Vintage Parts

James Gasket - Intake Manifold Gasket Kit fits '66-'84 Shovelhead, '57-'78 Sportster Models w/ Bendix/​Keihin (Butterfly Style (OEM #27002-57)) Features: Kit contains carb-to-intake seal and two intake-to-cylinder head...

Old-STF Cycle - Brass Rocker Box Split Oil Line Features: No hassle kit for Shovelheads 1966-84. Heavy 1/4" Brass oil lines are pre bent with all necessary fittings. These lines will eliminate the problem of the "starving front head" All compression...

S&S Cycle - Stock Bore Cylinder and Stroker Piston Kit fits '66-'84 Shovelhead Engines This cylinder and piston kit can be used to create 84", 86" or 88" stroker engines, or to replace the cylinders and piston in an engine that already has an...

V-Twin - 14-0452 - Knucklehead Valve Guide Seal SetDescriptionValve guide seals for stock guides for Knucklheads.*NOTE: Sold as a set of 4. Fits:EL 1936-1940FL 1941-1947Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog...

V-Twin - 16-0875 - Tappet Oil Screen Plug Tool for 1970-1999 Big Twin Description This tool is wide slot type to remove stock slotted plug without removing exhaust pipes. Fits: FXST 1984-1998 FXR 1982-1994 FLT 1979-1998 FX 1971-1984 FXD...

V-Twin - 29-0037 - Shovelhead Upsweep Exhaust Header Set ChromeDescriptionShovelhead rigid upsweep exhaust 4 piece header set features a chrome finish. Includes a front upsweep extension header, upswwep rear exhaust header pipe, flat "squash" pipe, and a...

V-Twin - 38-6679 - Knucklehead Tank Stainless Steel Trim Set 1940-46DescriptionGas tank emblem trim set is stainless steel and is for 1940-1946 knucklehead models.Trim snaps into place as original, order mount strips and mount screws separately. Sold as...

Wyatt Gatling - Shovelhead Chrome Rocker Box Line Kit fits '79-'83 FLT, '66-'84 FL, '82-'83 FXR Models Natural brass rocker box line kit includes "T" to oil the heads with 6mm brass tube and brass fittings. Tubes feature a chrome finish over the brass...

Colony - 8224-8 Rocker Shaft End Plug fits '71-'84 Shovelhead & '71-'85 Sportster Models (OEM #17448-71A, 7875) Features: Complete sets stock-style replacement rocker shaft end plugs, nuts, and washers Made in the U.S.A...

Colony - 8302 Cadmium Complete Stock Hardware Kit fits '48-'57 Panhead Model Features: Kit includes all stock motor nuts, bolts, washers and studs All hardware meets or exceeds original H-D specifications Made in the U.S.A. Fitment 1949-1957...

Colony - Acorn Stem Nut with Shoulder fits '36-'77 Big Twin, '48-'65 Panhead, '36-'47 Knucklehead Models Features: Chrome-plated replacement stem nut for a variety of stock and custom front ends and triple trees Made in the U.S.A...

Colony - Motor Case Kit fits '70-'78 Shovelhead Model (OEM #24806-36, 24815-40) - Cadmium Features: Contain all necessary hardware to bolt together stock motor cases Made in the U.S.A. Replacement Part for...

Drag Specialties - Clutch Lever Assembly fits '73-'81 Shovelhead & '73-'81 Sportster Models - Chrome Features: Comes complete with lever bracket, lever, pivot pin and anchor pin Uses OEM replacement...

Drag Specialties - DS194024 - Lifter Block - Black - ShovelheadFeaturesCome complete with two sets of Allen cap screws (1/4"-24 for 66-E76 and 1/4"-20 for L76-84), completely machined and ready for installationMade from durable cast iron and finished in...

James Gasket - Pushrod Seal Set fits '79-'81 Shovelhead Models (O-Ring) Features: Convenient and efficient way to sell the correct amount of seals or O-rings for a rebuild or cam change James complete kits are neatly packaged for easy display Made...

Old-STF Cycle - Stainless/Black Rocker Box Split Oil Line fits '66-'84 Shovelhead The Old-STF Cycle Stainless/Black Rocker Box Split Oil Line is a high-quality kit that is designed to fit Shovelhead motorcycles from 1966 to 1984. This kit features...

S&S Cycle - Solid Lifter Conversion Kit fits '66-'84 Shovelhead Model Features: Converts stock hydraulic lifters to adjustable solids Kit includes four nonadjustable steel pushrods, four adjustable inserts and instructions Made in the U.S.A...

S&S Cycle - Standard Band Type Intake Manifold - fits L78-'84 Shovelhead (w/o VOES) Standard Band Intake Manifold - Super G - Shovelhead Compatible with S&S Super G carbs, Available for stock length cylinders, Made in the USA

S&S Cycle - Stock Bore 80" Cylinder and Standard Compression Piston Kit fits '78-'84 Shovelhead Engines This Kit is built to replace the cylinders and pistons of an 80" Shovelhead engine whilst maintaining the stock compression ratio of 8:1. It...

V-Twin - 10-0067 - 4-Finned Panhead Cam Cover CastDescriptionCast cam cover with 4-finned stock finish includes bushings and breather pipe. Cover include early pinion shaft bushing installed.Cam cover accepts 1/4"-24 generator screws. Cam cover bushings...

V-Twin - 10-0627 - Cam Chest Assembly Kit Panhead-ShovelheadDescriptionV-Twin Motor Shop cam chest assembly kit includes internal Big Twin replacement type parts for years listed, including a Sifton cam.*NOTE: Includes the circuit braker drive gear with...

V-Twin - 10-1957 - Panhead Cylinder Head Set with Valves Description Cylinder heads are fully assembled with valves, springs and collars.V-Twin Motor Shop Ready Panheads with valves feature original contour castings with the added detail of the stock...

V-Twin - 11-0006 - XL Shovelhead Rocker Box Cover Set Natural CastDescriptionXL Shovelhead rocker box cover set features a natural cast aluminum construction with shot peened finish and Shovelhead shap for a retro look. Cast construction readily accepts...

V-Twin - 11-0860 - Polished Shovelhead Top End KitDescriptionTop end kit includes pre fitted 74" cylinder set with 8.5:1 pistons, heads, polished rocker boxes, cylinder base nuts, rocker box studs, nuts and top end gasket kit.Kit includes fully assembled...

V-Twin - 11-0862 - Polished Shovelhead Top End KitDescriptionTop end kit includes pre fitted 80" cylinder set with 8:1 pistons, heads, polished rocker boxes, cylinder base nuts, rocker box studs, nuts and top end gasket kit.Kit includes fully assembled...

V-Twin - 12-0856 - Knucklehead Oil Pump Governor RotorDescriptionOil pump centrifugal valve is precision ground for fit and features an oiled finish. Designed to be driven by the scavenger oil pump idler gear.Centrifugal valve bypasses oil at low and...

V-Twin - 15-0492 - Panhead and Shovelhead Cam Cover Gasket KitDescriptionPanhead gasket kit for cam cover, tappet base and distributor. Fits:FL 1948-1969Additional Information UOM1 - KIT ManufacturerGary Bang OriginImported 2025 Catalog Pages496 ...

V-Twin - 15-1544 - Panhead Cover inchD inch Gasket SetDescriptionPaper Panhead valve cover gasket set features .062" thick composite. Fits:FL 1948-1965Additional Information OEM No.17541-48A UOM1 - SET ManufacturerGary Bang OriginImported 2025...

V-Twin - 29-0076 - Shovelhead Upsweep Header Pipe Set ChromeDescriptionShovelhead front and rear upsweep header pipe set featrues a chrome finish and will accept straight fishtail extensions or mufflers.2 piece header set is for rigid frame installation...

V-Twin - 30-0880 - Replica Knucklehead Muffler BlackDescriptionReplica black muffler features a spot seam welded body construction with formed ends.The muffler body has a diameter of 3-1/4" with a 1-3/4" diameter inlet. The overall length is 27-1/4"...

V-Twin - 32-1786 - V-Fire Retro Panhead Distributor AssemblyDescriptionV-Fire Big Twin retro distributor features the original look with updated top, fitted with "V-Fire" points and condensor installed under the top. Body and band are zinc and the top...

V-Twin - 35-0445 - Brass Knucklehead Carburetor Throttle LeverDescriptionKnucklehead throttle lever material is cast brass. Clamping and idle adjustment screws are included.Lever features one hole for cable block location. Fits:FL 1940-1947Additional...

V-Twin - 38-0543 - 1966 Fat Bob Gas Tank Set 5.0 GallonDescriptionGas tank set with right side forward petcock fitting has a fuel capacity of 5.0 gallons. 3/8 NPT fitting was for 1966 specifically, but will mount to all 1947-1984 FLH.Petcock hole is 3/8"...

V-Twin - 48-0048 - Flatside Shovelhead Engine Plaque SignDescriptionV-Twin engine plaque sign is metal and measures 18" X 24". Fits:AllAdditional Information UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages408

V-Twin - 48-0306 - Spare Parts Book for 1954-1965 XL Description Spare parts book for 1954-1965 XL provides OEM numbers to help identify exact parts required for application and range of fitment. **NOTE Product May Not Be Returned. Fits: XL...

V-Twin - 48-0323 - 1936-1947 Knucklehead and 1937-1948 UL Parts BookDescriptionSpare parts book for 1936-1947 Knucklehead and Flathead provides OEM numbers to help identify exact parts required for application and range of fitment.**NOTE Product May Not...

V-Twin - 48-1516 - Large Knucklehead Motor ModelDescriptionLarge 1:6 scale knucklehead motor model with authenthic details, including exhaust header set! This pewter model is fully assembled on a wooden display base.*NOTE: Pewter type metal...

V-Twin - 48-1718 - 1959-1969 FL Factory Service Manual Description Factory style service manual includes detailed Linkert repair and cross reference of old to new numbers for Knucklehead models. Detailed service manual is also for FLH models including...

V-Twin - 7506-4 - Solid Shovelhead Pushrod SetDescriptionSolid shovelhead pushrod set is alloy construction with hardened steel ends tips.For use with solid tappets with build in adjusters and lock nuts tappets. The length of the pushrods: 3 at 9-3/8"...

Andrews - 212020 - Cam - J Grind - ShovelheadFeaturesMore mid-range and top-end power for street and drag bikes. These cams work with solid or hydraulic lifters, and the idle remains unaffected up to 6,000 rpm with stock valve springsCams are computer...