Softail Engine

Jims - 2233 Tappet Oil Filter Plug Tool fits '70-'99 Big Twin Models Features: Removes oil screen without removing exhaust Used to remove the tappet oil screen plug Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Jims - 1010 Evolution Rod Alignment Tool for 0.791” Wrist Pin Features: Use to check rod straightness without removing the rods from the cases Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...

Jims - 1047-TP Crank Assembly Removal Tool fits '55-'06 Big Twin Models (Except '06 Dyna) Features: This tool can only be used for removing the flywheel from the left case Will also press cases apart and break sealant bond Some case pressing will...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to keep rollers from falling into the crankcase Comes with...

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Custom Cycle Engineering - 41 mm Wide Glide Tweek Bar - Chrome Features: Original Randy Smith design As in the good old days with extended front tubes, the need for a tweek bar is here again Vast improvement over the tweek bars used in the 60s and...

Drag Specialties - 2-1/4" Chrome Magnetic Ring Oil Filter With Nut fits 'L82-'86 FX/FL, '80-'E85 Sportster Models (OEM #63782-80A, 63810-80) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed with a magnetic ring...

Drag Specialties - Oil Filter with Nut fits '17-'24 M-Eight Model (High Capacity) (OEM #627002-96, 627002-97) Features: High-quality spin-on filters are a dependable replacement Note: Features a 17 mm hex nut on the end of the filter for easy...

Drag Specialties - Oil Filter Wrench fits '01-'21 Big Twin Models Features: 14-flute cutout design to clear crank sensor Fits Drag Specialties and most other oil filters with 14 flutes Fitment 2018 Harley-Davidson Softail Breakout...

V-Twin - Panhead Style Evolution Rocker Box Set fits '84-'99 FXST/FLST, '84-'98 FLT/FXD Models - Black Panhead Evolution rocker box set features a bolt on Panhead look for Evolution models and a black finish. Retro conversion kit includes black Panhead...

S&S Cycle - Stock Heads Intake Manifold O-Ring fits '84-'16 Big Twin, '86-'16 Sportster Models (OEM #26992-99, 26995-86A) Features: Sold Each Made from the highest-quality materials available Made in the USA Replacement Part for...

S&S Cycle - Billet Oil Pump Kit fits '92-'99 Evolution Big Twin Models Features: Kit includes an oil pump with cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and...

S&S Cycle - Oil Pump Replacement Gasket Kit fits '36-'69 Big Twin Models Features: Made in the U.S.A. Fitment 1991 Harley-Davidson Dyna Sturgis FXDB - - 1990-1991 Harley-Davidson Low Rider Convertible...

S&S Cycle - Rocker Arm Shafts fits '99-'17 Twin Cam & '86-'22 Sportster Models (Except RH Sportster (OEM #17611-83)) Features: Made in the U.S.A. Fitment 2018-2020 Harley-Davidson Iron 1200...

S&S Cycle - Rocker Box Gasket Kit fits EVO Big Twin Models Features: Replacement gasket kit for rocker box part number 90-4095 Fitment 2000 Harley-Davidson FXR 4 - - 1999 Harley-Davidson Softail Night Train...

S&S Cycle - Rocker Box Gasket Kit fits Twin Cam Models Features: Includes all required gaskets and O-rings for both rocker boxes Fitment 2017 Harley-Davidson Road King Special FLHRXS - - 2016-2017 Harley-Davidson CVO Pro...

S&S Cycle - Compression Release Hole Plug Features: Not for use on OEM heads Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Fat Boy S FLSTFBS - - 2016-2017 Harley-Davidson Softail Slim S...

S&S Cycle - Tappet Alignment Tool fits 'L76-'17 Big Twin Models (Except M-Eight) Features: Big Twin Evolution tappet blocks do not have counter-bored bolt holes; therefore, when a tappet block is removed (or even just loosened) it should be...

S&S Cycle - Rocker Cover Wrench Set Features: Four wrenches of different lengths for those hard-to-get-to rocker box screws For use on all Big Twin and XL Evolution-style motors Made in the U.S.A...

Feuling - Hydraulic Camchain Tensioner Kit fits '17 & Up M8 Model Features: Install or replace hydraulic camchain tensioners on stock M8 models Kit includes out chain, outer crank 17 tooth crank sprocket, replacement camchain pad and pin, and...

Feuling - 487 Series Chain Drive Reaper® Camshaft fits M8 Model Features: Good for 4.25" stroke with 114"-117" engine looking for an agressive bolt in Produces a wide powerband Responds very well to increased bore and/or compression, exhaust...

Colony - 8610-1 5/8"-18 Crankcase/Oil Tank Hex Timing Plug fits '86-'95 Sportster Models (OEM #2326-26) Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing plug...

Colony - 8703-2 Relief Valve Plug Kit fits '81-'84 Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

Colony - 9884-20 Zinc Motor Case Bolt Kit fits '96-'98 Evolution Big Twin Models (OEM #3398, 3504A) Features: Includes all necessary hardware for bolting together the motor case Made in the U.S.A. Replacement Part for...

Colony - 9877-2 Cadmium Oil Screen Plug fits '70-'80 Big Twin Models (OEM #657) Features: Oil Screen plug for Big Twin models Made in the USA Fitment 1984 Harley-Davidson Electra Glide Special...

Cometic - Top End Gasket Kit fits '00-'06 FXST/FLST/FXD/FLT Models Cometic EST top end gasket kit. Fitment: 2000-2006 FXST 2000-2006 FLST 2000-2006 FXD 2000-2006 FLT Tech Note: Suggested to use with 107" Conversion Kit

Colony - 9213-4 Inner Pushrod Cover fits '84-'98 FXST, '79-'98 FLT, '79-'84 FX/FL Models (OEM #17935-79) Inner pushrod cover. Fitment: FXST 1984-1998 FX 1979-1984 FLT 1979-1998 FXD 1991-1998 FXR 1984-1994 FL 1979-1984 FLST 1986-1998

Colony - 9306-7 Cam Cover Cadmium Screw Kit fits '70-'84 FL, '91-'92 FXD, '82-'92 FXR Models Cam cover screw kit with a cadmium finish. Fitment: FL 1970-1984 FXD 1991-1992 FXR 1982-1992 FX 1971-1984 FXST 1984-1992 FLT 1979-1992 FLST 1986-1992

Colony - 9403-1 Cadmium Allen Timing Plug fits '84-'99 FXST, '91-'99 FXD, '82-'94 FXR Models Allen timing plug has a cadmium finish. Fitment: FXST 1984-1999 FXD 1991-1999 FXR 1982-1994 FLST 1986-1999 FX 1971-1984 FLT 1979-1999 EL 1936-1940 FL...

Colony - 9407-1 Oversize Timing Plug Tap fits '84-'98 FXST, '82-'94 FXR, '57-Up Sportster Models Oversize tap for oversized timing plug measures 11/16"-16 thread. Fitment: FXST 1984-1998 UL 1937-1948 XL 1957-UP FXR 1982-1994 FLT 1979-1998 FX...

Colony - 9424-8 Cylinder Stud fits '86-'98 FXST/FLT/FLST, '91-'98 FXD, '86-'94 FXR Models Colony Cylinder Stud - Part Number 9424-8 for Evolution. Filment: FXST 1986-1998 FLT 1986-1998 FXD 1991-1998 FXR 1986-1994 FLST 1986-1998

Colony - 9635-4 Cadmium Oil Pump Check and Relief Valve Plug fits '91-'98 FXD, '84-'98 FXST, '82-'94 FXR Models Oil pump check and relief valve plug with a cadmium finish Fitment: FLT 1981-1998 FXST 1984-1998 FXR 1982-1994 FXD 1991-1998 FL...

Colony - 9645-2 Cadmium Tappet Screen Oil Plug fits '84-'98 FXST, '82-'94 FXR, '91-'98 FXD Models Tappet oil screen plug with a cadmium finish Fitment: FLT 1981-1998 FXST 1984-1998 FXR 1982-1994 FXD 1991-1998 FL 1981-1984 FLST 1986-1998 FX...

Colony - 9787-12 Zinc Oil Pump Mount Kit fits '79-'91 FLT, '82-'91 FXR, '86-'91 FLST Models Oil pump mount kit with a zinc finish. Fitment: FLT 1979-1991 FXR 1982-1991 FXD 1991-1991 FL 1978-1984 FLST 1986-1991 FXST 1984-1991 FX 1978-1984

Colony - 9819-12 Allen Type Timing Cover Screw Kit fits '93-'94 FXR, '93-'99 FXD/FXST/FLST/FLT Models Chrome timing cover allen type screw kit Fitment: FXD 1993-1999 FXST 1993-1999 FXR 1993-1994 FLST 1993-1999 FLT 1993-1999

Colony - 9821-4 Chrome Oil Filter Adapter Mount Kit fits '92-'99 FXST/FLST Models Chrome oil filter adapter mount kit Fitment: FXST 1992-1999 FLST 1992-1999

Colony - 9927-28-P Upper and Lower Engine Mount Allen Bolts fits '84-'99 FXST, '86-'99 FLST Models Polished upper and lower Allen type engine mount bolts Fitment: FXST 1984-1999 FLST 1986-1999

Colony - 9942-16 Tappet Block Bolt Set Allen fits '99-'17 FLT/FXD, '99-Up FLST/FXST Models Allen type tappet block bolt set without taper. For TC-88 engines Fitment: FLT 1999-2016 FXST 1999-UP FLST 1999-UP FXD 1999-2017

Colony - 9960-1 Chrome Oversize Allen Timing Plug fits '84-'99 FXST, '91-'99 FXD, '57-'85 Sportster Models Chrome allen timing plug is 11/16" - 16 oversize Fitment: FXST 1984-1999 FXD 1991-1999 FLST 1986-1999 FX 1971-1984 FLT 1979-1999 EL...