Center kickstand kit is constructed of cast aluminum and includes spring, and hardware for mounting to stock swingarm frames. Fits:XL 1957-1981K 1952-1956Additional Information OEM No.49701-57 UOM1 - KIT FinishRaw ManufacturerV-Twin OriginImported ...

Chrome kickstand tab kit includes washer, acorn nut, and tab . Fits:FXST 1984-1999FX 1971-1984EL 1936-1940FL 1941-1984Additional Information OEM No.50309-02 UOM1 - KIT FinishChrome ManufacturerV-Twin OriginImported 2025 Catalog Pages42

Constructed of steel and chrome plated, this adjustable kickstand stop is installed on the kickstand shaft to prevent the leg from banging into the primary case. Fits:FLST 1986-1990UL 1938-1947FXST 1984-1990FX 1971-1984EL 1936-1940FL 1941-1984Additional...

Chrome kickstand mounting kit includes kickstand mount, spring, leg stop, and spring plate. Kickstand measures 11-1/2" from bend to top. Fits:UL 1938-1947FX 1971-1984EL 1936-1940FL 1941-1984Additional Information UOM1 - KIT FinishChrome ...

Chrome kickstand mount bracket is without holes in the face of the bracket, as original. Fits:UL 1938-1947FX 1971-1984EL 1936-1940FL 1941-1984Additional Information OEM No.50049-36 UOM1 - EA FinishChrome ManufacturerV-Twin OriginImported 2025...

Chrome kickstand spring plate. Fits:FLST 1986-1990UL 1938-1947FXST 1984-1990FX 1971-1984EL 1936-1940FL 1941-1984Additional Information OEM No.50036-36 UOM1 - EA FinishChrome ManufacturerV-Twin OriginImported 2025 Catalog Pages287

Stop your kickstand from hitting your primary cases by installing this steel leg stop on your kickstand shaft. Fits:FLST 1986-2006FXST 1984-2006FX 1971-1984EL 1936-1940FL 1941-1984Additional Information OEM No.50015-74 UOM1 - EA FinishChrome ...

Half moon footboard set features chrome footboards with chrome ribbed inserts.Mounting bracket features 10" spacing. Fits:G 1940-1965FL 1940-1965Additional Information UOM1 - SET ManufacturerV-Twin OriginImported StyleHalf Moon 2025 Catalog...

Half moon footboard set features black footboards with ribbed chrome inserts.Set includes a "Tedd Cycle Patch". Black rivets are included. Inserts are not installed. Mounting bracket features 10" spacing. ...

Stamped forged steel footboard mount tab set. Fits:EL 1936-1940FL 1941-1984UL 1936-1940Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages638

Kickstand shaft washer set installs between the stand and the bracket. Features a zinc plated finish.Used to adjust the height when the stand is attached to the bracket. Fits:FL 1941-1985Additional Information UOM1 - SET ManufacturerV-Twin ...

Zinc plated primary footboard mounting kit includes hardware and extended rear footboard bracket for use with custom drag or muffler pipes.Kit is for use with OE type exhaust systems. *NOTE: Includes hardware and all components shown in picture. Fits:FL...

Zinc oval inspection cover for the left side with footpeg spline.. Fits:FL 1965-1984Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages1075

Zinc splined footpeg support is for the right side and is offset type.Mounting hole inner diameter measures 3/4". Fits:FL 1965-1977Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Replacement ItemsThis Item is not available. Please...

ISO mount swingarm chain guard has a black finish and comes with rubber bushing and rear bracket.Can also be used on 1958-1984 FL for the lighter FX look. Fits:FX 1966-1978FL 1958-1984FXE 1971-1984Additional Information UOM1 - EA FinishBlack ...

Replica black chain guard is FLH style and is for swingarm frames. Fits:FL 1958-1962Additional Information OEM No.60302-58 UOM1 - EA FinishBlack ManufacturerV-Twin OriginImported 2025 Catalog Pages624

FLH style full chain guard has a gloss black finish and includes bushing. Fits:FL 1963-1982Additional Information OEM No.60302-63 UOM1 - EA FinishBlack ManufacturerV-Twin OriginImported 2025 Catalog Pages624

FLH style full chain guard has a chrome finish and includes bushing.Center hole to center hole measures 10-5/8". Fits:FL 1963-1982Additional Information OEM No.60302-63 UOM1 - EA FinishChrome ManufacturerV-Twin OriginImported 2025 Catalog Pages624

Replica Linkert carburetor low speed needle valve is type (1) large head and a large knurl knob head. The overall length is 4" with 1/4"-40 threads.Spring fits over needle valve head, which is held in place with a fillister screw. Check the order of...

Lower front mount tie rod ball joint.The ball diameter is 1.259", the step downo from that is .940", the center is 1.007", the step down from the center is .857" and the end is 1.012". Fits:VL 1930-1933FL 1941-1984JD 1924-1929EL 1936-1952UL...

Rear wheel brake rod and cable adjusting nut features a cadmium finish. Fits:XL 1957-1978K 1952-1956KH 1952-1956Additional Information UOM1 - EA FinishCadmium ManufacturerV-Twin OriginUSA

Rear wheel brake rod and cable adjusting nut features a chrome finish. Fits:XL 1957-1978K 1952-1956KH 1952-1956Additional Information UOM1 - EA FinishChrome ManufacturerV-Twin OriginUSA

Includes 16-7/8" extra long rod, nuts and spacers.For use with 1.060" diameter seat posts. Fits:UL 1937-1948EL 1936-1940FL 1941-1980Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Seat post kit includes 15-7/8" rod and mounting hardware. Fits:UL 1937-1948EL 1936-1940FL 1941-1980Additional Information UOM1 - KIT MeasurementsAdditional InformationLock Nut Base O.D: .849"Lock Nut Neck O.D.: .484" ManufacturerV-Twin ...

Replica chrome brake hand lever Fits:FL 1941-1964Additional Information OEM No.45017-60R UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages722

Replica polished brake hand lever only Fits:FL 1941-1964Additional Information OEM No.45017-41 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages793

Zinc riser post for spring fork front ends has a 1" inner diameter.Riser post will allow straight riser sets to be used on any 1" bar glide riser or dog bone triple tree for spring forks. Must order hardware separately. Fits:EL 1936-1948FL...

Riser bushing set include 4 bushings. Fits: FL 1960-1972 Additional Information OEM No. 45732-60 UOM 4 - SET Manufacturer V-Twin Origin Imported 2025 Catalog Pages 610

Alloy clutch lever with a 7/16" hole. Fits:XL 1957-1970Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Chrome hand lever assembly is for clutch and brake use. Lever has a smaller hole for cable.For a most accurate reproduction, replace pivot screw with cadmium lever pivot screw. The hole size is 0.296" and the cable hole is 0.14". Fits:FL 1949-1964...

Polished hand lever assembly is for clutch and brake use. Lever has a smaller hole for cable.For a most accurate reproduction, replace pivot screw with cadmium lever pivot screw. The hole size is 0.296" and the cable hole is 0.14". Fits:FL 1949-1964...

Replica left hand Lever assembly includes a slotted lever as original with a small hole for the brake or clutch.For a most accurate reproduction, replace pivot screw with cadmium lever pivot screw. The hole size is 0.25" and the cable hole is 0.10"...

Hand lever assembly accepts a 5/16" O.D. cable and can be used for brake or clutch use. Features a polished finish.Alloy construction exact as original restoration quality! For a most accurate reproduction, replace pivot screw with cadmium lever pivot...

Front hand brake cable lever has a ratchet lock for use as a parking brake.Includes OEM# 45020-51 hand lever bracket, 45049-51 lock pawl plate, 8585 rivet, 512 cotter pin, 45040-51 lock pawl ring, 45045-51 lock pawl, 6543 lever washer, 45047-51 lock pawl...

Strap clamp is parkerized. Includes pin, screws, cotter pin, and washer. Hardware is cadmium plated. Fits:G 1936-1964W 1926-1964FL 1941-1964EL 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages793

Handlebar lever mount has 5/16" countersunk hole to accept cable housing and features an alloy construction and finish.Lever, pin, hardware, and strap not included. Fits:W 1941-1952FL 1941-1964EL 1941-1952G 1941-1971Additional Information OEM No...

Hand lever assembly is for brake or hand clutch use and features a burnished finish.Accepts cable with 5/16" housing. Fits:FL 1941-1964Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages1038

Replica parkerized hand lever assembly is cast investment steel as the original military version of the handle. Correct on 1941-46 models.Handle has original casting numbers! Exact for Restoration. V-Twin exclusive. ...

Polished stainless steel hand lever with a ball end. Fits:FL 1944-1969Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages793

XL clutch lever assembly features a polished finish. Assembly accepts clutch cable adjuster and knurled cable adjuster. Fits:XL 1957-1964Additional Information OEM No.38604-53 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages880