Electra Glide FLHB

Spring Fork handlebar throttle spiral is push type.*NOTE: Spiral uses 1-1/8" inner diameter grips on both sides. Fits:K 1952-1956FX 1971-1972XL 1954-1970FL 1954-1970Additional Information

Rear connector stud without bushing.Shaft diameter: 3/4" for a 1/2" then steps down to 5/8" for 1-11/16". Fits:FL 1958-1972Additional Information OEM No.

Replica chrome handlebar cross bar kit with clamps, for 1" Spring Fork or early glide handlebars. Fits:FL 1941-1972WL 1939-1952UL 1937-1948EL 1936-1940Additional Information

Black rocker clutch pedal for 1968-1978 FL police models with tank shift. The end of the operating shaft has machined flats to accept the foot clutch rod lever. Fits:FL 1965-1978 Foot...

Chrome foot clutch rod lever. Fits:FL 1965-1984Additional Information OEM No.36816-65A UOM1 - EA

Shovelhead manual set includes a FL and FX service manual, 2 different spare parts books and a complimentary copy of the V-Twin product guide. Fits:FL 1966-1980Additional Information

V-Twin - 48-1382 - Spare Parts Book for 1961-1971 Big Twins Description Spare parts book for 1961-1971 Big Twin provides OEM numbers to help identify exact parts required for application and range...

Black windshield pouch, with silver edge trim.Mounts to stock 1949-1984 windshields. Fits:FL 1949-1984Additional Information UOM1 - EA <

White windshield pouch, with silver edge trim. Fits:FL 1960-1984Additional Information OEM No.58275-63 UOM

Black windshield pouch, with gold edge trim. Fits:FL 1960-1984Additional Information UOM1 - EA Manufacturer

White windshield pouch, with gold edge trim. Fits:FL 1960-1984Additional Information OEM No.58275-63 UOM<

V-Twin - Black Buddy Seat Base Plate Bare fits '41-'80 FL Model Bare black metal buddy seat base plate features 8" sew on strips installed. Fitment: FL 1941-1980  

V-Twin - White Leather Solo Seat with Skirt fits '41-'84 FL, '36-'40 EL Models White deluxe solo seat features white skirt, black rosettes and nickel spots. A molded foam pad on an accurate steel...

Black naugahyde covered buddy seat with features a thin profile with a formed steel baseplate.Fastened by pop rivets. Use with a seat tee. Skirt rail not included. *NOTE: Must order mount hardware...

Bates style solo seat kit includes a genuine Bates style tuck and roll leather solo seat and all mount hardware for installation on 1965-1984 FX-FL 4 speed models with a swingarm frame.*Note: UPS may...

Black wheel hub without internals for 1967-1972 Fits:FX 1971-1972 rear onlyFL 1967-1972 front or rearAdditional Information OEM No.43540-67B

Front or rear wheel hub includes bearing, tube, seal, seal spacer, and lock nut. Fits:FX 1971-1972 rear onlyFLH 1967-1972 front or rearAdditional Information

Chrome front 8" dresser hubcap fits in between hub and axle without additional hardware Fits:FL 1967-1972Additional Information OEM No.43304-67

This standard nipple set is 22mm long and is cadmium plated.Set of 40 pieces. Fits:FL 1941-1984Additional Information UOM1 - SET

V-Twin - 44-1996 - Swingarm Pivot Pin with 1 inch Longer PinDescriptionSwingarm pivot pin is 1" longer.Order nut separately. Use with a 5/8" X 18 threads per inch nut. Fits:FX 1971-1984FL...

V-Twin - 44-1958 - Chrome Swingarm Pivot KitDescriptionChrome swingarm pivot kit includes pin, spacers, seals, bearings, races and lock. Fits:FX 1971-1972FL 1958-1972Additional Information

Black swingarm pivot kit includes pin, spacers, seals, bearings, races and lock. Fits:FX 1971-1972FL 1958-1972Additional Information UOM1 - KIT<

Chrome glide front axle kit includes 9-1/8" bearing surface length axle, spacer, nut kit, axle sleeve. Fits:FL 1967-1971 frontAdditional Information OEM No.<

Chrome rear axle kit includes 10-3/4" bearing surface length axle, nuts, sleeves and spacer.This is an 8 piece kit. ...

Wheel hub bearing left hand thread lock nut is for a 1967-1972 wheel hub.Lock nut is manufactured to meet OEM specifications for long lasting durability and performance. Lock nut has a 24 TPI an an...

Zinc rear axle kit includes 10-3/4" bearing surface length axle, nuts, sleeves and spacer.This is an 8 piece kit. ...

Chrome wheel hub retainer cover. Fits:FX 1971-1972 RearFL 1967-1972 Front or RearAdditional Information OEM No.43592-70

Front or rear wheel hub bearing kit includes 3 bearings, tube spacer, seal, left hand thread lock nut.*NOTE: For 11/16" axle diameter. Fits:FL 1967-1972 front or rearFX 1971-1972 rearAdditional...

Wheel hub bearing lock nut and seal kit include seal spacer, seals, and lock nut featuring a zinc finish.*NOTE: For 11/16" axle diameter. Fits:FX 1971-1972 RearFL 1967-1972 Front or RearAdditional...

Wheel hub bearing tube spacer fits front or rear wheel of 1967-1972 FL models.*NOTE: For 11/16" axle diameter. Fits:FL 1967-1972Additional Information OEM N

Chrome left side rear axle sleeve spacer has an overall length of 1/2". Fits:FL 1963-1972FX 1971-1972Additional Information OEM No.41596-63

Chrome rear axle spacer has an overall length of 2-1/8". Fits:FL 1967-1972FX 1971-1972Additional Information OEM No.41595-67

Rear axle sleeve Fits:FL 1968-1972 Rear FitmentFX 1971-1972 Rear FitmentAdditional Information OEM No.41600-67

Chrome rear axle nut is 5/8" x 18 with washer kit.For 3/4" axles, universal. Fits:FL 1941-1972UL 1937-1948FX 1971-1972EL 1936-1940Additional Information

Zinc left side rear axle sleeve spacer has an overall length of 1/2". Fits:FL 1963-1972FX 1971-1972Additional Information OEM No.41596-63

Chrome rear axle collar only fits 1930-1972 Big Twin. Fits:FL 1941-1972UL 1937-1948FX 1971-1972EL 1936-1940VL 1930-1936Additional Information

Front and rear wheel hub bearing tube spacer for 1967-1972 Big Twin, 1971-1972 FX rear. Fits:FX 1971-1972 rear onlyFL 1967-1972 front or rearAdditional Information

Front axle sleeve fits 1967-1971 Big Twin. Fits:FL 1967-1971Additional Information OEM No.43882-67 UOM

Replica zinc plated axle with a hex head and threaded end has a 10-3/4" bearing surface length and can be used to replace a worn out or damaged axle.May be used in the Timken hubs, may have to be...

Axle with hex head and threaded end has a 10-3/4" bearing surface length and can be used to replace a worn out or damaged axle.May be used in the Timken hubs, may have to be shortened as required...