Electra Glide FLH

Skeleton foot kickstand features constructed polished stainless steel. End is threaded for hex bolt.May require shim wedge under kickstand mount or washer on shaft. Order spring and lock tab...

Zinc plated primary footboard mounting kit includes hardware and extended rear footboard bracket for use with custom drag or muffler pipes.Kit is for use with OE type exhaust systems. *NOTE: Includes...

Zinc oval inspection cover for the left side with footpeg spline.. Fits:FL 1965-1984Additional Information UOM1 - SET

Zinc splined footpeg support is for the right side and is offset type.Mounting hole inner diameter measures 3/4". Fits:FL 1965-1977Additional Information UO

ISO mount swingarm chain guard has a black finish and comes with rubber bushing and rear bracket.Can also be used on 1958-1984 FL for the lighter FX look. Fits:FX 1966-1978FL 1958-1984FXE...

FLH style full chain guard has a gloss black finish and includes bushing. Fits:FL 1963-1982Additional Information OEM No.60302-63

FLH style full chain guard has a chrome finish and includes bushing.Center hole to center hole measures 10-5/8". Fits:FL 1963-1982Additional Information OEM

Footpeg mount stud has 1/2" x 20 thread with a zinc finish. Fits:FL 1974-1984FX 1974-1984Additional Information OEM No.52683-74 <

Lower front mount tie rod ball joint.The ball diameter is 1.259", the step downo from that is .940", the center is 1.007", the step down from the center is .857" and the end is 1.012". Fits:VL...

Includes 16-7/8" extra long rod, nuts and spacers.For use with 1.060" diameter seat posts. Fits:UL 1937-1948EL 1936-1940FL 1941-1980Additional Information

Seat post kit includes 15-7/8" rod and mounting hardware. Fits:UL 1937-1948EL 1936-1940FL 1941-1980Additional Information UOM1 - KIT

Handlebar control kit includes master cylinder with clamp, clutch handle with clamp, switch housings and bracket in a polished finish.Switch wiring is not included. The master cylinder has a 3/4"...

Kit includes master cylinder with clamp, clutch handle with clamp, chrome switch housings, black switches, and bracket.Handlebar wiring harness and switch assembly in this kit includes wire...

Chrome contour hand lever set are designed for easy grip. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information UOM1 - SET

Polished smooth handlebar control switch coverIncludes rubber grommets in riser top vibration damper. Accepts 1/2" x 13 bolts sold separately. Fits:FL 1972-1981FX 1973-1981XL 1973-1981Additional...

Handlebar control kit includes master cylinder with clamp, clutch handle with clamp, switch housings and bracket in a chrome finish.Switch wiring is not included. The master cylinder has a 3/4" bore...

Nylon bushing for hand lever Fits:FX 1971-1984XL 1968-1987FXR 1984-1987FXST 1984-1987FLT 1979-1987FLST 1986-1987FL 1968-1984Additional Information

Polished clutch hand lever assembly.Order switch housing separately. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information UOM

V-Twin - 26-2099 - Polished Handlebar Master Cylinder AssemblyDescriptionPolished handlebar 3/4" bore master cylinder assembly includes the brake lever, stop light switch, reservoir cover, and all...

V-Twin - 26-2097 - Black Handlebar Master Cylinder and Clutch Lever AssemblyDescriptionBrake master cylinder has a 3/4" bore and includes the brake lever, reservoir cover, switch housing and all...

V-Twin - 26-2093 - Handlebar Control Kit BlackDescriptionBlack handlebar control kit includes black master cylinder, chrome brake and clutch levers, black switch housings and wired switches.The...

Bates polished stainless steel hand lever assembly with ball end includes slotted lever bushing as original with 3/8" hole for brake or clutch. Fits:FL 1968-1984Additional Information

Black vertical switch housing only, will also accepts factory rocker switches and buttons. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information

Replica black clutch lever assembly for 1973-81 models. The clutch lever assembly comes complete with a black lever bracket, an alloy lever, pivot pin and anchor pin.*NOTE: Order switch housings...

Polished handlebar switch housing accepts screw in throttle and idle cables. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information OEM

Black handlebar plain switch housing accepts screw in throttle and idle cables. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information

Black clutch lever mount Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information OEM No.38608-72

Master cylinder has a 3/4" bore and includes the brake lever, stop light switch, reservoir cover, and all internal components.Accepts a 10mm banjo bolt. Fits:XL 1972-1981FL 1972-1981FX...

Chrome angle fitting for the brake hose to the front master cylinder. Fits:XL 1972-1981FL 1972-1981Additional Information OEM No.43307-78

Front master cylinder plunger assembly hardware only. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information UOM1 - KIT

Wide hand levers are formed to make them easier and more comfortable, for use on big twin models.Set of two. Lever shape is similar to those found on the 1996-up motorcycles. Can be used on 1972-1981...

3/4" handlebar master cylinder rebuild kit includes the plunger hardware. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information UOM

Hand lever pivot pin set consists of one pin, one grease fit ting and one retaining ring. Fits:XL 1971-1981FL 1965-1981FX 1971-1981Additional Information

Replica chrome clutch lever assembly for 1973-81 models. The clutch lever assembly comes complete with lever bracket, lever, pivot pin and anchor pin.*NOTE: Order switch housings separately. Fits:FL...

Polished hand lever is clutch or brake type. Fits:XL 1971-1981FL 1965-1981FX 1971-1981Additional Information OEM No.45024-65

Chrome hand lever is clutch or brake type Fits:XL 1971-1981FL 1965-1981FX 1971-1981Additional Information OEM No.45024-65

Polished brake hand lever. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.45016-72

Chrome brake hand lever Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.45016-72

Smooth chrome handlebar control switch housing.Housing accepts screw in throttle and idle cables. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information

Chrome vertical switch housing only, will also accepts factory rocker switches and buttons.. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information