Search By Vehicle

Chrome rear wheel hub include bearings, races seals, seal spacers. This hub comes fully assembled, and constructed of steel, chromed. Fits:FLT 1986-1997Additional Information

Chrome wheel hub is constructed of steel and includes 3/4" bearings, races, seals, and seal spacers.This hub has 3/8" and 7/16" disc mount holes. The width of the hub through the axle measures 7"...

Zinc plated 25mm axle with a hex head and a threaded end, as original, is used to replace a worn out or damaged axle.Axle is precisioned machined with a ground bearing surface. Includes the correct...

Replica 25mm rear wheel hub bearing kit for use with non-ABS models. Fits:FLT 2008-2008 RearAdditional Information UOM1 - KIT

Replica front or rear wheel hub 1" bearing kit. For use with non-ABS models. Fits:FLT 2000-2007Additional Information OEM No.43517-00

These are replacement nuts for the swingarm pivot pin. Fits:FLT 2002-2008Additional Information OEM No.47606-02

Swingarm cup washer set. Fits:FLT 2002-2010Additional Information OEM No.47491-02 UOM1 - SET

Chrome rear axle spacer set features 3/4" inner diameter with an overall length of 1-5/8".Axle spacer fits right and left side on 1986-1999 Touring models. Fits:FLT 1986-1999Additional Information

FLT rear wheel hub bearing kit is for on non-ABS models and 25mm axle. Fits:FLT 2009-2019 RearAdditional Information OEM No.41456-08C

Axle with a flat head and a threaded end is used to replace a worn out or damaged axle.Axle is precisioned machined with a ground bearing surface. Includes the correct threads to accept all original...

Zinc rear axle kit includes the cam adjuster, slotted nut and spring kit. Fits:FLT 2014-2019Additional Information UOM1 - KIT

25mm rear stainless steel axle kit includes adjusting screws, lock nuts, drill and center punch.Kit works with stock pulley or chain conversion. *NOTE: Requires minor swingarm modification with drill...

Axle with threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle. Includes spacers and nut. Fits:FXST 1985-2006FLST 1986-2006FLT 1980-1984FLT...

Rear axle adjuster set features a zinc finish. Fits:FLT 1997-2001XL 1997-2004Additional Information OEM No.41112-79

Front or rear hub bearing rebuild kit includes all internal parts including longest length inner spacer which is 4.4480" long.The inner spacer can be cut down or you can remove the collar for certain...

Kit includes 10-5/8" bearing surface length axle, nuts, spacer and hardware. Fits:FLH 1981-1984Additional Information OEM No.43867-81

Assembly includes 2 of each bearing, race, seal and one seal spacer.Order snap rings, seal washer and internal bearing spacers separately. Fits:FLT 1984-1999 steel hub, wire wheelFXST 1986-1999 steel...

Chrome 3/4" axle with hex head and threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle. Axle features a chrome finish.Does not have hole for cotter...

1" axle with a flat head and a threaded end 12-1/4" bearing surface length and can be used to replace a worn out or damaged axle. Fits:FLT 2002-2007Additional Information

Front or rear wheel hub bearing assembly kit includes bearings, races, seals, snap rings, and seal spacers.Hub and internal bearing spacer are not included. Fits:FLH 1973-1983FX 1980-1983Additional...

Front wheel bearing, race and seal kit includes 2 each bearings, race, and seals. Fits:FX 1973-1983 Cast or Wire WheelsFLH 1973-1979 Cast WheelsFXR 1982-1983 Cast or Wire WheelsXL 1973-1983 Cast or...

Zinc front axle spacer is for the left side and has an inner diameter of 3/4" and an overall length of 1-1/4". Fits:FLT 1995-1999 Front Left FitmentAdditional Information

Chrome front axle spacer is for the left side with an inner diameter of 3/4", outer diameter of 1.1390", and a total overall length of 1.25 Fits:FLT 1995-1999 Front Left FitmentAdditional Information

Axle with threaded end has a 10-3/4" bearing surface length and can be used to replace a worn out or damaged axle. Fits:FLT 2000-2007Additional Information OEM No

Front or rear wheel hub bearing tube spacer with 3/4" inner diameter.May be used in some cast mag wheel applications when flange is removed. For front use on FXWG and for rear use on FXST model...

Rear axle sleeve Fits:FL 1963-1966 Rear axleFLH 1963-1966 Rear axleAdditional Information OEM No.41600-63

Chrome rear axle spacer. Fits:FL 1958-1966 rear axleFLH 1958-1966 rear axleAdditional Information OEM No.41595-58

Rear axle kit includes chrome spacers and nut with a zinc plated axle. Fits:FLT 2008-2008Additional Information UOM1 - KIT

Rear axle kit includes a 25mm axle, left side axle adjuster cam and an axle nut kit in a zinc finish. Fits:FLT 2009-2013Additional Information UOM1 - KIT

Rear axle kit includes spacers, nut and axle in chrome. Fits:FLT 2009-2013Additional Information UOM1 - KIT Fi

1" rear axle kit includes a 12-1/2" bearing surface length axle with an outer diameter of 3/4", and spacer nut. Fits:FLT 2000-2001Additional Information UOM<

Rear axle with hex head and threaded end has a 10-3/4" bearing surface length and can be used to replace a worn out or damaged axle. Axle features a parkerized finish. Fits:FLH 1958-1966FL...

Zinc plated .750 rear axle with hex head and threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle.The axle features a 3/4" outer diameter with a...

Rear axle kit includes a 12-1/2" axle with an outer diameter of 1", nut kit and spacers.Kit includes two cam washers. Fits:FLT 2002-2007Additional Information

Adapter kit with front axle is used when a large type disc caliper is mounted to a glide fork.Kit for 1972 FLH only, first year of disc brake, accepts 10" rotor and black banana caliper. Fits:FLH...

Axle with hex head and threaded end has a 10-3/4" bearing surface length and can be used to replace a worn out or damaged axle. Fits:FLH 1958-1966FL 1958-1966Additional Information

3/4" axle with hex head and threaded end has a 11-1/4" bearing surface length and can be used to replace a worn out or damaged axle. Fits:FLT 1980-1999FLST 1986-2006FXST 1984-2006FXR...

3/4" axle with hex head and threaded end has a 10-3/4" bearing surface length and can be used to replace a worn out or damaged axle. Features a chrome finish. Fits:FLH 1958-1966FL 1958-1966Additional...

Axle with threaded end has a 10-5/8" bearing surface length and can be used to replace a worn out or damaged axle.For use on 41mm forks. Order nut kit separately. Fits:FXDWG 1993-2005FXST...

Zinc rear axle with hex head and threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle. The axle features a 1" diameter with 5/8"-18 threads. Fits:XL...