Electra Glide Fat Bob FLHB

Old-STF Cycle - Carb Support Bracket fits '66-'84 Shovelhead Features: Carburetor/intake support bracket for S&S carbs.  Requires a through case bolt.  Contrast cut 6061-T6 Aluminum Supports...

Drag Specialties - Complete Three- and Five- Stud Clutch Hubs fits '36-'E84 Big Twin Models These Stud Clutch Hubs are available with three or five studs; both options come complete with all of the...

Old-STF Cycle - Brass Rocker Box Split Oil Line Features: No hassle kit for Shovelheads 1966-84. Heavy 1/4" Brass oil lines are pre bent with all necessary fittings. These lines will eliminate...

Paughco Muffler Support Bracket Fits Harley 58-84 FX, FL Models This muffler support bracket is a direct replacement for stock support bracket. Features: Heavy-duty, heli-arc constructed...

All Balls Racing - Swing Arm Bearing Kit fits '58-'85 Harley Big Twin Models (Except Softail) Features Contains all of the bearings, shafts, seals, and bushings required to build a swing arm to...

Belt Drives Ltd. - Kevlar Clutch Kit fits:'68 - 'E84 Big Twins Clutch plates are made of 6061-T6 or high tempered steel with Belt Drives Ltd. race proven kevlar material. Each plate design was...

Available for 12V applications in a black finish Updated end plate has an extra set of mounting holes to align the fins on the regulator with the fins on the engine If you have purchased a...

V-Twin - Black 7" LED Headlamp Unit W/ Turn Signal fits '94-'13 Touring Models This unit comes with an LED turn signal ring. NOTES: Requires 31-0080 mounting bracket for installation on 1999-2013 FLT...

Drag Specialties - Clutch Shell fits '70-'E84 Big Twin Chain-Drive Models  Sold each. Replaces OEM#37702-70A. Features Replacement clutch shell with starter ring gear Fitment

Drag Specialties - Pressure Plate Fits '41-'E84 Big Twin Models Sold each. Features Stamped steel construction Designed for use with five-stud clutch hubs Fitment

Spyke Supertorque Starters Looking for superior cranking torque? Starters from Spyke are exactly what you need. Requiring only a small amp draw, there's no need to buy a high-amp battery. Available...

The HardDrive starter clutch is a durable, high quality clutch. Developed using special metals, high tempature springs, and special hardness coated cam and rollers. Clutches come with heavy duty...

Chrome transmission mount kit. Fits: FL 1965-1976 FX 1971-1976

The Gasbox Voltage Regulator Mount: Stainless Steel 6 x 6 x 1 Made in the USA   Fitment: Fitment

Drag Specialties - High Performance Pressure Plate Fits '41-'E84 Big Twin Models Features Highly polished aluminum pressure plate will not warp or flex Allows smooth, positive clutch action

Old-STF Cycle - Stainless/Black Rocker Box Split Oil Line fits '66-'84 Shovelhead The Old-STF Cycle Stainless/Black Rocker Box Split Oil Line is a high-quality kit that is designed to fit S

HardDrive - 4-Speed Shocks 13.5" - fits '58-'72 FL, '54-'74 XL Features Replacement shocks for FL and XL models Chrome finish Available w/ short cover or full cover 13...

V-Factor Billet Forward Control Kit — Chrome, 3" Extended Fits: 1936-1999 Harley-Davidson Big Twin 4-speed and 1984-1999 Softail. Also fits most aftermarket frames. A complete chrome billet forward...

V-Factor Billet Forward Control Kit — Chrome, Standard Length Fits: 1936-1999 Harley-Davidson Big Twin 4-speed and 1984-1999 Softail. Also fits most aftermarket frames. A complete chrome billet...

Mid-USA Billet Forward Controls — Polished Fits: 1936-1999 Harley-Davidson Big Twin 4-speed and 1984-1999 Softail, stock length. Also fits most aftermarket rigid and Softail-style frames built to...

Mid-USA Billet Forward Controls — Black Fits: 1936-1999 Harley-Davidson Big Twin 4-speed and 1984-1999 Softail, stock length. Also fits most aftermarket rigid and Softail-style frames built to that...

Mid-USA Billet Forward Controls with MX-Style Pegs — Black Fits: 1936-1999 Harley-Davidson Big Twin 4-speed and 1984-1999 Softail, stock length. Also fits most aftermarket rigid and Softail-style...

V-Twin - 17-2838 - F-ck Unbreakable Straight Kick Starter Arm Kit Stainless Steel - Fits 1954-1984 FL, 1973-1984 FXDescriptionKit includes a straight solid stainless steel kick starter arm, with a...

Fire Power - CHD4-12 - Battery W/Acid Chd4-12 12VFeaturesGlobal Trade Item Number: 191361093203Meets or exceeds OEM specificationsExtremely strong polypropylene cases to withstand impacts and...

White FRP saddlebag set includes left and right side. Set includes tops, latches, keys and brackets for mounting.Order spacer set to fit saddlebags with luggage rack. The process of injection created...

Black saddlebag set includes correct latch assembly, keys and hinge.Set includes zinc plated brackets, which mounts to FLH rear fender strut, V-Twin #50-1072. Fits: FLH 1963-1969 Additional...

Rear saddlebag cross mount bracket for fiberglass saddlebags features a zinc finish.*NOTE: Must order hardware separately. Fits: FL 1963-1984 Additional Information

Saddlebag bracket set is for bubble bags.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.

Black FRP saddlebag set includes left and right side, tops, latches, keys and brackets for mounting. Spacer set to fit saddlebags with luggage rack is sold separately.Mount hardware not included...

Rear saddlebag cross mount bracket for fiberglass saddlebags features a chrome finish.The distance center to centere measures 13-3/8". *NOTE: Must order hardware separately. Fits: FL...

Chrome rocker clutch pedal. Fits: FL 1941-1978 Foot Clutch Additional Information OEM No. 36811-65

Luggage rack pad clamp set has quick release springs to fit 3 channel stock luggage racks.Order pad kit separately. rack is designed for loads of 10 pounds or less. Fits: EL 1936-1940 FL...

Chrome saddlebag guard includes right and left side to help protect fiberglass bags. Fits: FLH 1968-1977 FL 1968-1977 Additional Information

Black Magic Royalite saddlebag set includes latches with built in lock. Original Buco "Black Magic" style in royalite material was developed in the early 1950s by Uni Royal Rubber Co.Original Buco...

Replica white saddlebag set includes latches with built in lock.Set does not include bracket.

Black Magic Royalite saddlebag kit with brackets. Original Buco "Black Magic" style in royalite material was developed in the early 1950s by UniRoyal Rubber co. Kit includes locks , chrome band,...

Replica white bubble saddlebag kit with brackets for swingarm Big Twin models. Kit includes locks, chrome band, lids and inner chain. Fits: FL 1958-1984 Additional Information

Zinc plated saddlebag mounts for stock or Bertha saddlebags. Includes both right and left sides.To allow for alignment and adjustment, mount holes are slotted and are 3/4" diameter. The mount holes...

V-Twin - 49-2051 - Replica Saddlebag Set BlackDescriptionSaddlebag set comes without brackets. Set includes two side bags, tops latches and keys.Saddlebag is constructed of fiber reinforced plastic. ...

V-Twin - 49-2050 - Replica White Saddlebag SetDescriptionReplica saddlebag set without brackets features a plain white finish. Set includes two side bags, tops latches and keys.Saddlebag is...