Black dual cable assembly with nylon tube and adjuster installed. Fits:XL 1981-1996FXE 1981-1996Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Black single cable assembly with nylon tube and adjuster installed. Fits:FXE 1981-1996FX 1981-1996Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

OKO Keihin carburetor kit with single throttle operation is for Ironhead models. Original butterfly type with choke and accelerator pump as original, with OEM type manifold and clamps. Flat seals included.Kit includes washers, clamp set, manifold, air...

Zinc finish 2 bolt manifold features 2 holes vertical for 2 bolt linkert or Mikuni-OKO with adapter.*NOTE: Will replace the early 3 bolt brass linkert carburetor manifold. Fits:G 1937-1973W 1937-1952Additional Information UOM1 - EA ManufacturerV-Twin ...

XL Keihin carburetor kit. Fits:XL 1957-1977Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Tillotson idle mixture screw features an adjustable knob and features a zinc finish. Fits:FL 1966-1970Additional Information OEM No.27688-66 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages716

Linkert DC carburetor kit.Includes bowl screws, bowl gasket, body gasket, bowl nut gasket, intake manifold gasket, drain screw, throttle shaft, throttle shaft screws, throttle shaft spring, needle and seat assembly, needle and seat gasket, throttle arm...

Throttle housing features a chrome finish and is for use with 1981-1995 dual cables. Fits:FL 1981-1995Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

OKO polished 3/8" NPT hex body petcock with downward facing 5/16 fuel spigot.Does not include 22mm nut. Includes stainless steel screen. Fits:FL 1966-1974XL 1955-1974Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

Polished OKO hex petcock includes 22mm hex nut for installation.Includes stainless steel screen. *NOTE: Spigot faces under the body for 5/16" fuel outlet. Fits:FL 1975-1985XL 1975-1985FX 1975-1985Additional Information UOM1 - EA ManufacturerV-Twin ...

Handlebar throttle screw kit includes plastic knob, spring and retaining ring. Fits:XL 1974-2020FL 1974-1984FX 1974-1984FXST 1984-2015FXD 1991-1997FLST 1984-2015FX 1984-1994FLT 1986-2007Additional Information OEM No.11155 UOM1 - KIT ManufacturerV-Twin...

Accelerator pump housing features a diaphragm body with a ball and passage. Fits:XL 1976-1978 early 1978 modelsFL 1976-1978 early 1978 modelsFLST 1976-1978 early 1978 modelsFXST 1976-1978 early 1978 modelsAdditional Information OEM No.27364-76 UOM1 -...

Alloy peformance 1-7/8" shorty carburetor kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response.This is the R-2 version of the OKO type replacement carburetor. OKO shorty...

Heavy duty Keihin carburetor diaphragm pump.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FL 1985-1989FX 1976-1984FXR 1982-1989Additional Information OEM No.27361-76 UOM5 - PK ManufacturerV-Twin OriginImported 2025 Catalog Pages979

Linkert needle and seat set features a brass machined body, the needle is stainless steel and includes the gas vent. For the late die cast aluminum linkerts.Accepts a 5/16" inner diameter rubber hose for connection as a gas line. Fits:FL 1966-1966XL...

Flathead zicad plated intake manifold kit has brass packing rings and parkerized nuts.*NOTE:: Zicad is a dull shade of zinc similar to cadmium. Fits:G 1937-1973W 1937-1952Additional Information OEM No.27011-36 UOM1 - KIT ManufacturerV-Twin ...

45" intake manifold kit includes a parkerized 3-bolt manifold and zicad nuts with brass seals.*NOTE: Zicad is a dull shade of zinc similar to cadmium. Fits:G 1937-1973W 1936-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025...

Black intake manifold clamp set includes flat style seals and fillister screws. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages718

Black intake manifold clamp set includes o-ring style seals and fillister screws. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional Information OEM No.27063-57 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages718

40mm XL carburetor kit. Fits:XL 1971-1985Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

Single handlebar throttle cable assembly with black grips.Includes 2 chrome end plugs for grips. Fits:FL 1974-1980FX 1974-1980XL 1974-1980Additional Information UOM1 - KIT MeasurementsAdditional InformationCasing Length: 33" ManufacturerV-Twin ...

Kit includes 38mm OKO flatslide carburetor with built in choke activator, spigot intake manifold, throttle cable, two bolt flange adapter and twist grip set.Kit includes seal adapters for use with the flat band type seals, which are provided. Carburetor...

Chrome hex petcock is rear facing and is constructed of forged brass with screen. Includes a 22mm nut for attaching male fitting on fuel tank.Designs are made for a seated position on the motorcycle with the hose outlet facing a direction to ease fuel...

Chrome hex petcock is down facing and is constructed of forged brass with screen. Features 3/8" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on the motorcycle with the hose outlet facing a direction to ease fuel...

Chrome notch petcock with angle fitting and knob, features a 360  swivel high capacity elbow and includes a straight fitting, full reserve and lever control for on/off and reserve.Petcock features an adjustable fuel outlet and accepts a 5/16" fuel line...

Intake manifold clamp set is a two piece set with nut style clamps. Unique design will give the vintage "plumber" manifold look for later Panhead and Shovelhead models.Set includes screws, o-ring and seal used to tighten for a complete lock. Sold as a...

Black hex petcock is forward facing and is constructed of forged brass with screen. Features 5/16" National Pipe Thread brass hose spigot. On/Off handle is black.For early style 5/16" NPT petcocks on Pre-1975 styles. Fits:FX 1971-1974XL 1955-1974FL...

Chrome hex petcock is down facing and is constructed of forged brass with screen. Features 3/16" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on the motorcycle with the hose outlet facing a direction to ease fuel...

Chrome hex petcock has inward facing outlet and is constructed of forged brass with screen. Features 5/16" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on the motorcycle with the hose outlet facing a direction to...

Sifton chrome petcock rear facing with 3/8" National Pipe Thread. Features solid brass construction with on/off and reserve positions, screen, and a 3/8" fitting. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information UOM1 - EA ...

Sifton chrome petcock forward facing with 3/8" outlet with nut.Petcock features solid brass construction with on and off and reserve positions and screen. Designs are made for a seated position on the motorcycle with the hose outlet facing a direction to...

Black petcock with right outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog...

Linkert carburetor bowl lock nut has a chrome finish. The nuts are 3/4 X 20 thread. Fits:FL 1941-1984Additional Information OEM No.27375-29 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages708

Black Petcock with straight outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025...

Replica zinc intake manifold clamp set features fillister head screws. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information OEM No.27063-57B UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages718

Replica cadmium intake manifold clamp set features fillister head screws. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional Information OEM No.27063-57 UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages718 Replacement Items14-0519 -...

Intake manifold clamp update kit is used to update early intakes to late style seals or when intake flanges are damaged on early heads. Kit includes manifold rings, silicone seals, and stainless steel clamps.Allows use of flat bands and intake clamp...

Intake manifold adapter ring set is used to update early style O-ring intake manifolds and cylinder heads to late style flat band type seals. Set includes four standard and two stroker rings. Fits:FX 1971-1977XL 1957-1977FL 1966-1977Additional...

Stainless steel intake manifold clamp set includes flat type seals and fillister screws.*NOTE: May require thicker manifold seal. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025...

Stainlees steel power intake clamp set features a "floating bridge." Clamps close the gap under the "T" bolt for total 360  wrap around seal. This set has O-ring seals*NOTE: Includes USA made clamps. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional...