Electra Glide FLFB

Chrome alternator bolts on in place of original 12 volt generator. Includes chrome solid state regulator, gear, gasket and mount screw set.Features high power output, 17 amps @ 1000 rpm. *NOTE: On...

Starter solenoid kit includes a zinc solenoid, plunger assembly kit and an end cover boot. Fits:FL 1965-1984FXST 1987-1988Additional Information UOM

Big Twin coil mount with swtich bracket mounts bolts on to existing studs on FL and FX frames but does not accept cover. Mount features a raw finish.Bracket does not accept coil cover. *NOTE: Must...

York electric starter kit. Fits:FL 1958-1984Additional Information UOM1 - KIT ManufacturerV-Twin

Magneto retard lever set for Burkhardt magnetos. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information UOM1 - SET <

2020 new production replica dimmer switch with cloth covered wires.Switch may be painted if desired. Fits:UL 1937-1948VL 1930-1934FL 1941-1971EL 1936-1940WL 1929-1952J 1926-1929Additional Information

V-Fire completed electronic distributor assembly includes the reverse distributer drive gear conversion to convert to the reverse rotation.*NOTE: Distributor includes internals that require reverse...

V-Fire distributor assembly includes top cover, clip, shaft assembly with reverse tooth gear installed and sensor cup.Distributor is designed for a late model electric ignition and uses a reverse...

Dimmer switch rebuild kit replaces the inter components of the switch.Includes a dimmer switch lever, brass plate backlite insulator, contact base, brass contact, rivets and spring. Fits:UL...

Headlamp socket wire includes cloth covered wires and correct bulb 3-prong connector plug. Fits:FL 1960-1969Additional Information OEM No.67753-60

Magneto top cover features a red finish and comes with a key. Fits:FX 1971-1980FL 1955-1980Additional Information UOM1 - EA

Wiring harness kit features cotton braided wire and asphalt loom. Wiring kit fits early Big Twin models.Order handlebar and tail lamp wires separately. Fits:FLH 1965-1969FL 1965-1969Additional...

Directional switch is a three position type with three cloth covered wires. Includes one each of green, red, and black wires and chrome plated housing.Switch features bottom exit wires, and stainless...

V-Fire Big Twin auto advance distributor assembly features a chrome plated base, body and top. Distributor is completely assembled with gear and all internal parts.Includes updated auto advance...

Starter is 1.4kW unit that generates more power and shaft speed than the original type 0.8kW starter.Starter includes housing to mount to 1965-1978 Big Twin. Unit is Presolite high output type...

Regulator ground wire is battery box to ground type. Fits:FL 1965-1969Additional Information OEM No.70165-58 U

Zinc plated clamp is for automatic advance distributors. This is a single stud mount clamp for flanged mounts. Fits:FL 1966-1969Additional Information OEM No.

V-Fire completed electronic distributor assembly includes distributor body and shaft with reverse tooth gear, single fire electronic ignition unit, sensor cup, wire and hold down clamp.Distributor...

Auxiliary seat spring frame cross stud with spacer. Fits:FL 1958-1984Additional Information OEM No.52605-65 UO

Auxiliary zinc seat spring kit with chrome springs, brackets, nut set, and buddy seat spring bar.Kit adapts to all plunger mounted buddy seats for extra weight capacity. Fits:FL 1965-1984Additional...

Auxiliary seat spring yokesSold in a quantity of 2. Fits:FL 1965-1984Additional Information OEM No.52596-65

Auxiliary seat spring bracket catch set.Sold in a quantity of 2. Fits:FL 1965-1984Additional Information OEM No.52586-68

Auxiliary buddy seat spring bar. Fits:FL 1965-1984Additional Information OEM No.52566-65 UOM1 - EA

Auxiliary spring buddy seat bracket set. Fits:FL 1965-1984Additional Information OEM No.52583-68 UOM1

Chrome 9" rear mount bar for rear turn signals.The distance between the mounting holes measures 5-3/16" center to center. Fits:FL 1963-1973Additional Information

Zinc plated carburetor upper and lower support bracket with hardware kit is for fitting a CV carburetor to a 1948-1985 Big Twin motor. Kit is used to mount motor case bolt between cylinders.This 2...

Exhaust clamp kit is for two into one single exhaust. Front pipe clamp set has parkerized finish and muffler hanger clamp and inlet clamp have brushed stainless finish.Order bolt seats separately...

Exhaust clamp kit is for two into one single exhaust. Front pipe clamp set is chrome plated and muffler hanger clamp and inlet clamp are brushed stainless finish.Order bolt sets separately. Fits:FL...

Black seat bracket kit includes seat bracket, right and left bracket. Fits:FXE 1966-1984FLH 1958-1984FXR 1982-1983FX 1966-1984FL 1958-1984FX 1980-1984Additional Information

Chrome top maxi engine mount has a two piece and two bolt construction for secure fastening. Fits:FX 1971-1984FL 1948-1984Additional Information UOM

Solo seat hardware kit includes nose bracket, chrome springs and rear brackets to mount small type solos.Includes a bracket and 2 thick spacers for the use on 1982-1985 FX models.The thick spacers...

Zinc front solo seat mount bracket bolts to frame holes above seat post tube. The seat nose bracket will swivel on this mount.This bracket will also mount to frames with a flat triangular plate at...

Parkerized exhaust clamp set is for front header pipe on two-into-one single exhaust.Order bolt sets separately. Fits:FL 1941-1969FL 1936-1940Additional Information

Black front frame exhaust clamp for 1936-1969. Fits:FL 1958-1969Additional Information OEM No.65512-37A UOM

Seat bracket set features a black finish and includes a zinc clip. Fits:G 1951-1973FL 1965-1967FL 1968-1984Additional Information UOM1

Zinc plated air cleaner mount bracket. Fits:FL 1966-1972Additional Information OEM No.29027-66 UOM1 -

Black oxide buddy seat spring mount right and left set includes clips to secure bolts in place.Right and left set with slots to accept pins on spring ends when in down position. Fits:FL...

Carburetor support with a zinc finish is for use on OKO and S&S "E" carburetors.For Big Twin models, mounts to center case bolt and carburetor to manifold bolt. Fits:FLST 1985-1999FX 1971-1984FL...

Carburetor support bracket is natural aluminum and measures 5-5/8" center to center. Bracket is used for Shovelhead and EVO applications. Fits:FX 1973-1984FL 1966-1984Additional Information

Steel exhaust repair port is to be welded on broken or damaged heads. Pipe flange is steel and is to repair shovel pipe ends.Sold in a quantity of 2. Fits:FX 1971-1984FL 1966-1984Additional...