushing, strap bracket set and grease fitting. Fits:FL 1941-1957EL 1936-1948Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported TypeRigid

Kit mounts to adapt 1957-1985 Ironhead motors into 1986-2003 XL rigid frames.Ironhead motor installation kit includes front and rear mounts and hardware. Fits:XL 1957-2003Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Raw steel neck lock pin only. Fits:FL 1948-1968VL 1930-1936Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

45" front engine clutch cable mount features a raw finish and must be welded to the center tube. Fits:G 1941-1973W 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeLock Washer 2025 Catalog Pages815

Front engine brake strap. Fits:W 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages815

Front engine coil mount. Fits:W 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages815

Front engine top motor mount. Fits:W 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages815

45" transmission and motor base forging set holds transmission and connects center post and front down tube.2 pieces welded as an assembly. Fits:W 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages815

Weld on hardtail assembly features a raw finish, forged cross bar and rear axle plates on original WL 45 solo's.Installation requires a qualified fabricator and welder. Must be welded on and the fabricator must construct pieces to connect to frame...

Front engine mount weld on frame brace for 45 solo frames.*NOTE: Frame parts are forged and machined using tooling exclusively by V-Twin MFG. Fits:W 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeWeld-on 2025 Catalog...

45" Side Valve Rigid cast neck is constructed of raw steel forging and is machined to accept stock size frame tubes.Accepts 7/8" neck cups, not included. *NOTE: Frame parts are forged and machined using tooling exclusively by V-Twin MFG. ...

Rear frame engine mount and front transmission mount for 45 solo frames, and features a raw steel construction.Has a hole for the rear clutch and brake strap shaft, the shaft holds the brake bell crank on the right side. Fits around the center seat post...

45 front control rod forging features a raw finish.Braze on to front down tube to support brake and clutch strap, and jiffy stand on the left side. Fits:W 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog...

Replica rear hardtail frame section is duplicated from an original rigid frame. Weld-on type and does not have seat post bushing.The rear transmission mounts are 1-1/2" tall. This hardtail includes rear transmission mount, tool box bracket, fender cross...

Rear frame right and left axle plates with oiled raw steel finish for 45 solo frames, constructed of forged steel.Must be welded in place. ...

45 WL rear fender mount brace is original style featuring raw steel forging that attaches to frame rails.*NOTE: Frame parts are forged and machined using tooling exclusively by V-Twin MFG. Fits:W 1936-1952Additional Information UOM1 - EA ...