V-Twin - 50-0183 - Replica Rear Fender SteelDescriptionReplica steel rear fender has tail lamp hole. Fender mounts to stock struts.We suggest pre fitting the fender prior to painting. ...

V-Twin - 50-0182 - Spring Fork Front Fender Skirt SetDescriptionSpring Fork skirt set for front fender includes the left and right side.Must be spot welded in place. Fits:UL 1937-1948EL 1936-1948FL 1941-1948W 1936-1952Additional Information UOM1 - SET ...

V-Twin - 50-0179 - Rigid Rear FenderDescriptionRigid fender features a two piece spot welded skirt and wide braces which is correct for 1936-46 45 Solo but also fits 1936-52 W.Includes wide 29/32" braces riveted in place. Order tail lamp separately...

V-Twin - 50-0178 - Rear Fender Kit BobbedDescriptionKit includes steel fender and chrome tail lamp bracket which includes cateye tail lamp.Order chrome struts and covers separately. We suggest pre fitting the fender prior to painting. ...

V-Twin - 50-0176 - Front Fender Spring ForkDescriptionSmooth front fender with brackets features a raw finish.We suggest pre fitting the fender prior to painting. The mounting holes measure 2-5/8" center to center. The width between mounting brackets is...

V-Twin - 50-0170 - Rear Fender BobbedDescriptionBobbed fender fits stock struts.We suggest pre fitting the fender prior to painting. Order light brackets separately. Before priming or painting, fit the fender body, braces and mounting points in place...

V-Twin - 50-0168 - Rear Fender Skirt SetDescriptionRear fender skirt set for side valve modelsBefore finishing with primer or paint installer must prepare fender by checking alignment of fender tail and bracket. Alignment will have to be adjusted and...

V-Twin - 50-0166 - Rear Fender Flat Bobbed Raw UnfinishedDescriptionUnfinished 6" wide heavy duty rear bobbed flat fender is rolled of 16 gauge steel and is 1-1/4" deep.Fender may require trimming and finishing for chain relief. We suggest pre fitting...

V-Twin - 50-0164 - Front Fender Narrow RawDescriptionNarrow front fender has a raw finish with chrome brackets riveted on. Features a smooth type construction.Fender is for 35mm and 39mm forks with a 19 or 21" wheel. The width of the fender bracket...

V-Twin - 50-0162 - Rear Fender Flat Raw UnfinishedDescriptionUnfinished 6" wide heavy duty rear flat fender is rolled of 16 gauge steel and and is 1-1/4" deep.May require trimming and finishing for chain relief. We suggest pre fitting the fender prior to...

V-Twin - 50-0161 - Chrome Flat Fender 6 inch WideDescription6" wide heavy duty rear flat fender is rolled of 16 gauge steel with a chrome finish. Fender is 1-1/4" deep.Fender may require trimming and finishing for chain relief. We suggest pre fitting the...

V-Twin - 50-0160 - Rear Fender Flat Raw UnfinishedDescriptionUnfinished 5" wide heavy duty rear flat fender is rolled of 16 gauge steel and is 1-1/4" deep.Length of the fender with the curve is 41-7/8" long with the length between the tips of the fender...

V-Twin - 50-0153 - Replica Rear Fender with Tail Lamp HoleDescriptionReplica rear steel fender is equipped with a tail lamp hole and mounts to stock struts.We suggest pre fitting the fender prior to painting. ...

V-Twin - 50-0150 - Rear Fender Bobbed Raw SteelDescriptionBobbed style swingarm rear fender is constructed of steel.Fender is not equipped with a tail lamp hole. We suggest pre fitting the fender prior to painting. Before priming or painting, fit the...

V-Twin - 50-0149 - Rear Fender without Tail Lamp HoleDescriptionRear fender is raw and mounts to stock struts.Fender is not equipped with a tail lamp hole. We suggest pre fitting the fender prior to painting. ...

V-Twin - 50-0148 - Replica Rear Fender SteelDescriptionReplica steel rear fender is equipped with a tail lamp hole and mounts to the struts.Measures 6-3/8" wide with a length of 29". We suggest pre fitting fender prior to painting. ...

V-Twin - 50-0147 - Replica Rear Fender with Tail Lamp HoleDescriptionReplica rear fender is equipped with a tail lamp hole and mounts to stock strutsWe suggest pre fitting the fender prior to painting. ...

V-Twin - 50-0146 - Replica Rear Fender with Tail Lamp HoleDescriptionReplica rear fender is equipped with a tail lamp hole and mounts to stock struts.Fender is equipped with wiring clips which are located under the left side of the fender. We suggest pre...

V-Twin - 50-0145 - Rear Fender with Flare EndDescriptionCustom rear fender is constructed of steel and has flared end. Fender mounts to stock struts.Fender does not have a tail lamp hole. We suggest pre fitting the fender prior to painting. ...

V-Twin - 50-0144 - Spring Fork Front FenderDescriptionSpring fork front fenders are 7-1/4" wide for 16" or 18" wheels with riveted on wide braces.Fender braces fit on the outside of the offset rockers. Fender is not pre-drilled. We suggest pre fitting...

V-Twin - 50-0142 - Rigid Rear Fender AssembledDescriptionRigid rear fender features a cutout for the chain relief as on 1951-57 rigid models.Fender comes with a 7/8" wide bracket and does not have a tail lamp hole. Tail lamp hole may be cut, as required...

V-Twin - 50-0141 - 45 inch WL Rear FenderDescription45" WL rigid rear fender with narrow braces features relief over skirt to accept stainless fender trim attached by clips.Fender is fully assembled and riveted together with hinge. *NOTE: Features 5/8"...

V-Twin - 50-0140 - Replica Front Fender RawDescriptionReplica raw front fender with lamp indent.Brackets are not included. Fender fits 41mm wide style glide forks with 16" wheel. Before priming or painting, fit the fender body, braces and mounting points...

V-Twin - 50-0138 - Replica Front Fender RawDescriptionReplica glide style front fender has a raw finish with holes .We suggest pre fitting the fender prior to painting. ...

V-Twin - 50-0137 - Replica Front Fender Raw with Trim HoleDescriptionReplica wide glide front fender has a raw finish with trim holes.Fenders fit 41mm wide style glide forks with 16" wheel. Fender is equipped with trim holes in the front for fender tip...

V-Twin - 50-0136 - Front Fender Narrow RawDescriptionNarrow type front fender has a raw finish and includes raw brackets that are riveted on. Features a smooth type construction.Fender fits 35mm and 39mm forks with a 19" wheel. We suggest pre fitting the...

V-Twin - 50-0129 - Front Fender Early RawDescriptionEarly front fender has a raw finish with braces riveted on. Replaces stock fender.We suggest pre fitting the fender prior to painting. ...

V-Twin - 50-0127 - Front Fender Narrow RawDescriptionNarrow front fender has a primer finish and includes chrome braces riveted on.For use on 19" or 21" tires only. Fender brace mount measure 3" center to center. Before priming or painting, fit the...

V-Twin - 50-0125 - Front Fender Glide Type RawDescriptionWide glide type steel front fender has a raw finish and includes chrome bracket riveted on.Fender is for use with 19" and 21" tires only. The mounting holes measure 2-3/4" center to center. We...

V-Twin - 50-0124 - Replica Raw Front FenderDescriptionReplica front fender has a raw finish with heavy gauge reinforced brackets riveted on.Brackets are correct for 1958-1984 and will fit 1949-1984. Fender is for 41mm wide style glide fork assembly and...

V-Twin - 50-0123 - Front Fender Narrow ChromeDescriptionNarrow front fender is chrome steel with chrome brackets riveted on. Features a smooth type construction.Fender is for use on 35mm or 39mm forks with a 19" wheel. We suggest pre fitting the fender...

V-Twin - 50-0120 - Replica Front Fender Raw SteelDescriptionReplica front fender comes in a raw steel finish is assembled with right side cable bracket and correct large head rivets.We suggest pre fitting the fender prior to painting. Before priming or...

V-Twin - 50-0117 - Replica Front Fender Raw without BracketsDescriptionReplica front fender has a raw finish with fender trim mount holes and is for a 16" wheel.This fender is smooth type except for the side rivet holes for the stock mount brackets. For...

V-Twin - 50-0114 - Front Fender Raw With BracketDescriptionSpring Fork type fender comes in a raw finish with raw brackets riveted on.For use on 19" and 21" tires only. We suggest pre-fitting all fenders prior to painting. ...

V-Twin - 50-0102 - Tour-Pak Conversion KitDescriptionDetachable Tour-Pak conversion kit feature a chrome finish.Kit includes pieces needed to convert from rigid mount to detachable. Fits:FLHTC 1997-2008Additional Information OEM No.53303-07A UOM1 - KIT...

V-Twin - 50-0101 - Mid Frame Cover Air Deflector Kit BlackDescriptionBlack mid frame cover air deflector kit fits below the driver's seating area to direct engine heat away. Kit includes mounting hardware.Sold in a pair. Fits:FLT 2001-2007 without an...

V-Twin - 50-0100 - FLST Softail Front FenderDescriptionFLST softail front fender. Fits:FLFB 2018-2022FLFBS 2018-2022Additional Information OEM No.58900267 UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 50-0099 - Softail Front FenderDescriptionSoftail front fender. Fits:FLHCS 2018-2023FLHC 2018-2023FLDE 2018-2020Additional Information OEM No.58900203 UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 50-0098 - FXLR Rear FenderDescriptionFXLR rear fender. Fits:FXLRST 2018-2022FXLR 2018-2022FXLRS 2018-2022Additional Information OEM No.59500485A UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages296

V-Twin - 50-0097 - Softail Rear FenderDescriptionSoftail rear fender. Fits:FXST 2020-2023FLSL 2018-2020FXBB 2018-2023Additional Information OEM No.59500454 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages296