Electra Glide FLB

Solid steel frame dowel set is for the installation of hardtails.Outer diameter on small end is .7225 and large end is .8375. *NOTE: Must be welded in place. Fits:FL 1958-1984Additional Information

Swingarm rear fender hinge features a raw finish. Hinge includes both halves with pin but without wire loom tail.Hinge halves are produced with correct pin and hinge offset for installing on original...

Raw steel wire loom fender strip for inside of the left FL rear hinged fender, radiused to fit the fender contour, and segmented to accept tail lamp wires.Must be spot welded to the left side or...

Wire loom spring clamp features a raw finish and is for use with the rear fender. To hold spring loom cover in place use #32-2036. Clamp is sold in a pack of 5.*NOTE: Must be spot welded on. Fits:FL...

FL fender strut set features a chrome finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. The distance from the...

FL fender strut set features a black finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. *NOTE: Requires 7-1/4"...

V-Twin - 50-1148 - Zinc Plated Fender BracketDescriptionZinc plated steel bracket used to adapt one piece FXDF front fenders to fit FLH forks on 1949-up 41mm models.Set of two. Bracket is formed from...

Front fender trim kit includes chrome front fender tip and front fender trim side rails for FL models. Fits:FL 1967-1972Additional Information UOM1 - SET

2022 New Production Replica rear fender is flip style with updated hinged tail.Fender will accept 1955-1972 type tail light. We suggest pre fitting the fender prior to painting. Before priming or...

Chrome rear fender strut set is of solid steel construction and is for use with Bobbed fender only. Fits:FX 1973-1984FL 1958-1984Additional Information U

V-Twin - 10-0003 - S&S Stock Bore Shovelhead Engine Crankcase SetDescriptionCrankcase set comes ready to assemble.S&S Crankcase Sets are shipped set-up with Timken left side bearing and race...

Drag Specialties - 21130216 - Battery Kit - CHD4-12FeaturesMSDS Migration DataDrag Specialties Conventional batteries are built to the same exacting specifications and quality-control standards as...

Replica Wagner style rear master cylinder for drum brake. The cast iron body is painted silver with a natural aluminum top. Master cylinder is 3/4 inch bore. NOTE: Wagner Lockheed replacement not...

V-Twin - SMC Electric Start Oil Tank fits '58-'64 FL, '71-'85 FX Models Swingarm York oil tank features a chrome finish. Oil tank is for use on 4-speed models with a stock swingarm frame. tncludes...

V-Twin - Nickel Plated Tappet Block Screw Kit fits '48-'84 FL Model Tappet base bolt set of eight with 1/4" x 20UNC thread, is nickel plated, and has a hex shaped head. Screw does not have taper and...

3 speed and reverse chrome left side tank hand shifter gate, has a 32N1R front to rear shift pattern. The distance center to center of the screw holes is 3.5". Note: Use 1/4"-28 x 1/2" hex head...

Zinc plated shift gate hex screws is 1/4"-28 x 1/2", National Coarse. Sold in a pack of 5. Fitment: G 1947-1973 FL 1947-1965

Swingarm frame oil tank rear mount bracket with spacers features bright zinc plating. Fitment: FL 1958-1984

V-Twin - Footboard Tabs fits '41-'84 FL, '36-'40 EL/UL Models Forged steel footboard tabs for 1" frame tubes. Fitment: EL 1936-1940 FL 1941-1984 UL 1936-1940

Colony - 8140-34 Chrome Stock Engine Case Bolt Kit fits '70-'78 FL, '71-'78 FX Models Engine case kit includes all the necessary hardware to bolt together engine cases. Fitment: FX 1971-1978 FL...

Colony - 9018-5 Tank Hand Shifter Lever Stud fits '36-'48 UL, '36-'40 EL, '41-'84 FL Models (OEM #33775-37) - Chrome Chrome Tank Hand Shifter Lever Stud Fitment: UL 1936-1948 EL 1936-1940 FL...

Colony - 9103-4 Shoulder Bolt fits '36-'48 UL, '36-'40 EL, '41-'84 FL Models (OEM #33879-36) - Chrome Chrome shoulder bolt. Fitment: UL 1936-1948 EL 1936-1940 FL 1941-1984

Colony - 9523-1 Chrome Oil Pump Check Valve Plug fits '36-'40 EL, '41-'80 FL Models (OEM #26362-36) Chrome oil pump check valve plug Fitment: EL 1936-1940 FL 1941-1980

Colony - 9524-1 Cadmium Oil Pump Valve Plug fits '36-'40 EL, '41-'80 FL Models (OEM #26362-36) Oil pump check valve plug with a cadmium finish Fitment: EL 1936-1940 FL 1941-1980

Colony - 9525-1 Parkerized Oil Pump Check Valve Plug fits '36-'40 EL, '41-'80 FL Models (OEM #26362-36) Oil pump check valve plug with a parkerized finish Fitment: EL 1936-1940 FL 1941-1980

Colony - 9629-2 Parkerized Rear Chain Adjuster fits '41-'72 FL, '37-'48 UL, '36-'40 EL Models Rear chain adjuster with a parkerized finish. Chain adjuster features a 3/8 - 24 thread with a hex...

Colony - 9638-30 Rear Fender Strut Acorn Type Bolt Kit fits '58-'80 FL Model Rear fender strut chrome acorn type bolt kit replaces origin al hardware for FLH models Fitment: FL 1958-1980

Colony - 9652-1 Speedometer Cable Clamp fits '61-'80 FL Model (OEM #67074-57A) Speedometer Cable Clamp Fitment: FL 1961-1980

Colony - 9671-20 Parkerized Transmission Side Cover Kit fits '37-'48 UL, '71-'84 FX, '36-'40 EL Models Parkerized hex stock style kit includes nuts and washers for the transmission side cover and...

Colony - 9691-2 Seat Post Rod Lock Nut and Lock Washer fits '37-'48 UL, '41-'81 FL, '36-'40 EL Models (OEM #51674-25) Parkerized seat post rod lock nut and lock washer Fitment: UL 1937-1948 VL...

Colony - 9696-18 Parkerized Seat T Mount Kit fits '37-'48 UL, '36-'40 EL, '41-'84 FL Models Seat T mount kit has a parkerized finish and includes bolt, washers, spacers and nuts to mount stock type...

Colony - 9706-4 Parkerized Tank Hand Shifter Rod End Bolt Kit fits '36-'48 UL, '36-'40 EL, '41-'84 FL Models (OEM #33879-36) Tank hand shifter rod end bolt kit has a parkerized...

Colony - 3560-2 Lower Front Mount Tie Rod Ball Joint Screw Set fits '37-'48 UL, '36-'40 EL, '41-'84 FL Models (OEM #6041-20) Lower front mount tie rod ball joint screw set. Sold as a...

Colony - 3574-1 Gas Tank Rubber Divider fits '39-'79 FL, '39-'79 FLT Models (OEM #3503-39) Gas tank rubber divider Fitment: FL 1939-1979 FLT 1939-1979

Colony - 9717-1 Parkerized Kick Starter Spring Stud fits '37-'48 UL, '71-'84 FX, '36-'40 EL Models (OEM #33090-36) Kick starter spring stud with a parkerized finish Fitment: UL 1937-1948 FX...

Colony - 9719-1 Parkerized Transmission Fill Plug fits '71-'73 FX, '41-'73 FL Models Parkerized transmission fill plug for side valve models. Fitment: FX 1971-1973 FL 1941-1973

Colony - 9732-7 Foot Brake Lever and Bracket Mount Kit fits '41-'71 FL, '36-'40 EL Models Foot brake lever and bracket mount kit with a chrome finish Fitment: FL 1941-1971 EL 1936-1940

Colony - 9733-7 Foot Brake Lever and Bracket Mount Kit fits '41-'71 FL, '36-'40 EL Models Foot brake lever and bracket mount kit with a cadmium finish. Fitment: FL 1941-1971 EL 1936-1940

Colony - 9734-7 Foot Brake Lever and Bracket Mount Kit fits '41-'71 FL, '36-'40 EL Models Foot brake lever and bracket mount kit with a parkerized finish Fitment: FL 1941-1971 EL 1936-1940

V-Twin - Black Battery Top Cover fits '65-'84 FL Model (OEM #66370-65) Battery top cover features a black finish Fitment: FL 1965-1984