Sportster XLCH 900 Kick Start

Tillotson intermediate carburetor adjuster screw. Fits:FL 1966-1970XL 1966-1971Additional Information OEM No.27352-66

Tillotson carburetor gasket and hardware kit includes gasket, diaphragm, idle and intermediate adjuster screw spring, throttle shaft spring, throttle lever stop screw spring, and six diaphragm cover...

Brass intake manifold clamp set is two piece type with o-ring type seals. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional Information UOM

Bendix carburetor kit includes 38mm Bendix carburetor with adjustable main jet, throttle handle with grips, cable and cable bracket, and 7" round logo air cleaner with support. Kit includes seal...

Replica alloy intake manifold is O-ring type. Fits:FX 1971-1977FL 1966-1977XL 1966-1977Additional Information OEM No.27021-71A

Dell'Orto 40mm carburetor kit includes throttle assembly, cable, grips, air cleaner adapter, and carburetor adapter to fit side Valve three bolt manifolds. Features adjustable accelerator pump and...

Chrome oval air cleaner insert features raised ribs design.Mounts with air cleaner cover screws. Fits:XLH 1966-1975FX 1971-1975XLCH 1966-1975FLH 1967-1975FL 1967-1975Additional Information

Black oval air cleaner cover.Holes are 4" apart center hole to center hole. Fits:FL 1971-1984FXST 1984-1989FX 1971-1984XL 1966-2003FLST 1986-1989FLT 1979-1989Additional Information

Air cleaner mount kit includes a air cleaner to carb gasket, 1/4"-20 x 3/4" round head Phillips screw and a 1/4" external biter washer.*NOTE: Use with Bendix Keihin butterfly carburetors. Fits:XL...

Teardrop air cleaner cover assembly is made of steel and has a smooth chrome finish. For use with Bendix and Keihin type carburetors.*NOTE: Backing plate and teardrop cover are of stamped steel...

V-Twin - 33-1955 - Chrome Tail Lamp and Bracket KitDescriptionChrome early style tail lamp with plate bracket and gasket. Fits:FL 1955-1972FX 1971-1972XL 1955-1972Additional Information

XL guide lens tail lamp assembly features a primer finish with the internals, a 6 volt bulb, a plastic top license plate lens and a guide glass lens for detail. Fits:FL 1955-1972XL...

Replica primer tail lamp includes A 12 volt 23/8 watt clear bulb, lens housing, plastic red lens and internals.A replica red galss lens in included, but uninstalled. *NOTE: Order gasket separately...

Original style chrome 12 volt tail lamp includes additional plastic lens with blue dot installed. Fits:FL 1955-1972XL 1957-1972Additional Information UOM

V-Twin - 33-0838 - Chrome 1955 Style Tail Lamp KitDescriptionChrome 1955 style tail lamp kit includes plastic lens, mount gasket and additioinal lens with blue dot.Installed for custom installation...

Replica black 5-3/4" stock style headlamp includes 12 volt sealed beam and has two studs on the back for wiring.*NOTE: For show or decorative use only and are not D.O.T. approved. Fits:XL 1954-1973FX...

Replica chrome 5-3/4" stock style headlamp includes 12 volt sealed beam and has two studs on the back for wiring.*NOTE: For show or decorative use only and are not D.O.T. approved. Fits:XL...

Tail lamp wiring features PVC covered wires. Fits:XL 1970-1972FX 1971-1972FL 1970-1972Additional Information UOM1 - EA <

Wiring harness kit features plastic covered wires. Builders kit harness includes main harness, handlebar, tail lamp and starter wires. Wiring harness fits XLCH kick starter models. Fits:XLCH...

Prestolite starter motor repair kit includes thru bolts. Fits:FL 1966-1981XL 1967-1973XL 1977-1980GE 1966-1973Additional Information UO

Stainless steel base ignition advance unit without cam is heat treated weights for 1970-up mechanical advance ignitions.Ignition Circuit Breaker Cam OEM #32542-70A and bolt or washers are not...

V-Twin - 32-2079 - XLCH Burkhardt Magneto AssemblyDescriptionBurkhardt Magneto assembly. Fits:G 1941-1973XLCH 1957-1970W 1941-1952Additional Information

Magneto advance arm with magnet.The magnet is used to hold the arm in position by adhering to the points cover screw. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information

Magneto advance post for advance arm kit. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information UOM1 - EA

Weed wacker coil for Dave Hale. Fits:XL 1970-1980Additional Information UOM1 - EA ManufacturerV-Twin<

XLCH Magneto advance assembly includes all necessary pieces to have a cable operated advance on XL-WL magnetos. Fits:XL 1957-1970Additional Information UOM

Burkhard magneto retard kit includes a clear top, gasket, ignition points and condenser kit and arm with mount pin for installation.This kit is for right hand (clockwise) rotation magnetos, XLCH...

Starter installation screw kit is for electric start conversion kits by V-Twin. Fits:XL 1967-1979Additional Information UOM1 - KIT

XL 12 volt alternator gear kit includes gear, nut, spacer and deflector washer. Kit is for 32E 12 volt style alternator.Accepts 1/4 or 5/16 mount screws. Fits:XL 1958-1983Additional Information

Early 3 way key switch features a die cast body with the off/on/on positions, and includes 2 small early style brass Chicago style brass keys, for XLCH applications.Threaded body has a 3/4" outer...

Chrome alternator bolts on in place of original 12 volt generator. Chome state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the rotor...

Black alternator bolts on in place of original 12 volt generator. Black solid state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the...

Magneto retard lever set for Burkhardt magnetos. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information UOM1 - SET <

This V-Fire Tuneable Ignition Advance Assembly includes a st ainless advance base, points plate with "Blue Streak" points , and condenser with hardware.Three pairs of color coated springs are also...

Starter is 1.4kW unit that generates more power and shaft speed than the original type 0.8kW starter.Starter includes housing to mount to 1965-1978 Big Twin. Unit is Presolite high output type...

V-Fire ignition advance unit features stainless steel base, heat treated weights, and cam center screw for 1970-up mechanical advance ignition. Fits:FX 1971-1978FL 1970-1978XL 1970-1978Additional...

Relay to ground wire. Fits:XL 1970-1980FXE 1971-1978Additional Information OEM No.70169-70 UOM

Steel fork boot retainer washer for XL models.Sold in a quantity of 2. Fits:XL 1957-1970Additional Information OEM No.46010-54

Zinc horn bracket for left side Fits:XL 1952-1984Additional Information OEM No.69031-57 UOM1 - EA

Includes seat plunger kit, seat "T", and pivot bolt. Fits:XL 1954-1970Additional Information UOM1 - KIT Manufa