Electra Glide FLH

Alloy Art - Gooden-Tite Swing Arm Bushings fits '08 & Earlier Touring and FXR Models These swing arm bushings significantly decrease motor flop and movement while still dampening vibration...

S&S Cycle - Super Stock™ '66-'78 Cylinder Heads - fits 3-5/8" Bore Cylinders Features: Heads come completely assembled with valve seats, valves, guides, seals, .590" lift valve springs, collars...

S&S Cycle - Master Rebuild Kit For S&S Oil Pump - fits '78-'91 Harley Big Twin Features: Master rebuild kit for S&S oil pump. Made in the U

Hard Drive - Shovelhead Exhaust Stud Conversion Kit fits '66-'84 Shovelhead Model Features This kit helps prevent thread stripping in the cylinder head by using permanently installed studs. Kit:...

Drag Specialties - High Performance AGM Battery - OEM# 66007-84 fits '65-'84 Touring Replaces OEM#66007-84. Note: Not spill proof design, acid not included. Features Specifically designed for...

Drag Specialties - Fiber, Organic, or Steel Clutch Plates fits '68-'E84 Touring Models The Drag Specialties Clutch plates are built to last, any way you want them! These friction plates are...

Drag Specialties - Organic Aramid Fiber Front Brake Pads (Repl. OEM# 44135-74) Replacement OEM# 44135-74 Features Perfect choice for polished, chromed or billet steel rotors Brake pads are...

Customs Dynamics - Pre-1999 Tailight Baseplate for Harley Davidson This Baseplate comes with all of the necessary parts for an easy installation and is available in your choice of a black or chrome...

Drag Specialties - Fork Slider Covers - Fits Harley-Davidson '49-'13 FL Touring, '86-'17 FLST Softail Models These fork boots by Drag Specialties fit Harley-Davidson 99-13 FLT/FLHT Models, 00-17...

Paughco 1-3/4" Mounting Clamp Mounting clamp required to install 1800-1867 (Paughco 1-3/4" Drag Pipes for FL Models, 34" pipes).

S&S Super E and G Carburetors Fits '36-'06 Big Twin, '57-'06 XL Models Features: Black coating is heat- and chemical-resistant Standard venturi diameter Four fuel delivery ports for better fuel...

VT No: 35-0757 Brass hex petcock has 90° right hand spigot and is constructed of forged brass with screen. Features 3/8" National Pipe Thread brass hose spigot. On/Off handle is chrome. For early...

The Colony Rocker Shaft End Plug and Cap Kit: Meets or exceeds OEM specifications Made in the USA Chrome plated allen style Fitment: '71-Up Shovelhead and '71-'85 XL Models

James Gaskets Gasket Kits use state of the art materials and production methods to make the best gaskets available. Made in the USA Fitment: '70-'98 Big Twin Models

James Gaskets Gasket Kits use state of the art materials and production methods to make the best gaskets available. Made in the USA Fitment: '70-'92 FL, FLH, FLT, FXR, Softail

James Gaskets Gasket Kits use state of the art materials and production methods to make the best gaskets available. Made in the USA Fitment: '70-'92 FLT, FXR, Softail

The HardDrive Shovel Rocker Arms: Fits '66-'84 Big Twin Models Rocker arms include bushings

The HardDrive Shovel Rocker Arms: Fits '66-'84 Big Twin Models Rocker arms include bushings

Joker Machine Billet Derby Cover: Black, Finned Includes mounting hardware Made in USA Fitment: '84-'98 Big Twin Models

Colony - 8141-34 Cadmium Stock Engine Case Bolt Kit fits '70-'78 FL, '71-'78 FX Models Engine case kit includes all the necessary hardware to bolt together engine cases. Fitment: FX 1971-1978

Cylinder head engine brace mount. Fits: FL 1966-1984 FX 1971-1984

Upper and lower allen motor mount kit Fits: FL 1970-1984 FX 1971-1984

Colony - Rocker Arm Shaft Acorn Nut and Washer Kit - fits Harley FL, FX, and XL ( see desc.) Rocker arm shaft chrome acorn nut and washer kit. Fits: FL 1966-1984 FX 1971-1984 FLT...

Colony - 8401-8 Rocker Shaft Cadmium End Cap Type Nuts with Washers fits '79-'83 FLT, '71-'84 FX, '82-'83 FXR Models Rocker arm shaft end nut kit contains 4 cap nuts and washers with cadmium...

Rocker shaft end caps, chrome finish. Fits: FL 1971-1984 FX 1971-1984 FLT 1979-1983 FXR 1982-1983 XL 1971-1985

The chrome rocker arm shaft end plug makes installation and removal a much easier job than with the original slotted part. Includes 4 plugs per set. Fits: FL 1971-1984 FX 1971-1984 FLT...

Colony Upper Pushrod Cover (Inner). OEM No: 17935-66 Fits: EL 1936-1940 FL 1941-1978 FX 1971-1978 XL 1957-1978

Drag Specialties - Derby Covers  These Domed Design Deby Covers have a clean simple look. Features Die-cast construction Available in multiple finishes Includes mounting...

Black round mesh air cleaner includes element and is 5.5" for Bendix-Keihin carburetors. Fits:FL 1972-1984FX 1972-1984FXST 1984-1989XL 1972-1987FXR 1982-1989FLT 1979-1989

VT No: 35-0759 Brass hex petcock has 90° left hand spigot and is constructed of forged brass with screen. Features 3/8" National Pipe Thread brass hose spigot with nut. On/Off handle is chrome. ...

Harley Davidson Motorcycle Sifton Chrome Hex Petcock Left Hand Outlet 3/8" NPT Chrome hex petcock has 90° left hand spigot and is constructed of forged brass with screen. Features 3/8" National Pipe...

S&S - Stealth Air Cleaner Kit fits '36-'92 Big Twin, '57-'90 XL w/ S&S E/G Carb. For '93-'92 Big Twin, '57-'90 XL models with S&S E/G series carbs. Kit does not come with cover. Must use with...

S&S Super G Carburetor Features: Super G has a 2.0625" throat at the butterfly and a 1.75" venturi and is recommended for use on 90-cubic-inch and larger high-performance and modified...

S&S Super E Carburetor  Features: Super E has a 1.875" throat at the butterfly and a 1.5625" venturi and is recommended for use on Big Twin or Sportster engines up to 100-cubic-inch Individual...

V-Twin Harley Sifton Hex Petcock Left Hand Outlet 3/8" NPT - Chrome The V-Twin Sifton Hex Petcock is made from tough forged brass. This is designed to ease the fuel line hookup and make it an easier...

V-Twin Harley Sifton Hex Petcock 3/8" NPT - Chrome Chrome hex petcock has 90° right hand spigot and is constructed of forged brass with screen. Features 3/8" National Pipe Thread brass hose spigot. ...