Shop By Motorcycle

V-Twin - 50-1661 - Panhead Luggage RackDescriptionReplica Panhead luggage rack feature the 3 channel design.Replica luggage rack replaces OEM #53403-52. Requires OEM #53457-52, Panhead luggage rack stud nuts, for installation. The fender must first be...

V-Twin - 10-0318 - Cam Chest Assembly Kit PanheadDescriptionPanhead cam chest kit includes a natural finish cam cover and all internal parts.Assembly features a keyway slot. NOTE: Check the pinion and cam gears tolerance during assembly. Fits:FL...

V-Twin - 10-0317 - Cam Chest Assembly Kit PanheadDescriptionPanhead cam chest kit includes a natural finish 8-finned cam cover and all internal parts.NOTE: Check the pinion and cam gears tolerance during assembly. Fits:FL 1948-1953Additional Information ...

V-Twin - 10-0316 - Flatside Shovelhead Cam Case KitDescriptionFlatside Shovelhead cam case kit includes a cast finish cam cover and all internal parts for assembly.Accept Overhead oiler configuration. Cover is drilled for oil feed lines screw. Cam cover...

V-Twin - 10-0006 - Shovelhead 80 inch Short BlockDescriptionV-Twin short block is shipped fully assembled and a Manufacturer Statement of Origin is supplied.Unit features an S&S crankcase, oil pump and breather assembly, stock stroke flywheels, Timken...

V-Twin - 40-2102 - Knucklehead Banjo Oil Line Kit Zicad PlatedDescriptionBanjo oil line kit features a zicad finish. Kit includes banjo y-line, with oiler bolts, brass washers and fittings.Kit gives motor the early look with conversion of banjo line...

V-Twin - 10-0003 - S&S Stock Bore Shovelhead Engine Crankcase SetDescriptionCrankcase set comes ready to assemble.S&S Crankcase Sets are shipped set-up with Timken left side bearing and race assembly, seal and seal spacer, oil pump drive bushing, needle...

Drag Specialties - Red Stitched Double Diamond Extended Reach Predator III Seat fits '08-'24 Touring Models (Except '23 FLHXSE/FLTRXSE) (Open Box) Features: Moves the rider back 1-1/2" compared to stock FLHR seat and 1" on FLTRX Road Glide and FLHX...

Drag Specialties - DS750606 - Cylinder - Rear - 74" - 1948-1965 PanheadFeaturesCast-iron cylinders meet or exceed OEM tolerance specificationsWithstand greater pressure and heat than stockReplacement Part for OEM...

Drag Specialties - DS750607 - Cylinder - Front - 74" - 1948-1965 PanheadFeaturesCast-iron cylinders meet or exceed OEM tolerance specificationsWithstand greater pressure and heat than stockReplacement Part for OEM...

Drag Specialties - DS750605 - Cylinder - Front - 1200cc - 1966-1980 ShovelheadFeaturesCast-iron cylinders meet or exceed OEM tolerance specificationsWithstand greater pressure and heat than stockSpecsDisplacement1200 ccMaterialCastRiding...

Drag Specialties - DS750604 - Cylinder - Rear - 1200cc - 1966-1980 ShovelheadFeaturesCast-iron cylinders meet or exceed OEM tolerance specificationsWithstand greater pressure and heat than stockSpecsBore Size Imperial3.435''MaterialAluminumRiding...

Drag Specialties - DS325176 - Upper Belt Guard - '80-'85 FXB/FXSB '80-'86 FXWG '82-'84 FLHS Shovelhead - ChromeFeaturesSimple bolt-on installationHigh-quality chromed stamped-steel upper rear belt guardReplacement Part for OEM...

Drag Specialties - DS246010 - Rocker Oil Line Set - Chrome - ShovelheadFeaturesChromed steel overhead oil line set includes crossover line and crankcase-to-rocker box lineComplete with fittings and seals, which are also available separatelySpecsBase...

Drag Specialties - DS194024 - Lifter Block - Black - ShovelheadFeaturesCome complete with two sets of Allen cap screws (1/4"-24 for 66-E76 and 1/4"-20 for L76-84), completely machined and ready for installationMade from durable cast iron and finished in...

Drag Specialties - DS194025 - Lifter Block - Chrome - ShovelheadFeaturesCome complete with two sets of Allen cap screws (1/4"-24 for 66-E76 and 1/4"-20 for L76-84), completely machined and ready for installationMade from durable cast iron and finished in...

Drag Specialties - DS193788 - Pushrod Tube Assembly - PanheadFeaturesOriginal-style replacement for Panhead models; includes everything neededEach motor requires four tube assemblies.SpecsColor/FinishChromeProduct NameTube AssemblyRiding...

Drag Specialties - DS193800 - Rocker Arm - Rear Exhaust/Front Intake - ShovelheadFeaturesOEM style rocker armsReplacement Part for OEM Number(s):1736066ASpecsApplicationExhaustMounting PositionFront IntakeMounting PositionRear ExhaustProduct NameRocker...

Drag Specialties - DS193801 - Rocker Arm - Front Exhaust/Rear Intake - ShovelheadFeaturesOEM style rocker armsReplacement Part for OEM Number(s):1737566ASpecsMounting PositionRear IntakeRiding StyleStreetApplicationIntakeApplicationExhaustMounting...

S&S Cycle - 4" 50 State Grand National Slip-On Muffler fits '25 FXBB/​FXLRS/​FXLRST/​FLHC Models Features: Race-inspired design with a 4" outside diameter muffler body Removable dB reducer for back pressure and sound tuning Meet J2825 levels...

ODI - Ruffian Lock-On Harley Grips - fits 2008-2023 TBW Features: Moto inspired grip designed for performance V-Twin models Legendary Ruffian full-knurl diamond pattern Thin profile delivers amazing control, feedback and traction Proprietary...

ODI - Ruffian Lock-On Harley Grips - Cable Throttle Features: Moto inspired grip designed for performance V-Twin models Legendary Ruffian full-knurl diamond pattern Thin profile delivers amazing control, feedback and traction Proprietary...

Arlen Ness - 18" Carbon Fiber Fat Wrapper Front Fender fits '24-'25 FLT Model Features: Full-length carbon fiber front fender for 18” x 5.5” fat/wide front wheels Made from premium pre-preg carbon fiber in CNC machined billet aluminum...

Arlen Ness - 21" Carbon Fiber Fat Wrapper Front Fender fits '23-'24 Touring Models Features: Full-length carbon fiber front fender for 21” x 5.5” fat/wide front wheels Made from premium pre-preg carbon fiber in CNC machined billet...

Vance & Hines - Weaved Carbon Fiber VO2 Falcon Air Intake Kit fits '91-'22 Sportster Models (Except RH Sportster) Features: Clean minimalist design of the VO2 Falcon yields a streamlined hot rod look that is equally powerful in its simplicity as...

Vance & Hines - Weaved Carbon Fiber VO2 Falcon Air Intake Kit fits '99-'07 Touring (Except '99-'01 Touring Fuel Injection w/ Lower Fairings), '00-'15 Softail (Except '11-'15 CVO), '99-'17 Dyna Models (Except '16-'17 FXDLS) Features: Clean...

Vance & Hines - Weaved Carbon Fiber VO2 Falcon Air Intake Kit fits '08-'16 Touring/H-D FL Trike, '16-'17 FXDLS, '16-'17 Softail, '14-'15 FLSTNSE, '13-'14 FXSBSE, '11-'12 FLSTSE Models Features: Clean minimalist design of the VO2 Falcon yields a...

Vance & Hines - Forged Carbon Fiber VO2 Falcon Air Intake Kit fits '91-'22 Sportster Models (Except RH Sportster) Features: Clean minimalist design of the VO2 Falcon yields a streamlined hot rod look that is equally powerful in its simplicity as...

Vance & Hines - Weaved Carbon Fiber VO2 Falcon Air Intake Kit fits '18-'24 Softail Models Features: Clean minimalist design of the VO2 Falcon yields a streamlined hot rod look that is equally powerful in its simplicity as it is in its...

Vance & Hines - Forged Carbon Fiber VO2 Falcon Air Intake Kit fits '17-'23 Touring (Except '23 FLHXSE/​FLTRXSE), '17-'24 H-D FL Trike Models (Except FLHTCUTG) Features: Clean minimalist design of the VO2 Falcon yields a streamlined hot rod look...

S&S Cycle - 930-0052 - Time Saver Pushrods - Big Twin | ShovelheadFeaturesPushrods adjust from 9.500" to 11.500"9 mm diameter provides superior strength and durabilityRemoval of rocker boxes is not requiredAdjusting end is .354\Made in the U.S.A.Not for...

Kibblewhite - 20-4195 - Valve - Exhaust - 1.750" - Standard - Panhead | ShovelheadFeaturesOne-piece stainless-steel, stellite-tipped valve is fortified by a special nitrided process with .002" depth and .0002" surface buildup to improve wear properties...

Klock Werks - KWW-01-0762-DS - Flare™ Windshield - 12" - Dark Smoke - FLHXFeaturesThe innovative design of the Flare™ features “hips” at the outer edge of the shield that re-route the air to add downforce to the front of the bike, improving stability vs...

Klock Werks - KWW-01-0747 - Kolor Flare™ Windshield - 6-1/2" - Bronze - FLHXFeaturesThe innovative design of the Flare™ features “hips” at the outer edge of the shield that re-route the air to add downforce to the front of the bike, improving stability...

Klock Werks - KWW-01-0762-T - Flare™ Windshield - 12" - Tinted - FLHXFeaturesThe innovative design of the Flare™ features “hips” at the outer edge of the shield that re-route the air to add downforce to the front of the bike, improving stability vs...

Klock Werks - KWW-01-0746 - Kolor Flare™ Windshield - 6-1/2" - Purple - FLHXFeaturesThe innovative design of the Flare™ features “hips” at the outer edge of the shield that re-route the air to add downforce to the front of the bike, improving stability...

Klock Werks - KWW-01-0745 - Kolor Flare™ Windshield - 6-1/2" - Blue - FLHXFeaturesThe innovative design of the Flare™ features “hips” at the outer edge of the shield that re-route the air to add downforce to the front of the bike, improving stability vs...

Klock Werks - KWW-01-0744 - Kolor Flare™ Windshield - 6-1/2" - Green - FLHXFeaturesThe innovative design of the Flare™ features “hips” at the outer edge of the shield that re-route the air to add downforce to the front of the bike, improving stability vs...

Klock Werks - KWW-01-0743 - Kolor Flare™ Windshield - 6-1/2" - Yellow - FLHXFeaturesThe innovative design of the Flare™ features “hips” at the outer edge of the shield that re-route the air to add downforce to the front of the bike, improving stability...

Klock Werks - KWW-01-0742 - Kolor Flare™ Windshield - 6-1/2" - Orange - FLHXFeaturesThe innovative design of the Flare™ features “hips” at the outer edge of the shield that re-route the air to add downforce to the front of the bike, improving stability...