Carb & Fuel
4068 parts
Harley-Davidson carb and fuel system components cover the air intake, carburetion, fuel delivery and electronic fuel injection systems used across a wide range of motorcycles. The category includes Harley-Davidson air cleaners, air filters, carburetors, intake manifolds, carburetor rebuild kits, fuel pumps, fuel filters, fuel injectors, fuel lines and EFI components. Products are available for older carbureted Harley-Davidson models as well as later fuel-injected motorcycles, with options for replacement, maintenance, performance upgrades and custom intake setups. Fitment varies by model, engine configuration, carburetor or EFI system and year.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
V-Twin - 35-0495 - Linkert Carburetor Throttle Lever with Arm Zicad Plated - Fits 1948-1965 Harley-Davidson FL
V-Twin Mfg
$50.16Linkert carburetor throttle lever with arm is zicad plated.*NOTE: Zicad is a dull shade of zinc similar to cadmium. Lever features two holes for cable block location. Fits:FL 1948-1965Additional...$50.16 -
V-Twin - 35-0493 - Carburetor Air Intake Shaft Stop - Fits 1941-1965 Harley-Davidson FL
V-Twin Mfg
$22.96Linkert carburetor air intake shaft stop Fits:FL 1941-1965Additional Information OEM No.27219-36 UOM1$22.96 -
V-Twin - 35-0490 - OHV Linkert Carburetor Float Bowl with Alloy Finish - Fits 1941-1965 Harley-Davidson FL, 1936-1952 EL
V-Twin Mfg
$86.74Alloy finish Linkert carburetor float bowl has flat top and provision for drain screw hole.Includes linkert carburetor float pivot pin with caps for float pivot arm. Order pivot arm separately...$86.74 -
V-Twin - 35-0488 - M-5 Linkert Carburetor Choke Shaft - Fits 1936-1947 Harley-Davidson EL, 1941-1947 FL
V-Twin Mfg
MSRP: $40.51$39.70M-5 Carburetor choke shaft can be used on M-5, M-25, M-35 and M-35T models.*NOTE: Requires detent plate for choke operation, V-Twin #35-1001, available separately. Fits:EL 1936-1947FL...MSRP: $40.51$39.70 -
V-Twin - 35-0486 - Parkerized Carburetor Choke Rod - Fits 1941-1947 Harley-Davidson FL
V-Twin Mfg
$26.11Carburetor choke rod has a parkerized finish. Fits:FL 1941-1947Additional Information OEM No.27244-40 UOM$26.11 -
V-Twin - 35-0482 - SV Replica Linkert Carburetor Float Bowl - Fits 1933-1952 Harley-Davidson W, 1933-1965 G, 1937-1948 U, 1930-1936 VL
V-Twin Mfg
MSRP: $73.80$73.56SV replica linkert carburetor float bowl accepts 9/16" - 20 thread plug.Inlcudes 9/16 x 20 hex plug, with washer for bowl extension. Float bowl does have drain screw hole provision. Float bowl cap is...MSRP: $73.80$73.56 -
V-Twin - 35-0481 - Linkert Carburetor Main Nozzle - Fits 1933-1952 Harley-Davidson WL, 1937-1948 UL, 1941-1965 FL, 1936-1940 EL, 1933-1934 VL
V-Twin Mfg
$50.16Linkert carburetor main nozzle.Clearance for this main nozzle may need to be adjusted for exact fit on some bodies. Main nozzle holes must face intake manifold. Fits:WL 1933-1952UL 1937-1948FL...$50.16 -
V-Twin - 35-0478 - Carburetor Main Nozzle - Fits 1940-1951 Harley-Davidson EL, 1941-1951 FL
V-Twin Mfg
$48.61Carburetor main nozzle for 1940-1951 Overhead Valve models.Main nozzle holes must face intake manifold. Fits:EL 1940-1951FL 1941-1951Additional Information$48.61 -
V-Twin - 35-0475 - High Speed Carburetor Needle Valve - Fits 1940-1950 Harley-Davidson FL
V-Twin Mfg
MSRP: $77.50$76.73High speed carburetor needle valve with small head. Fits:FL 1940-1950Additional Information OEM No.27297-40 UOMSRP: $77.50$76.73 -
V-Twin - 35-0474 - Carburetor Service and Hardware Kit - Fits 1941-1965 Harley-Davidson FL, 1936-1952 EL, 1936-1956 G, 1936-1952 W
V-Twin Mfg
$78.01Linkert service and hardware kit includes a nitrophyl float, zinc plated steel screw kit, gaskets, stainless steel needle and a brass seat.Made of hi-strength nylon. Press in, with no reaming...$78.01 -
V-Twin - 35-0473 - Carburetor Throttle Shaft Bushing Set - Fits 1933-1952 Harley-Davidson WL, 1937-1948 UL, 1941-1965 FL, 1936-1940 EL, 1933-1934 VL
V-Twin Mfg
MSRP: $17.64$17.46Nylon bushings for Linkert carburetor throttle.Linkert throttle shaft bushings are constructed of high-strength nylon for ease of installation. Nylon Material: R108-118, N6. Set of 2. Fits:WL...MSRP: $17.64$17.46 -
V-Twin - 35-0471 - S&S E Carburetor Natural Finish
S&S Cycle
MSRP: $502.07$480.66V-Twin - 35-0471 - S&S E Carburetor Natural FinishDescriptionS&S E carburetor only without air cleaner and manifold. Fits:Custom applicationAdditional InformationMSRP: $502.07$480.66 -
V-Twin - 35-0465 - CV Carburetor Rebuild Kit
Sifton
$106.77V-Twin - 35-0465 - CV Carburetor Rebuild KitDescriptionRebuild your CV carburetor with this kit, includes seals, o-rings, diaphragm, and vacuum piston. Fits:FLST 1990-2017FXST 1990-2017XL...$106.77 -
V-Twin - 35-0460 - Linkert High Speed Needle Valve - Fits 1940-1952 Harley-Davidson WLA
V-Twin Mfg
$46.20Linkert carburetor high speed needle valve.Features a fixed jet and is for Army use. Fits:WLA 1940-1952Additional Information OEM No.27298-40<$46.20 -
V-Twin - 35-0458 - CV Carburetor Slow Jet
V-Twin Mfg
$30.11V-Twin - 35-0458 - CV Carburetor Slow JetDescriptionCV carburetor slow jet is .054mm. Fits:FLST 1990-2017XL 1988-UPFLT 1993-2006FXST 1990-2017FXD 1993-2017FXR 1990-1994Additional Information$30.11 -
V-Twin - 35-0454 - CV Carburetor Main Jet
V-Twin Mfg
MSRP: $15.86$15.70V-Twin - 35-0454 - CV Carburetor Main JetDescriptionCV carburetor main jet is 1.55mm. Fits:FLST 1990-2017XL 1988-UPFLT 1993-2006FXST 1990-2017FXD 1993-2017FXR 1990-1994Additional InformationMSRP: $15.86$15.70 -
V-Twin - 35-0453 - CV Carburetor Main Jet
V-Twin Mfg
MSRP: $21.86$20.44V-Twin - 35-0453 - CV Carburetor Main JetDescriptionCV carburetor main jet is 1.50mm. Fits:FLST 1990-2017XL 1988-UPFLT 1993-2006FXST 1990-2017FXD 1993-2017FXR 1990-1994Additional InformationMSRP: $21.86$20.44 -
V-Twin - 35-0452 - CV Carburetor Main Jet
V-Twin Mfg
MSRP: $19.86$19.66V-Twin - 35-0452 - CV Carburetor Main JetDescriptionCV carburetor main jet is 1.45mm. Fits:FLST 1990-2017XL 1988-UPFLT 1993-2006FXST 1990-2017FXR 1990-1994FLT 1993-UPAdditional InformationMSRP: $19.86$19.66 -
V-Twin - 35-0451 - CV Carburetor Main Jet
V-Twin Mfg
MSRP: $17.86$17.68V-Twin - 35-0451 - CV Carburetor Main JetDescriptionCV carburetor main jet is 1.40mm. Fits:FLST 1990-2017XL 1988-UPFLT 1993-2006FXST 1990-2017FXD 1993-2017FXR 1990-1994Additional InformationMSRP: $17.86$17.68 -
V-Twin - 35-0446 - EFI Check Valve Rebuild Kit
Fuel Tool
MSRP: $21.94$20.50V-Twin - 35-0446 - EFI Check Valve Rebuild KitDescriptionKit includes check valve, o-rings, and stainless steel spring to eliminate the need to replace the check valve and fuel line on all 2001-up...MSRP: $21.94$20.50 -
V-Twin - 35-0442 - Fuel Line Hose Clamp Stainless Steel
V-Twin Mfg
MSRP: $42.73$41.88V-Twin - 35-0442 - Fuel Line Hose Clamp Stainless SteelDescriptionStainless steel fuel line hose clamp is 1/4" and worm gear type.Features a slotted head screw. Fits:All modelsAdditional InformationMSRP: $42.73$41.88 -
V-Twin - 35-0425 - Bendix 40mm Carburetor Float Needle
Zippers Performance
$27.92V-Twin - 35-0425 - Bendix 40mm Carburetor Float NeedleDescriptionBendix 40mm carburetor float needle. Fits:XL 1972-1976FX 1971-1975FL 1971-1975Additional Information$27.92 -
V-Twin - 35-0424 - Bendix 38mm Carburetor Float Needle
Zippers Performance
$26.05V-Twin - 35-0424 - Bendix 38mm Carburetor Float NeedleDescriptionBendix 38mm carburetor float needle. Fits:XL 1972-1976FX 1971-1975FL 1971-1975Additional Information$26.05 -
V-Twin - 35-0422 - Keihin Carburetor Rebuild Kit
James Gaskets
$81.72V-Twin - 35-0422 - Keihin Carburetor Rebuild KitDescriptionKeihin carburetor rebuild kit contains needle, proper O-rings, and diaphragm. Fits:FLST 1990-2017XL 1988-UPFXD 1990-2017FXST 1990-2017FXR...$81.72 -
V-Twin - 35-0421 - Carburetor Fitting for Pingel Power Flow Valve
Pingel
$67.98V-Twin - 35-0421 - Carburetor Fitting for Pingel Power Flow ValveDescriptionS&S and OKO carburetor fitting for Pingel power flow valve. Fits:Custom application for Pingel Power Flow PetcockAdditional...$67.98 -
V-Twin - 35-0418 - Stainless Steel Intake Manifold Clamp Set - Fits 1978-1984 Harley-Davidson XL, FL, FX
V-Twin Mfg
$27.71Stainless steel intake manifold clamp set includes flat type seals and fillister screws.*NOTE: May require thicker manifold seal. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information$27.71 -
V-Twin - 35-0417 - Replica Cadmium Intake Manifold Clamp Set - Fits 1955-1964 Harley-Davidson FL
V-Twin Mfg
MSRP: $39.87$39.07Replica cadmium intake manifold clamp set features fillister head screws. Fits:FL 1955-1964Additional Information OEM No.9991MSRP: $39.87$39.07 -
V-Twin - 35-0416 - CV Carburetor Rebuild Kit
V-Twin Mfg
MSRP: $40.27$39.47V-Twin - 35-0416 - CV Carburetor Rebuild KitDescriptionCV carburetor rebuild kit contains needle, proper O-rings, and diaphragm, everything necessary to perform a routine carburetor service...MSRP: $40.27$39.47 -
V-Twin - 35-0415 - Power Intake Manifold Clamp Kit with O-Rings - Fits 1971-1977 Harley-Davidson FX, 1955-1977 FL, 1957-1977 XL
V-Twin Mfg
$31.45Stainlees steel power intake clamp set features a "floating bridge." Clamps close the gap under the "T" bolt for total 360 wrap around seal. This set has O-ring seals*NOTE: Includes USA made clamps...$31.45 -
V-Twin - 35-0413 - Stainless Steel Fuel Line Hose Clamp
V-Twin Mfg
$31.72V-Twin - 35-0413 - Stainless Steel Fuel Line Hose ClampDescriptionStainless steel fuel line hose clamp is 7/32" - 5/8" and worm gear type. Fits:All modelsAdditional Information$31.72 -
V-Twin - 35-0412 - Intake Manifold Adapter Rings - Fits 1971-1977 Harley-Davidson FX, 1957-1977 XL, 1966-1977 FL
V-Twin Mfg
MSRP: $11.86$11.74Intake manifold adapter rings for stroker .200 taller cylind ers are used to update early style O-ring intake manifolds a nd cylinder heads to late style flat band type seals. Fits:FX 1971-1977XL...MSRP: $11.86$11.74 -
V-Twin - 35-0411 - Intake Manifold Adapter Rings - Fits 1971-1977 Harley-Davidson FX, 1957-1977 XL, 1966-1977 FL
V-Twin Mfg
$25.37Intake manifold adapter rings for stock cylinders are used to update early style O-ring intake manifolds and cylinder heads to late style flat band type seals. Fits:FX 1971-1977XL 1957-1977FL...$25.37 -
V-Twin - 35-0410 - Chrome Intake Manifold Clamp Set
Sifton
$27.71V-Twin - 35-0410 - Chrome Intake Manifold Clamp SetDescriptionChrome intake manifold clamp set includes flat style seals and allen screws. Fits:XL 1978-1984FL 1978-1984Additional Information$27.71 -
V-Twin - 35-0395 - Linkert Fixed Needle Cap Set - Fits 1940-1943 Harley-Davidson WLA
V-Twin Mfg
$22.96Linkert fixed needle cap set.Sold as a pair. Fits:WLA 1940-1943Additional Information OEM No.27304-40 UO$22.96 -
V-Twin - 35-0384 - Vacuum Hose Plugs
Pingel
MSRP: $9.94$9.83V-Twin - 35-0384 - Vacuum Hose PlugsDescriptionVacuum hose plugs are great for sealing off vacuum lines when removing stock vacuum-operated fuel valves. Fits:FLST 1995-2017FXST 1995-2017FXD...MSRP: $9.94$9.83 -
V-Twin - 35-0383 - CV Carburetor Slow Jet
V-Twin Mfg
$30.20V-Twin - 35-0383 - CV Carburetor Slow JetDescriptionCV carburetor slow jet is .048mm. Fits:FLST 1990-2017XL 1988-UPFLT 1993-2006FXST 1990-2017FXD 1993-2017FXR 1990-1994Additional Information$30.20 -
V-Twin - 35-0382 - CV Carburetor Slow Jet
V-Twin Mfg
$30.20V-Twin - 35-0382 - CV Carburetor Slow JetDescriptionCV carburetor slow jet is .045mm. Fits:FLST 1990-2017XL 1988-UPFLT 1993-2006FXST 1990-2017FXD 1993-2017FXR 1990-1994Additional Information$30.20 -
V-Twin - 35-0381 - CV Carburetor Slow Jet
V-Twin Mfg
$31.47V-Twin - 35-0381 - CV Carburetor Slow JetDescriptionCV carburetor slow jet is .042mm. Fits:FLST 1990-2017XL 1988-UPFLT 1993-2006FXST 1990-2017FXD 1993-2017FXR 1990-1994Additional Information$31.47 -
V-Twin - 35-0380 - CV Carburetor Slow Jet
V-Twin Mfg
$25.49V-Twin - 35-0380 - CV Carburetor Slow JetDescriptionCV carburetor slow jet is .040mm. Fits:FLST 1990-2017XL 1988-UPFLT 1993-2006FXST 1990-2017FXD 1993-2017FXR 1990-1994Additional Information$25.49 -
V-Twin - 35-0379 - CV Carburetor Main Jet
V-Twin Mfg
$22.96V-Twin - 35-0379 - CV Carburetor Main JetDescriptionCV carburetor main jet is 1.85mm. Fits:FLST 1990-2017XL 1988-UPFLT 1993-2006FXST 1990-2017FXD 1993-2017FXR 1990-1994Additional Information$22.96
About Carb & Fuel
Harley-Davidson Carb & Fuel Systems – Air Cleaners, Carburetors & Fuel Injection Parts
Harley-Davidson carb and fuel components support the complete path from incoming air to fuel delivery and engine induction. The range includes Harley-Davidson air cleaner kits, replacement air filters, backing plates, breather components, velocity stacks, intake manifolds, carburetors and carburetor service parts for applications ranging from early Linkert, Bendix and S&S systems to Keihin CV and Mikuni carburetors. Fuel-injected applications are also represented through fuel injectors, fuel pumps, fuel lines, pressure regulators, throttle bodies, EFI controllers and related induction components. Harley-Davidson service information identifies separate air-cleaner assemblies for carbureted and fuel-injected models, including filter elements, covers, backplates, breather hardware, seals and intake components.
The category includes Harley-Davidson carburetor rebuild kits, jets, jet kits, accelerator pump components, float bowls, mixture screws, diaphragms, choke and throttle hardware, intake manifold seals and carburetor-specific repair components. For EFI systems, the range extends to Harley-Davidson fuel injectors, fuel pump assemblies, fuel filters, fuel lines, fuel pressure regulators, throttle bodies, fuel-management modules and electronic tuning equipment. Air intake products include high-flow air cleaner kits, performance air filters, rain socks, backing plates, air cleaner covers, velocity stacks and complete induction systems from manufacturers such as Arlen Ness, S&S Cycle, K&N, Mikuni, V-Twin, Trask, Cobra, Feuling and other brands.
Fitment is especially important across Harley-Davidson fuel system parts because carburetor design, intake configuration, EFI equipment, fuel-line connections, injector specifications and air-cleaner mounting arrangements vary between model families and years. The catalog covers Sportster, Softail, Dyna, Touring, Big Twin, Evolution, Twin Cam, Milwaukee-Eight and older Harley-Davidson applications, along with specialized carburetor and intake components for earlier engines. Matching the correct carburetor, air cleaner, intake manifold, fuel component or EFI tuning device to the motorcycle's existing system helps ensure compatibility when performing maintenance, rebuilding an older fuel system, replacing worn components or changing the intake and fuel-delivery configuration.