Electra Glide FLH

Handlebar throttle screw kit includes plastic knob, spring and retaining ring. Fits:XL 1974-2020FL 1974-1984FX 1974-1984FXST 1984-2015FXD 1991-1997FLST 1984-2015FX 1984-1994FLT 1986-2007Additional...

Alloy peformance 1-7/8" shorty carburetor kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response.This is the R-2 version of...

Black intake manifold clamp set includes o-ring style seals and fillister screws. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional Information

Single handlebar throttle cable assembly with black grips.Includes 2 chrome end plugs for grips. Fits:FL 1974-1980FX 1974-1980XL 1974-1980Additional Information

Kit includes 38mm OKO flatslide carburetor with built in choke activator, spigot intake manifold, throttle cable, two bolt flange adapter and twist grip set.Kit includes seal adapters for use with...

Intake manifold clamp set is a two piece set with nut style clamps. Unique design will give the vintage "plumber" manifold look for later Panhead and Shovelhead models.Set includes screws, o-ring and...

Black hex petcock is forward facing and is constructed of forged brass with screen. Features 5/16" National Pipe Thread brass hose spigot. On/Off handle is black.For early style 5/16" NPT petcocks on...

Sifton chrome petcock rear facing with 3/8" National Pipe Thread. Features solid brass construction with on/off and reserve positions, screen, and a 3/8" fitting. Fits:FX 1971-1974XL 1955-1974FL...

Black petcock with right outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information

Linkert carburetor bowl lock nut has a chrome finish. The nuts are 3/4 X 20 thread. Fits:FL 1941-1984Additional Information OEM No.27375-29

Black Petcock with straight outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information

Replica cadmium intake manifold clamp set features fillister head screws. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional Information OEM No

Intake manifold clamp update kit is used to update early intakes to late style seals or when intake flanges are damaged on early heads. Kit includes manifold rings, silicone seals, and stainless...

Intake manifold adapter ring set is used to update early style O-ring intake manifolds and cylinder heads to late style flat band type seals. Set includes four standard and two stroker rings. Fits:FX...

Stainlees steel power intake clamp set features a "floating bridge." Clamps close the gap under the "T" bolt for total 360  wrap around seal. This set has O-ring seals*NOTE: Includes USA made clamps...

Intake manifold adapter rings for stroker .200 taller cylind ers are used to update early style O-ring intake manifolds a nd cylinder heads to late style flat band type seals. Fits:FX 1971-1977XL...

Intake manifold adapter rings for stock cylinders are used to update early style O-ring intake manifolds and cylinder heads to late style flat band type seals. Fits:FX 1971-1977XL 1957-1977FL...

Polished stainless steel intake manifold clamp set features clamps constructed from a strong, light weight material that is very flexible and easy to install! Includes o-ring style seals.Clamp set...

Chrome petcock with right outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information

Chrome Petcock with straight outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information

Chrome petcock wing type includes screen and 2 handles, sliding control valve with reserve. Use with 5/16" fuel line. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information

Bendix carburetor accelerator pump*NOTE: The ridged area is constructed of rubber and features a leather seat. Fits:XL 1972-1976FX 1971-1975FL 1971-1975Additional Information

Bendix carburetor rebuild kit includes accelerator pump for 38mm stock or adjustable jet carburetor. Fits:XL 1972-1976FX 1971-1975FL 1971-1975Additional Information

Brass intake manifold clamp set is two piece type with o-ring type seals. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional Information UOM

Bendix Carburetor Kit includes 38mm carburetor with adjustable main jet, throttle handle with grips, cable with bracket and 7" round air cleaner with support. Kit also includes seal adapters to use...

Replica alloy intake manifold is O-ring type. Fits:FX 1971-1977FL 1966-1977XL 1966-1977Additional Information OEM No.27021-71A

V-Twin - 35-0071 - 1 inch Twist Grip Assembly ChromeDescriptionSingle 1" cable type throttle handle assembly with Anderson type grips features chrome throttle housing.Cable not included. ...

Dell'Orto 40mm carburetor kit includes throttle assembly, cable, grips, air cleaner adapter, and carburetor adapter to fit side Valve three bolt manifolds. Features adjustable accelerator pump and...

Bendix mini oval air cleaner kit features a black finish. Kit includes filter, cover, and backing plate. The cover is for single screw mounting.Air cleaner size is 30% smaller than original OEM cover...

Bendix mini oval air cleaner kit features a chrome finish. Kit includes filter, cover, and backing plate. The cover is for single screw mounting.Air cleaner size is 30% smaller than original OEM...

Chrome oval air cleaner insert features raised ribs design.Mounts with air cleaner cover screws. Fits:XLH 1966-1975FX 1971-1975XLCH 1966-1975FLH 1967-1975FL 1967-1975Additional Information

Teardrop carburetor cover is natural cast and is made to fit linkert carburetors only.Cover features a 3 bolt hole mounting design. This is not an air cleaner. Fits:FL 1970-1984XL 1971-2006FX...

Teardrop carburetor cover is made to fit Bendix and Keihin carburetors only.Cover features a 3 bolt hole mounting design. This is not an air cleaner. *NOTE: The length of the mount screws are...

Teardrop carburetor cover is natural cast and is made to fit CV carburetors only.Cover features a 3 bolt hole mounting design. This is not an air cleaner. *NOTE: The length of the mount screws are...

Chrome OKO teardrop air cleaner assembly includes the back plate, filter and slotted cover for "easy breathing". For Bendix and Keihin butterfly carburetors.The back plate features a natural alloy...

Black OKO teardrop air cleaner assembly includes the back plate, filter and slotted cover for "easy breathing". For Bendix and Keihin butterfly carburetors.The back plate features a natural alloy...

V-Twin - 34-1687 - Black Wyatt Gatling Air Cleaner AssemblyDescriptionWyatt Gatling assembly includes round air cleaner with black mesh cover, integral breather system with bracket, and mounting kit...

Alloy air cleaner backing plate features a 3 post design to mount teardrop air cleaners.Plate is the two screw type and 160mm diameter in the round section to fit cover. Accepts Bendix-Keihin models...

Black oval air cleaner cover.Holes are 4" apart center hole to center hole. Fits:FL 1971-1984FXST 1984-1989FX 1971-1984XL 1966-2003FLST 1986-1989FLT 1979-1989Additional Information

Air cleaner mount kit includes a air cleaner to carb gasket, 1/4"-20 x 3/4" round head Phillips screw and a 1/4" external biter washer.*NOTE: Use with Bendix Keihin butterfly carburetors. Fits:XL...