Electra Glide FLHF

Chrome fork slider cover set is stock length 6-5/8". Mount holes measure 1/4"x 28 thread.Sold as a pair. Use 1/4"-28 x 5/8" allen socket cap. Fits:FLH 1949-1984Additional Information <

Zinc fork stem nutThread is 1"-24. Fits:FXST 1984-1999FL 1960-1984FLST 1986-1999FX 1980-1986Additional Information OEM No.

Fork tube caps chrome are vented.Sold as a pair. Fits:FL 1949-1976Additional Information OEM No.45729-49

Fork steering damper plate with tab Fits:FLH 1949-1984Additional Information OEM No.46730-48 UOM1 - E

Fork steering damper plate with hole Fits:FLH 1949-1984Additional Information OEM No.46718-48 UOM1 -

Operating brake lever for front right side. Fits:FL 1969-1972Additional Information OEM No.44490-69A UOM<

Chrome 41mm taper top socket fork caps for FLH models.Sold as a pair. Fits:FL 1949-1976Additional Information UOM1 - SET

Fork slider weld on tabs are to restore FLH Glide legs to accept fenders.Must be welded on to stock or turned down legs. Fits:FLH 1949-1984Additional Information

Inner fork tube plug set is chrome.Sold as a pair. Fits:FL 1949-1976Additional Information OEM No.45776-49

Kit includes front cable tube, adjuster and adjuster screw. Fits:FL 1950-1971Additional Information OEM No.45202-50

Kit features polished lever, front brake cable, adjuster, front brake tube and fitting to install the brake cable on glide forks. Fits:FL 1965-1971Additional Information

Kit includes matching top filler cap plugs.Sold as a pair. Fits:FL 1949-1976Additional Information UOM1 - SET

Kit includes damper tubes with rings, screws, and washers, lower stops, slider seal washers and retaining rings for both sides. Fits:FL 1949-1976Additional Information

Fork damper tube set is without hardware.Sold as a pair. Fits:FL 1949-1976Additional Information OEM No.46100-48

Lower fork slider bushing set includes 2 long with a oil groove inside and 2 short bushings.1.625" inside diameter must be honed after installation. We recommend that a qualified machine shop install...

Brake cable tube fitting seat for the Glide drum front left side. Fits:FL 1949-1972Additional Information OEM No.45207-49

Kit comes with all parts necessary to thread into slider tube plug. Kit is for 2 sides.Sold as a pair. Fits:FL 1949-1976G 1949-1976Additional Information

Lower fork damper tube bushing for FLH models.Sold as a pair. Fits:FL 1949-1976Additional Information OEM No.46121-48

Locating washer for backing plate pivot stud.Sold in a quantity of five. Fits:FL 1949-1971Additional Information OEM No.44454-48

Brake backing plate pivot stud with locating washer. Fits:FL 1949-1971G 1958-1971Additional Information OEM No.44448-48

Chrome fork neck cup set with races installed.Includes bearings. Must order dust shields separately. Sold as a pair. Fits:FL 1960-1984Additional Information

Kit includes neck cup bearing, dust cover set, cone cover nut, stem nut and lock washer kit. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information

Zinc fork neck cup set with races installed. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information OEM No.48311-60

Chrome fork neck cup set with races installed.Sold as a pair. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information OEM No.

V-Twin - 24-0117 - Upper and Lower Zinc Dust ShieldsDescriptionSet includes both an upper and lower dust shields. Each shield is zinc and is for use with Timken style bearings.Sold as a pair...

V-Twin - 24-0114 - Upper and Lower Chrome Dust ShieldsDescriptionChrome upper and lower triple tree dust shield set is for use on Big Twin models with Timken style bearings.The lower cover is the...

Chrome hex type cone cover nut features cover with built in nut. Fits:FL 1949-1979Additional Information OEM No.48330-48

V-Twin - 24-0112 - Lower Triple Tree Zinc Dust ShieldDescriptionZinc lower dust shields have an inner diameter of 51mm for fork neck cup kit. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR...

Feature built in rubber seal where bearing contacts the top of the race. This kit chrome cups and dust shields. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FLH 1949-1984Additional Information

Front brake cable tube only chrome has a 5/16" x 24 thread. Fits:K 1952-1956XL 1957-1972 FrontFL 1950-1971Additional Information OEM No.

V-Twin - 24-0089 - Fork Bearing and Seal KitDescriptionFork bearing kit includes two tapered bearings and two seals. Fits:FL 1949-UPXL 1982-UPFX 1970-UPAdditional Information

Fork tube includes fork damper kit, fork spring set, fork baffle kit, chrome fork tube cap, inner fork tube plug, oil seal, and snap rings. The fork tubes are stock and are 20" long.Sold as a pair...

Raw machined steel fork tube is 20" stock length.Before installing, compare old and new tubes. Be sure the stock top plug threads fit into the new fork tubes. Sold as a pair. ...

Fork tube set is 20" stock length.Before installing, compare old and new tubes. Be sure the stock top plug threads fit into the new fork tubes. Sold as a pair. *NOTE:...

Kit includes brake shoes, springs,polished backing plate, black drum, axle sleeve, nuts, cam with lever and mount stud for right side brake.NOTE: Pivot stud hole is oversize to allow 7/16" stud with...

Kit includes brake shoes, springs, chrome backing plate, chrome drum, axle sleeve, nuts, cam with leverm and mount stud for right side brake.NOTE: Pivot stud hole is oversize to allow 7/16" stud with...

This chrome billet aluminum master cylinder with offset hole replaces Wagner style master cylinders.This master cylinder has a bore size of 5/8" and a milled body design. It is 3-1/8" tall. Uses...

Kelsey Hayes type billet master cylinder has 5/8" bore with offset mount holes.This master cylinder can be used with 10mm banjo bolt or flare fittings. Fits:FL 1958-1978FX 1971-1978Additional...

V-Twin - 23-1961 - Rear Master Cylinder Rebuild KitDescriptionRebuild kit includes the top gasket and two boots.For rebuilding disc or drum type master cylinders. Check service manual for required...

Chrome steel spacer is 3/8" x 3/4" x 3/16".This spacer is used in the rear master cylinder and also a spacer for the brake pedal stop. Spacer can also be used on banana bulleye calipers that utilizes...