Shop By Motorcycle

V-Twin - Chrome Handlebar Control Kit 5/8" Bore Master Cylinder fits '84-'95 FX/XL & FXR Models Features: Chrome handlebar control kit, 3/4" bore, includes master cylinder, clutch handle with clamps, and two pairs of switch housings Master...

V-Twin - Chrome 48" Handlebar Switch Kit fits Big Twin Models Handlebar switch kit includes complete right and left switch assemblies, brake light switch, mounting screws, and clips. Switch kit measures 48" long and has a chrome finish. Fitment: FXR...

V-Twin - Swingarm Bearing Kit with Spherical Bearings fits '82-'02 FLT, '82-'94 FXR Models Swingarm bearing kit with spherical bearings controls lateral and torsional movement at pivot point Kit Includes: Swingarm retaining ring rear fork, nylon...

V-Twin - Black Front 1 Piston Caliper Set fits FXR & XL Models (OEM #44195-80) Features: Caliper set includes body, 1 piston, seals right and left, brake pads and inner and outer plates flat black finish Order mounting hardware separately Sold...

V-Twin - 35mm Fork Tube Set 23-3/8" fits '87 FXR, '86-'08 Sportster Models (OEM #45407-86) - Chrome Features: Fork tube set has stock length of 23-3/8" Before installing, compare new and old tubes Be sure the stock top plugs it into the new fork...

V-Twin - 23-1/2" Hard Chrome 35mm Fork Tube Set fits '73-'74 Sportster & FX Model Features: This fork tube set is stock 35mm diameter X 23-1/2" long Before installing, compare new and old tubes Be sure the stock top plugs fit into the new fork...

V-Twin - Chrome 35mm Fork Tube w/ 23-1/2" Length fits '73-'77 FX, '73-'74 Sportster Models (OEM #45977-73) Fork tube set is 23-1/2" stock length, Before installing, compare new and old tubes. Be sure the stock top plug threads into the new fork...

V-Twin - Chrome 35mm Fork Tube w/ 25-1/4" Length fits '75-'83 XLCH, '79-'82 XLS, '77-'83 FXS Models (OEM #45644-77) Fork tube set is 2" over stock length for XLH, XLXH, XLCR, 1983 XLX, XLS models and stock length for 1979-1982 XLS models. Before...

V-Twin - 23-1/4" Hard Chrome 35mm Fork Tube Set fits '76-'83 FX, '75-'83 XLCH/XLH Models Features: Hard chrome fork tubes are Showa type with a stock length of 23-1/4" Before installing, compare new and old tubes. Be sure the stock top plugs it into...

V-Twin - Brake Pedal Polished Alloy fits '82-'94 FXR Model (OEM #42523-82) FXR brake pedal has a polished alloy finish and includes the bushings installed Note: Must order rod end, wave washer, cotter pin and the master cylinder, which includes the...

V-Twin - Primary Gasket Kit fits '85-'94 FLT, '84-'93 FXR Models FXR/FLT Primary gasket kit is a three piece kit Fitment: FLT 1985-1994 FXR 1984-1993 Late 1984

V-Twin - Shifter Linkage Kit fits '81-'84 FXR Model FXR shifter linkage kit includes rod, heel toe shifter lever , shifter lever, V-Tech inspection cover and inner shifter lever. Fitment: FXR 1981-1984 early 1984 FXR 1984-1984 early 1984

V-Twin - Shifter Sleeve Kit fits '84-'94 FXR Model FXR shifter sleeve kit includes a nylon sleeve, lock tab and 2 o-rings Note: The long sleeve goes between the two outer brass bushings - one is the inspection cover and one is the inner primary...

V-Twin - Shifter Rod Assembly fits '82-'94 FXR Model (OEM #33728-82A) FXR shifter rod assembly includes right and left hand ball ends with nuts. For use on FXR mid control shifter installation. Fitment: FXR 1982-1984 FXR 1985-1994

V-Twin - Mid Control Kit fits '82-'86 FXR Model - Black Features: FXR mid control kit features a black peg brackets and polished brake pedal Factory style components for installation Order brake line, reservoir feed line and additional hardware...

V-Twin - Mid Control Kit Black W/ Gaskets & Footpegs fits '87-'93 FXR Model FXR mid control kit includes black foot peg mounts, polished brake pedal, primary insepction cover, chrome shifter and a chrome master cylinder Kit Includes: Factory...

V-Twin - Mid Control Kit Chrome W/ Footpegs fits '87-'93 FXR Model FXR mid control kit includes chrome bracket, pedal footpeg mounts, and stock driver footrests. Fitment: FXR 1987-1993

V-Twin - Mid Control Kit fits '83-'86 FXR Models - Chrome Features: FXR mid control kit features chrome mounts, chrome brake pedal and footpeg supports. factory style components for installation. Order brake line, reservoir feed line and additional...

V-Twin - Rear Brake Plunger Zinc Plated fits '82-'87 FXR Model (OEM #42437-82) Zinc plated FXR rear brake plunger features a 5/16" x 24 thread and measures 2-7/8" from the hole to the end of the thread. Note: The clevis pin is not...

V-Twin - 35mm Triple Tree Set Chrome fits '82-'87 FXR Model 35mm FXR triple tree set features a chrome finish. Fitment: FXR 1982-1987

V-Twin - 39mm Triple Tree Set Polished fits '88-'03 Sportster, '88-'94 FXR Models 39mm FXR triple tree set includes a polished top and lower tree. Fitment: FXR 1988-1994 XL 1988-2003

V-Twin - Stock Kickstand Black fits '82-'90 FXR Model Features: Stock length kickstand features a black finish and is for FXR models Pin not included, must order separately Fitment: FXR 1982-1990

V-Twin - Electrical Wiring Panel Set Black fits '86-'94 FXR Model Features: Black flat left and offset right FXR electrical wiring panel set Panels mount by 1/4"-20 well nuts and 1/4" x 20 x 3/4" screws The right side accepts a starter relay and 4...

V-Twin - Fuel Petcock Alloy fits '82-'94 FXR Models Fuel petcock with 90° elbow features an alloy finish specifically designed for FXR models. Note: Petcock has a 5/16" fuel outlet. Fitment: FXR 1982-1994

V-Twin - Rear Axle Kit Zinc Plated fits '82-'94 FXR Model FXR rear axle kit includes zinc plated components and has a 3/4" diameter. Fitment: FXR 1982-1994

V-Twin - Mid Control Kit W/ Pegs & Rear Brake Msster Cylinder for '06-'17 FXD FXD mid control kit includes chrome components and is for stock replacement on FXD mid control models where the shifter shaft goes through the primary cover, or for the...

V-Twin - Rear Brake Pedal Polished for '91-'17 FXD (OEM #42617-99) FXD polished rear brake pedal. Note: Brake rod included. Fitment: FXD 1991-2017

V-Twin - 39mm Single Disc Fork Assembly Chrome  for '00-'03 FXD 39mm single disc fork assembly features chrome lower sliders, springs, hard chrome fork tubes and components installed. Assembly accepts 2000-up type calipers. Assembly measures...

V-Twin - 39mm Triple Tree Set Chrome for '90-'05 FXD FXD 39mm triple tree set includes chrome top tree, chrome bottom tree, dust shield set and stem nut. Fitment: FXD 1990-2005

V-Twin - 49mm Triple Tree Set Polished for '08-'17 FXD Polished 49mm triple tree set includes 1 upper and 1 lower fork tree, narrow type. Fitment: FXD 2008-2017

V-Twin - 45 Amp Three Phase Alternator Kit for '99-'03 FXD/FXDWG FXD three phase alternator kit is 45 amp. Fitment: FXDWG 1999-2003 FXD 1999-2003

V-Twin - 50 Amp Three Phase Alternator Kit fits '12-'17 FXD/FXDWG FXD three phase alternator kit is 50 amp. Fitment: FXD 2012-2017 FXDWG 2012-2017

V-Twin - Stock Shape 5.1 Gallon Gas Tank Raw for '10-'17 FXDWG/FXDB (OEM #61593-10) Raw replacement gas tank has a right side bung, and a left side fuel gauge opening. The tank is for EFI models, and has a fuel capacity of 5.1 gallons. Check the tank...

V-Twin - Dash Panel fits '95-'03 FXD, '88-'94 FXR Models (OEM #67185-88, 67189-95) This dash panel features a black or chrome finish. For FXD and FXR models, accepts 85MM GPS speedometers and electric tachometers. Can be installed on 1948-1984 2 piece...

V-Twin - Dash Panel Bib Black for '93-'06 FXD (OEM #61655-91) FXD dash panel extension features a black finish. Fitment: FXD 1993-2006

V-Twin - Bobbed 2.3 Gallon Gas Tank fits '84-'99 FXST, '86-'99 FLST Models Bobbed gas tank accepts a left side petcock and has a fuel capacity of 2.3 gallons. Tank includes mounting hardware. Specifications: Fuel Capacity: 2.3 gallons. Petcock...

V-Twin - Replica XL 2 Gallon Steel Gas Tank Raw fits '57-'78 Sportster Model Features the classic XR 750 style with raw steel construction. Specifications: Petcock located on the right side. Accepts bung-style vented gas cap (must be ordered...

V-Twin - Hap Jones Peanut 2.0 Gallon Gas Tank Hap Jones 2.0 gallon gas tank is the hi-tunnel type with a die cast Chopper bayonet style gas cap. Gas tank accepts 1/4 inch petcocks.

Burly Brand - 12" Handlebar Cable/Line Kit for Ape Hanger Handlebars fits '18-'23 FXBB/​FXLR/​FXST W/O ABS - Black Vinyl Features: Complete installation kit for Burly Ape hangers Kit includes extended brake line (unless noted), extended clutch...

Burly Brand - 13" Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hanger Handlebars fits '17-'20 FLHTCU/L, FLHTK/L, FLHX/S W/ ABS Features: Complete installation kit for Burly Ape hangers Kit includes extended brake line (unless noted),...