Bottom engine mount replaces the stock engine mount on rubber mounted engines. The mount plate is chrome steel with a polyurethane bushing assembly.Urethane motor mount utilizes formulated compounds that enhance compression and rebound dampening...

Universal front solo seat mount includes mount and tilt up seat bracket for solo seats. Lower bracket is direct bolt onto FLH frames.The spacing between the hinge lugs measure 1-5/8". The stud thread size measures 3/8-24. Fits:FLH 1965-1984FX...

Black one piece design with hardware stock style updated bracket includes nuts welded to bracket to accept cover mount screws and washers which mounts to the existing studs.Order mount studs separately. Fits:FL 1978-1983FX 1978-1983Additional Information...

Chrome front engine mount assembly includes bracket, link, and ISO mount with hardware. Fits:FXR 1982-1994FLT 1979-2007Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages105 Replacement Items31-0155 - Chrome ISO...

Replica cadmium seat post and T kit includes fully assembled heavy duty cadmium plated post with a forged steel seat T, and related hardware.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which...

Replica black seat post and T kit includes fully assembled post and forged steel seat T with related hardware.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping...

Replica chrome seat post and T kit includes fully assembled post and forged steel T and related hardware.Stock seat T will work for mounting buddy seats with the use of #31-0177 Front Nose Bracket. ...

Police type solo seat mount kit includes nose bracket, 2" hair pin springs and rear mount. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages1244 Replacement Items13-0273 - Chrome 2"...

Regulator rectifier mount is for a 12 volt Bosch generator and has a chrome finish. Fits:XL 1958-1978FL 1958-1969Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages691

Police type solo seat mount kit includes nose bracket, 2" chrome coil springs and rear mount. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages1244 Replacement Items31-0174 - Front Solo...

Chrome 3 piece exhaust mount clamp kit includes two clamps and a bracket. Fits:FXR 1982-1994FXD 1991-1996Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages230

Ignition coil strap has a black finish. Fits:FX 1971-1977FL 1965-1977Additional Information OEM No.31727-65 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages672

Stainless steel alternator plug retainer bracket bolts to the front left engine mount bolt, and secures the plug from coming out. Fits:FXR 1982-1988FL 1970-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST 1986-1988Additional Information UOM1 - EA ...

Chrome Horn mount bracket. Fits:FLH 1968-1984FL 1968-1984Additional Information OEM No.69131-68 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages1167

Replica chrome seat tee includes 2 stage front bushing and 3/8" bolt.NOTE: 2-stage steel bushings are removable and can be interchanged or replaced as necessary. Fits:FL 1965-1980G 1965-1972Additional Information UOM1 - EA ManufacturerV-Twin ...

Solo seat T will mount police and buddy seats to all big twins with seat posts. Fabricated from square solid steel and features a black finish. Does not include bushing.Front spool has 3/8" hole for mounting, there is no grease fitting or bushing. The...

V-Twin - Chrome Replica Seat Handrail fits '49-'52 WL, '49-'73 FL Models (OEM #91575-49) Replica chrome handrail is for buddy seats and police solos. Handrail is a direct mount on buddy seats. It is a custom application for police style solo seats...

Chrome seat spring support bar Fits:XL 1957-1978Additional Information UOM1 - EA MeasurementsAdditional InformationCenter To Center: 9" ManufacturerV-Twin OriginImported StyleStock 2025 Catalog Pages1008

Zinc plated magneto control arm is for Fairbanks Morse and most aftermarket units. Fits:XLCH 1965-1969Additional Information OEM No.29607-65 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages1303

Front motor mount frame spacer will allow installation of a Knucklehead or Flathead engine in a 1948-1984 frame.The mount holes measure 3-1/4" center-to-center. *NOTE: The spacer is 5/16" thick to make up the difference in...

Zinc plated carburetor support bracket mounts to air cleaner backing plate.Mounts to mount stud at tappet base. Fits:XL 1957-1985Additional Information OEM No.27433-57 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages974

Chrome windshield right and left mount bracketsSold in a quantity of 2. Fits:FLHT 1983-1992FLT 1987-1992Additional Information OEM No.58069-93 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages22

Swingarm bushing assembly rear is manufactured to meet or exceed OEM specifications.Set of two. The units are assembled and includes steel bushings and rubber bushings only, tolerance ring sold separately. Fits:FXR 1982-1994FLT 1980-2001Additional...

Zinc carburetor cable bracket Fits:XL 1966-1971Additional Information OEM No.27449-66 UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages983

Zinc carburetor cable bracket. Fits:XL 1972-1973Additional Information OEM No.27449-72 UOM1 - EA ManufacturerV-Twin OriginUSA

Rear swingarm tolerance bushing ring helps in the stabilizing of your motorcycle. Ring is manufactured to meet or exceed OEM specifications for long lasting durability and performance.Sold in a quantity of 2. Fits:FLT 1980-2001FXR 1983-1994Additional...

Swingarm rubber mount bushing Fits:FLT 1980-2001FXR 1983-1994Additional Information OEM No.47564-86B UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages106 Tech NoteSuggested to use with #51-0992 pivot mount end caps.

Rear swingarm mount bushing. Fits:FLT 1982-1984FLT 1985-1986Additional Information OEM No.47564-82 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages106

Chrome saddlebag supports are designed to fit the contour of the fender struts and protect your bags from the brake caliper and swingarm.Sold in a quantity of 2. Fits:XL 1979-1981Additional Information UOM1 - SET ManufacturerV-Twin OriginImported ...

Solo seat hardware mount kit includes nose brackets, 2" high springs and rear brackets.Use this kit to mount smaller solos such as K or CH types. "P" clamps are not included in this kit. To mount police type, a cross strap is recommended to be ordered...

Ignition coil strap has a chrome finish. Fits:FX 1971-1977FL 1965-1977Additional Information OEM No.31727-72 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages672

Replica black seat T includes 2 stage front bushing and 3/8" bolt.NOTE: 2-stage steel bushings are removable and can be interchanged or replaced as necessary. Fits:FL 1965-1980G 1965-1972Additional Information OEM No.51900-30 UOM1 - KIT ...

Billet top motor mount with holes features a chrome finish.The two holes are drilled and tapped 5/16-18UNC with a center distance of 2 Fits:FX 1979-1984FLST 1986-2005FL 1979-1984FXST 1984-2005Additional Information UOM1 - EA ManufacturerV-Twin ...

Zinc dash mount cross bracket features center hole for mounting. Bracket allows mounting of dash kits with GPS speedometer and tachometer to 1973-1984 FXE models.*NOTE: Accepts dash mount kit to allow the use of FXD dash panel. For use with 1973-1984...

Zinc plated steel top motor mount features choke tab. Fits:FX 1971-1972FL 1977-1984Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages483

Stanchion only is black for Big Twin models.These are only the stanchions from our turn signal mounting kit used for mounting the turn signals below the spotlamp unit. These do no include clamps. Sold in a quantity of 2. Fits:FL 1968-1984Additional...

Seat mount kit. Fits:XL 1982-2003Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages1010

Trumpet horn mount bracket for Shovelhead models. Fits:FL 1966-1984 ShovelheadAdditional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages1172

Pipe clamps for crossover exhaustsSold in a quantity of 2. Fits:XL 1975-1980Additional Information OEM No.65412-75 UOM1 - SET ManufacturerV-Twin OriginUSA 2025 Catalog Pages942

Limiter kit dampens extreme movement on front motor mount cushion. Fits:FXR 1982-1994FLT 1979-2008Additional Information UOM1 - KIT ManufacturerV-Twin OriginUSA 2025 Catalog Pages105