19" x 2.50" Replica single or dual disc front wheel features a chrome hub with bearings installed, chrome spokes, and a chrome drop center rim.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation. ...

Wheel features 16" X 3.00" chrome rim, chrome hub with internals, and 40 chrome spokes, assembled.Includes snap ring. **NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation. Fits:FXST 1984-1985FXE...

This rear wheel assembly starts with a 40 hole 16" x 3" chrome rim, 40 chrome spokes and a rear hub with bearings installed.Wheel is laced and trued. Accepts a 130-140 tire size. **NOTE: All spokes on wheel need to be inspected and...

Replica 19" X 2.50" single disc front clover style wheel feature a chrome drop center hub with internal bearings installed, 40 chrome spokes and chrome rim.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original...

Replica 21" X 1.85" single disc front clover type wheel features a chrome hub with internal bearings installed, 40 chrome spokes and chrome rim.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation. ...

Replica 19" X 2.50" single disc front wheel feature a chrome drop center hub with internal bearings installed, 40 chrome spokes and a chrome rim.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation. ...

Replica 19" X 2.50" dual disc front wheel feature a chrome drop center hub with internal bearings installed, 40 chrome spokes and chrome rim.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation. ...

Replica 21" X 2.15" dual disc front wheel feature a chrome hub with internal bearings installed, 40 chrome spokes, and a chrome rim**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation. ...

19" x 3.00" front wheel with stainless steel spokes, chrome rim and chrome hub. Fits:XL 2005-2007Additional Information UOM1 - EA LocationFront ManufacturerV-Twin OriginImported 2025 Catalog Pages1007

Description 19" WR/KR/XR rear wheel features a natural finish hub with 9/16" ball bearings and internals installed. Laced with 6-8 gauge stainless steel spokes to a black finish 19" x 3.0" 40 hole drop center rim. Accepts a 9/16" axle shaft.Sold laced...

H-C type 2.15" x 19" alloy rim features a polished natural finish and has 40 spoke holes.Exact as original! Rim is drilled to fit Harley type applications on smaller diameter hubs. CV hole measures 8.5mm. Holes may have to be enlarged for certain spoke...

H-C type 2.15 x 18" alloy wheel rim features a polished natural finish and has 40 spoke holes.Exact as original! Outside measurement flange to flange is 2-7/8", inside diameter at bead pattern area is 2". Rim is drilled to fit Harley type applications on...

Rear 16" x 3.5" Duro 36 Fat Spoke wheel features a matte black finish and 25mm bearings without flanges.Wheel hub includes installed 25mm sealed bearings and has 7/16-14 pulley mount threaded hole and a 3/8-16 brake disc mount threaded hole. Wheel...

200 XL rigid frame features a 40  rake with a 3" stretch in front legs to accept a 1-1/8" belt with 200 series tire.Frame has kickstand tab and battery box mount welded in place. Accepts a right side drive transmission and is disc brake type. For use on...

200 XL rigid frame features a 40  rake with a 3" stretch. Frame can be set up for 1957-1985 type Ironhead motors.Frame will accept 1" neck cups, Wide Glide fork assembly, stock length kickstand and pin, oil tank and battery box which must be ordered...

Black 13" tall sissy bar is constructed of round solid stock stock featuring the original poor boy style. One piece welded design. Fits:XL 1996-2003Additional Information UOM1 - EA ManufacturerV-Twin OriginImported StyleRound

Chrome 13" tall sissy bar is constructed of round solid stock featuring the original poor boy style. One piece welded design. Fits:XL 1996-2003Additional Information UOM1 - EA ManufacturerV-Twin OriginImported StyleRound

Black 13" tall sissy bar is constructed of round solid stock stock featuring the original poor boy style. One piece welded design. Fits:XL 2004-2020Additional Information UOM1 - EA ManufacturerV-Twin OriginImported StyleRound

Chrome 13" tall sissy bar is constructed of round solid stock featuring the original poor boy style. One piece welded design. Fits:XL 2004-2020Additional Information UOM1 - EA ManufacturerV-Twin OriginImported StyleRound

Footpeg support bar set is the splined type featuring a raw steel construction.Attaches to early Sportster frames to mount footpeg stanchions. One end is splined and the other fits over the frame tube. ...

Raw steel weld-on hardtail features a raw steel finish.Replaces entire rear section of the frame, for the full rigid look. *NOTE: Must be installed by a certified welder. Fits:XL 1957-1978Additional Information UOM1 - EA ManufacturerV-Twin ...

Weld on hardtail with weld on bracket for stock frames with 2000-UP disc brake.The adjuster block are on the outside of the rear axle plate and are threaded to accept the axle adjuster kit. This hardtail accepts 3/4" axle. Top seat plate is included but...

Frame hardtail is weld on type and includes weld on frame plate. Accepts drum type brake.Hardtail should be aligned for chain clearance prior to final welding. This hardtail fits hardtail rigid frames. The distance between the inside to inside of the...

Frame hardtail is bolt on type. Accepts drum style brakes on a rigid frame.Unit should be aligned for chain clearance prior to final bolting. DIY hardtail is easy to install as the alignment is accomplished in the mount design. The distance between the...

Frame hardtail replaces shocks on swingarm frames and is drum brake type. Unit should be aligned for chain clearance prior to final welding.DIY hardtailing is easy to install as the alignment is accomplished in the mount design provided. The distance...

Engine bar features 1-1/4" tubing and foot rests with rubber pads. Hardware is not included. This will not work with forward controls.**WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances...

XL brake cross shaft kit includes two bushings. Kit must be welded in place. Fits:XL 1952-1976Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages895

D+D XL raw rigid frame features a 1-1/4" thick wall, DOM steel tubing with 1-1/2" backbones, 30  rake and 0  stretch. This rigid frame is a basic starter frame.Frame will require custom 3/4" rear axle and mid control mounts. Suggested to use with oil...

This raw steel full rear section hardtail for Sportsters includes the rear motor mount and 4 bolt plate mount with upper and lower tube set. Frame is used to replace the stock rear motor mount and seat tube.The rear motor mount 4-bolt plate is welded in...

Frame mount tab set for solo seats have weld on mount tabs. Use with T bar and pivot bolt to mount K and CH solos. Fits:XL 1957-1979Additional Information UOM1 - SET ManufacturerV-Twin OriginUSA StyleStock 2025 Catalog Pages822 Tech NoteSuggested...

Neck frame casting fits XL models to be welded in place on 30  stock or custom frames. Has unmachined padlock boss. Accepts neck cup kit.Neck frame accepts stock bearing cups and trees. Fits:XL 1972-1978Additional Information UOM1 - EA ...

XL control mount set features a black finish. Control mounts for right (2 bolt plate) and left (3 bolt plate) to accept Big Twin forward controls.Set is used to mount 1941-1999 Big Twin forward mount shifter, brake or clutch pedal kits. Additional...

Kit mounts to adapt 1957-1985 Ironhead motors into 1986-2003 XL rigid frames.Ironhead motor installation kit includes front and rear mounts and hardware. Fits:XL 1957-2003Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

XL rear motor mount pad is the tall type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

XL rear motor mount pad is the short type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

XL raw brake shaft tube for mechanical brakes. Kit includes machined 7.25" tube with brass bushing and shifter cross bushing set installed. Must be welded in place to frame.*NOTE: Locate tube using cross shaft and pedal location in place to get proper...

Rear motor mount plate features a raw steel finish and is for use on custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #51-0060 XL Single Loop Rigid Bobber Frame Raw.

Rear motor mount frame plate features a raw steel finish and is for use on hardtails and custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #51-0060 XL Single Loop Rigid...

XL rigid frame neck is for the XL single loop rigid bobber frames. Fits:XL 1986-2003Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeRigid Tech NoteSuggested to use with #51-0060 XL Single Loop Rigid Bobber Frame Raw.

Rear motor mount casting features an investment cast construction and is for rigid frames. Fits:XL 1982-2003Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #51-0060 XL Single Loop Rigid Bobber Frame...