Jims - 1041-TC Camshaft Cover Holder Tool fits '70-'99 Big Twin Models (Except Twin Cam) Features: Holds cam cover flat and helps prevent damage/scratches when removing and installing bushings Clamps in vice or Bridgeport™ mill Made in the U...

Jims - 95970-32C Piston Pin Bush Tool fits '36-'99 Big Twin, '57-'20 Sportster & Buell Models (Except 1125R) Features: Use to remove and install wrist pin bushings without removing rods from crankcase Made in the U.S.A...

Jims - 1280 Camshaft Bearing Puller fits '99-'06 Twin Cam (Except '06 Dyna) for Removal of Bearings, 'L00-'06 FXST/FL & 'L00-'05 FXD for Removal of Front Cam Bearing Features: Once the camshafts are removed from the support plate this tool will...

Jims - 1275 Crankshaft Bearing Tool fits '99-'02 Twin Cam “A” Motors Features: Designed to remove and replace the right crankcase bearing Press bearing in and out straight with no damage to the case Made in the U.S.A...

Jims - 74420-94 Electronic Speedometer Sensor fits '99-'03 FLT Model (OEM #74420-94, 74429-97, 74429-97A) Features: Top-quality replacement sensor Also works on any aftermarket transmission case with a speedometer sensor hole Includes O-ring,...

Jims - 955 Gauge for Harley-Davidson Injection Pressure fits '01-'20 Big Twin Models w/ Delphi EFI (Except '18-'20 Softails) Features: Includes all necessary parts to diagnose Delphi fuel injection; a large gauge assembly, 8" hose, 2" hose, fuel tank...

Jims - 954 Pump Ring Tool fits '08-'20 FLHT Model Features: Use for quick and easy service of fuel filter and other fuel-related parts Removes/installs retaining ring holding fuel pump Heavy-duty construction Made in the U.S.A...

Jims - 970 3rd Hand Axle Locker Tool fits '02-'21 FLT/​FLHT Models Features: Eliminates the need for a helper or trying to blindly hold the axle from the other side of the tire Prevents axle from moving while torquing down the axle nut after setting...

Jims - 977 Fork Stem Nut Wrench fits '96-'13 FLHT & '94-'13 FLHR Models Features: This tool allows the ability to loosen, tighten and torque to spec the 1-1/2” stem nut without radio removal Normally to get access to the top stem nut...

Jims - 5822 Swing Arm Bearing Installer fits '02-'21 Touring Models Features: Both drive side and brake side bearings, which are at different depths, can be easily and accurately installed with this tool kit JIMS® took it one step further and...

Jims - 5827 Fork Cap Allen Socket fits '14-'20 Touring Models Features: Harley-Davidson® recently updated the fork cap on touring bikes, and you now need a large Allen head socket for disassembly Works on touring models with 49 mm forks Made in...

Jims - 5515 Neck Bearing Tool fits '14-'20 Touring & H-D FL Trike Models Features: Tool has tapered drivers that ensure the correct installed alignment and depth of steering stem races Eliminates the risk of damaging the races and bearings...

Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames) Features: Removes and installs steering head bearing race on 84-16 Big Twin...

Jims - 96600-36B Valve Spring Compressor Tool fits '36-'04 Big Twin & '57-'03 Sportster Models Features: Comes with new valve collar receiver for safer tool usage, and can be clamped in vice Hardened ball bearing style tip at valve head end...

Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing Made in the U.S.A...

Jims - 1743 Swingarm Bushing Tool fits '80-'01 FLT/​FLHT, '82-'99 FXR & all Aftermarket FXR-Style Frames Features: Allows installation of delicate, silicone cleveblock bushings in swingarm without damage Tool presses on outer sleeve of...

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...

Jims - 1047-TP Crank Assembly Removal Tool fits '55-'06 Big Twin Models (Except '06 Dyna) Features: This tool can only be used for removing the flywheel from the left case Will also press cases apart and break sealant bond Some case pressing will...

Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking dowel pin Made...

Jims - 1030-TS Crank Pin Flywheel Socket fits 'L83-'99 Big Twin Models (OEM #23969-83) Features: Machined for 100% nut-to-socket and drive-end contact Eliminate nut rounding and risk of injury Made in the U.S.A...

Jims - 33071-73 Bearing Race Remover and Installer fits '73-'99 Big Twin, Sportster & Buell Wheels Features: Designed to remove and install bearing cups in cast wheels Use with JIMS® Handle Fitment 1999 Harley-Davidson Super...

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to keep rollers from falling into the crankcase Comes with...

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Jims - 95960-52C Clutch Hub Puller fits '36-'90 Big Twin Models Features: Used to remove wet and dry clutch hubs without removing clutch release rod 4 bolts included for dry clutch removal Made in the U.S.A...

Jims - 1051 Wrist Pin Bushing Tool fits '99-'06 Twin Cam Models Features: Used to remove and install wrist pin bushings without removing connecting rods from crankcases Comes with instructions Made in the U.S.A...

Jims - 1283 Camshaft Chain Tensioner Tool fits '99-'06 Twin Cam Models (Except '06 Dyna) Features: Designed to unload the pressure on the primary and secondary chain tensioners to assemble and disassemble cams Also checks spring loads on chain...

LA Choppers - Pinned Hefty Top Clamp fits '99-'23 Big Twin Models w/ 3-1/2 ” on Center Risers & Offset Mounting Holes Features: Fits Hefty handlebars and risers Polished aluminum construction Pinned to prevent movement of handlebars Made...

Custom Cycle Engineering - 49 mm Ultra Chrome Fork Tubes fits '17-'23 Touring Models (OEM #455003-41) Features: Designed to fit a wide variety of models Made in the U.S.A Lengths given for OEM replacements may not be the exact OEM...

Custom Cycle Engineering - Steering Damper System fits '99-'07 FLHR/​FLHT/​FLHTCU/​FLHX Models Features: This complete steering damper system stabilizes the front fork and helps prevent front-end wobble Custom-designed 1-1/4" clamp and bracket...

Custom Cycle Engineering - Swingarm Retrofit Kit fits '99-'01 FLT/​FLHT/​FLHR Models Features: Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring models No need to alter transmission housing Will require the purchase of a...

Custom Cycle Engineering - Swingarm Retrofit Kit w/ Pivot Shaft fits '99-'01 FLT/​FLHT/​FLHR Models Features: Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring models No need to alter transmission housing Will require the...

Custom Cycle Engineering - Engine Equator II fits '09-'16 Touring Models Features: Allows all Dresser riders to correct chassis misalignment, which is impossible to achieve with the stock motor mount Billet aluminum bracket replaces the forged front...

Custom Cycle Engineering - 41 mm Ultra Chrome Fork Tubes fits '99-'13 Touring (Except H-D FL Trike), '00-'17 Softail (Except FXS/​FXCW/​FXCWC), '00-'05 FXDWG Models (OEM #45890-97, 45930-00) Features: Designed to fit a wide variety of models Made in...

Custom Cycle Engineering - 41 mm Ultra Chrome Fork Tubes fits 'L84-'99 Softail, '85-'86 FXWG, '93-'98 FXDWG, '85-'96 Touring Models (OEM #45827-84, 45417-84) Features: Designed to fit a wide variety of models Made in the U.S.A Lengths given for OEM...

Biltwell - Tyson XL Pullback 14" Handlebars- Chrome/ Slotted These T-style handlebars are a clean look on FXR's, Dynas, Sportsters, and Choppers. Features Manufactured from 1" OD x .120" wall seamless 4130 chromoly tubing All bends are created with...

Uni Filter - Air Filter Element fits '86-'89 80” Evolution Big Twin Models (OEM #29259-86) Features: Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing superior filtration Made in the...

Uni Filter - Air Filter Element fits '84-'85 80” Evolution Big Twin Models (Except FLT, FLHT (OEM #29259-83A)) Features: Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing superior...

Uni Filter - Air Filter Element fits '84-'85 FLT/FLHT Models (OEM #29288-83) Features: Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing superior filtration Made in the...

Uni Filter - Air Filter fits '80-'82 FLT, '82-'83 FXR, 'L78-'82 Sportster 1000, 'L78-'84 FX, FL & FLH Models (OEM #29255-78) Features: Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing...