Joker Machine - 02-98JFB - Points Cover - Finned Joker Racing - 2 Hole - Black AnodizedFeaturesInclude mounting screwsChrome-plated or anodized billet aluminum finishMade in the USASpecsProduct NameCoverUnitsEachColor/FinishAnodizedMaterialBillet...

Feuling Parts - 1217 - Valve Spring Seat Shims - Twin Cam | XLFeaturesSet valve spring open height to match camshaft lifts for optimum valve-train stability and performanceIncludes four 0.060" thick shims, and four 0.015" thick shims with 1.500" OD...

Feuling Parts - 4057 - Solid Lifters - Race Series® - +0.8435" to 0.844" Oversize - Twin Cam | XL | Buell | M8FeaturesDesigned for engines with radical valve spring pressures and large lift camshaftOptimize valvetrain stability at high rpm, decrease...

Feuling Parts - 4056 - Solid Lifters - Race Series® - +0.843" to 0.8435" Oversize - Twin Cam | XL | Buell | M8FeaturesDesigned for engines with radical valve spring pressures and large lift camshaftOptimize valvetrain stability at high rpm, decrease...

Feuling Parts - 4018ST - Lifters - Race Series® - Oversized - M8FeaturesNew revolutionary design with 0.115" of total travel vs. a full travel lifter with 0.200"Increases RPM by decreasing valve float and valve-train harmonics while maintaining a quiet...

Feuling Parts - 4017ST - Lifters - Race Series®  - Short Travel - M8 Features New revolutionary design with 0.115" of total travel vs. a full travel lifter with 0.200" Increases RPM by decreasing valve float and valve-train harmonics while...

Feuling Parts - 4018 - Lifters - Race Series® - Oversize - M8FeaturesFull-travel hydraulic lifters made from machined steel designed with .200" of travelExceed the needs of large-lift camshafts and higher spring pressures with a slower bleed-down...

Feuling Parts - 4017 - Lifters - Race Series® - Standard - M8FeaturesFull-travel hydraulic lifters made from machined steel designed with .200" of travelExceed the needs of large-lift camshafts and higher spring pressures with a slower bleed-down...

Jims - 1827 - Powerglide Tappet - Standard - Twin CamFeaturesThe same Powerglide advantage (oil-fed axle, billet steel body, precision fit hydraulics), but now incorporates a Steady Roll bronze bushing in place of the needle bearing rollerThese tappets...

Jims - 1824 - Powerglide Tappet - EvolutionFeaturesThe same Powerglide advantage (oil-fed axle, billet steel body, precision fit hydraulics), but now incorporates a Steady Roll bronze bushing in place of the needle bearing rollerThese tappets have...

Jims - 1825 - Powerglide Tappet - .002 - EvolutionFeaturesThe same Powerglide advantage (oil-fed axle, billet steel body, precision fit hydraulics), but now incorporates a Steady Roll bronze bushing in place of the needle bearing rollerThese tappets have...

Jims - 1820 - Hydrosolid Tappet - Twin CamFeaturesPerform like a hydraulic tappet up to 5500 rpm, then turn into a solid tappetWhen they turn into solid tappets, it adds approximately three to six more usable horsepowerPrevent hydraulic pump at high...

Feuling Parts - 4055 - Race Series® Solid Lifters - Twin Cam | M8 | XL/XR 1200FeaturesDesigned for engines with radical valve spring pressures and large lift camshafts; maintain proper and critical oil flow to top end with metered oilingUtilize standard...

Jims - 1810 - Powerglide II Tappet - .005 - Twin CamFeaturesThese tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacitiesBillet bodyIncreased roller widthRoller perpendicularity held to .0002"Hand-honed...

Feuling Parts - 4061 - Lifters - HP+® - EvolutionFeaturesPerformance hydraulic roller lifters dyno developed and track testedCNC-machined and precision groundWhen used with Feuling® oil pump, they will increase critical oil flow to valves, springs,...

Feuling Parts - 4062 - Lifters - Race Series® - Standard - EvolutionFeaturesFull-travel hydraulic lifters made from machined steel designed with .200" of travelExceed the needs of large-lift camshafts and higher spring pressures with a slower bleed-down...

Feuling Parts - 4025 - Lifters - HP+® - XLFeaturesPerformance hydraulic roller lifters dyno developed and track testedCNC-machined and precision groundWhen used with Feuling® oil pump, they will increase critical oil flow to valves, springs, rockers,...

Jims - 1807 - Hydraulic Tappet - Twin CamFeaturesThese tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacitiesBillet bodyIncreased roller widthRoller perpendicularity held to .0002"Hand-honed hydraulic...

Feuling Parts - 4052 - Lifters - Race Series® - Oversize - Twin CamFeaturesFull-travel hydraulic lifters made from machined steel designed with .200" of travelExceed the needs of large-lift camshafts and higher spring pressures with a slower bleed-down...

Feuling Parts - 4000 - Tappet Set - Twin Cam/M8FeaturesPerformance hydraulic roller lifters dyno developed and track testedCNC-machined and precision groundWhen used with Feuling® oil pump, they will increase critical oil flow to valves, springs,...

Feuling Parts - 4085 - HP+® Pushrods - XLFeaturesMaintain maximum valve lift in your Harley Davidson® XL engineIncreased stiffness and column rigidity maximizing valve-train stability, increasing engine RPM horsepower and torque output3/8" 4130 chrome...

Feuling Parts - 1212 - Valve Locks - Standard Replacement - Twin CamFeaturesRaises valve spring retainer to gain 0.050" installed height without maching the cylinder head spring setMade in the USAFeuling Racing & DevelopmentReplacement Part for OEM...

Feuling Parts - 1123 - Valve Spring Kit - Econo Beehive with TI Retainers - Twin CamFeaturesMade from premium stress-relieved conical ovate wireFeatures extremely high-level of fatigue lifeUses a much smaller and lighter weight retainer to reduce valve...

Feuling Parts - 1121 - Valve Spring Kit - Econo Beehive with Steel Retainers - Twin CamFeaturesMade from premium stress-relieved conical ovate wireFeatures extremely high-level of fatigue lifeUses a much smaller and lighter weight retainer to reduce...

Feuling Parts - 1120 - Valve Spring Kit - Econo Beehive with Steel Retainers - EVO | Twin CamFeaturesMade from premium stress-relieved conical ovate wireFeatures extremely high-level of fatigue lifeUses a much smaller and lighter weight retainer to...

Feuling Parts - 1206 - Valve Locks - Offset 0.050" - Twin CamFeaturesRaises valve spring retainer to gain 0.050" installed height without maching the cylinder head spring setMade in the USAFeuling Racing & DevelopmentSpecsMaterialSteelStem Diameter...

Feuling Parts - 1213 - Valve Locks - 7.00 mm Triple Groove - Twin CamFeaturesRaises valve spring retainer to gain 0.050" installed height without maching the cylinder head spring setMade in the USAFeuling Racing & DevelopmentReplacement Part for OEM...

Feuling Parts - 1076 - Valve Guide Seals - For 7.00 mm Valve Stem - 88"/96"/103" Twin Cam | XLFeaturesHigh-quality Viton® valve guide sealsDesigned to handle high engine temperatures with a built-in spring-loaded wiper to clean excess oil from valve stem...

Feuling Parts - 1075 - Valve Guide Seals - For 0.420" Guide - 5/16" Valve Stem - Twin Cam | XLFeaturesHigh-quality Viton® valve guide sealsDesigned to handle high engine temperatures with a built-in spring-loaded wiper to clean excess oil from valve stem...

Feuling Parts - 1105 - Beehive Valve SpringsFeaturesMachined from premium-grade hi-tensile chrome silicon single-conical ovate wireShot-peened with specially processed thermal heat treat and super NexTex® finish for fatigue life needed to exceed high...

Feuling Parts - 1205 - Valve Spring Kit - High Load Beehive® with TI Retainers - Twin Cam | XL | XRFeaturesMade from premium stress-relieved conical ovate wire with nitrided surface heat treatment, shot-peened surface enhancements and Nano Peen™...

Feuling Parts - 1200 - Valve Spring Kit - High Load Beehive® with TI Retainers - Evo/Twin Cam | XL | BuellFeaturesMade from premium stress-relieved conical ovate wire with nitrided surface heat treatment, shot-peened surface enhancements and Nano Peen™...

Feuling Parts - 1100 - Beehive Valve SpringsFeaturesMachined from premium-grade hi-tensile chrome silicon single-conical ovate wireShot-peened with specially processed thermal heat treat and super NexTex® finish for fatigue life needed to exceed high...

Feuling Parts - 1377 - Camshafts - 580 SeriesFeaturesDesigned for riders who want more horsepower and the powerband higher in the RPM rangeRequires high-lift valve springs (Fueling Beehive Endurance or High Load valve springs recommended)Higher...

Feuling Parts - 1370 - Camshafts - 505/515 XLFeaturesProduce a wide powerband in stock enginesSplit lift camshaft produces a solid powerband with top fuel soundCan be used with stock pushrods and valve springsFueling recommends new camshafts with new...

Feuling Parts - 2073 - Inner Cam Bearing - XLFeaturesBearings are heavy-duty full-complement style designed to accept the higher loads and demands of performance enginesManufactured by Koyo® Torrington®Made in the USAFeuling Racing &...

Feuling Parts - 8061 - Outer Roller Chain - 22 Link - M8 | Twin CamFeaturesStock replacement chainsFeuling Racing & DevelopmentReplacement Part for OEM Number(s): 2567506SpecsNumber of Links22Riding StyleStreetUnitsEachMounting PositionOuterProduct...

Hastings - 2M5069 - Piston Rings - 3.000" Standard - 883 XL EvolutionFeaturesIncludes top compression rings, second compression rings, and oil control ringsTop Compression Rings are Barrel FaceHelps in the the heat transfer process between the piston and...

Jagg Oil Coolers - 751-FP2600-0323 - Fan-Assisted Oil Cooler Kit - VerticalFeaturesDesigned to perform as well at low speeds and stop-and-go traffic as on the open highwayIncludes cooler, sealed-motor fan, oil hose, mounting hardware, automatic thermal...

Jagg Oil Coolers - 750-2000-0323 - Oil Cooler Kit - Vertical - WideLineFeaturesSpecially designed turbulators in each oil passageway gently stir oil, exposing it to more critical heat dissipation surface area for superior cooling with minimal oil...