Super Glide FX Kick Start

Chrome 1/2" hole cup shock stud washers Fits:FL 1965-1984FX 1971-1984XLH 1972-1974Additional Information OEM No.54545-65

Chrome 3/8" hole cup shock stud washers Fits:FX 1971-1984XLH 1972-1974FL 1965-1972Additional Information OEM No.54543-65

Upper rear shock zinc stud kit includes four cup washers and two studs. Has stud for 1/2" shock eyelet. Fits:FX 1973-1984FL 1973-1984Additional Information

V-Twin - 52-2034 - 17 inch x 4.5 inch Replica Rear Spoke WheelDescription17" x 4.50" Replica wheel assembly features chrome rim, 40 chrome spokes, chrome hub with internals.The hub is 6" in length...

Replica 16" X 3.50" wheel assembly features chrome rim, 40 polished stainless steel spokes, chrome hub with internals.NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Replica 16" X 3.00" single disc wheel assembly features a black rim, 40 chrome spokes and a black hub with internals.This wheel has a large valve stem hole to accept rubber valve stems. The hole for...

Replica 16" X 4.00" front or rear wheel assembly features chrome rim, 40 stainless steel spokes, chrome hub with internals.Rim accepts side valve and rubber stem. NOTE: All spokes on wheel need to be...

Replica 16" X 4.00" front or rear wheel assembly features chrome rim, 40 chrome spokes, chrome hub with internals.NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Front or rear 16" x 3" wheel with chrome drop center rim, chrome hub with 3/4" bearings installed, and 40 twirled chrome spokes.NOTE: All spokes on wheel need to be inspected and re-torqued after 500...

Replica 16" X 3.00" single disc front or rear wheel assembly features chrome rim with small center hole for valve stem, 40 chrome spokes, chrome hub with inernals.*NOTE: Rim features small center...

Replica 18" X 4.25" wheel assembly features chrome rim, 40 chrome spokes, chrome hub with internals.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual...

Wheel and caliper kit includes a chrome wheel assembly, chrome caliper, chrome 51 tooth sprocket, rear drilled disc, bolts, chrome caliper bracket, support spring, and chrome stay bar with bolts...

16" x 3.0" front or rear wheel assembly includes chrome profile smooth rim, chrome hub with 3/4" bearings and internals installed, chrome spokes.Wheel has a 3/8" disc hole and 7/16" sprocket mount...

Chrome 16" x 3.0" wheel assembly is laced and trued with bearings installed.Includes a drilled 11-1/2" steel brake disc and a chrome 51 tooth sprocket. Chrome bolts are supplied for each side. ...

Chrome 16" x 3.0" wheel assembly is laced and trued with bearings installed.Includes drilled 10" steel brake disc and a chrome 51 tooth sprocket. Chrome bolts are supplied for each side. ...

V-Twin - 52-0301 - 19 inch X 2.50 inch Wheel Rim and Spoke Kit ChromeDescriptionRim and spoke set include 19" x 2.50" front rim with 40 chrome spokes with 40 spoke nipples.Rim is steel and drop...

V-Twin - 52-0300 - 16 inch x 3 inch Wheel Rim and Spoke Kit Chrome SteelDescriptionRim and spoke set include 16" x 3" front rim with 40 chrome spokes with 40 spoke nipples.For use with a steel hub...

Replica 16" X 3.00" wheel assembly features drop center chrome rim, 40 stainless steel spokes, chrome hub with internals, for front or rear applications.The hole for the valve stem that is located on...

Replica 19" X 2.50" single disc front clover style wheel feature a chrome drop center hub with internal bearings installed, 40 chrome spokes and chrome rim.**NOTE: All spokes on wheel need to be...

Replica 21" X 1.85" single disc front clover type wheel features a chrome hub with internal bearings installed, 40 chrome spokes and chrome rim.**NOTE: All spokes on wheel need to be inspected and...

Rear frame swingarm features a chrome finish. Bearings and races are not included. Fits:FX 1970-1984Additional Information UOM1 - EA

V-Twin - 51-1322 - Lowered Rear Axle Plate Set RawDescriptionLowered rear axle plates are threaded 3/8"-18 for fender brace sissy bar mounting. Adjusters threaded 3/8"-24 use screws for adjusters, to...

Rear frame swingarm is chrome and is for 4-speed rear chain drive models. Bearings and races are not included.Measures 12.5" from center of shock bolt to center of swingarm pin and 12.50" from the...

Rear frame swingarm is black and is for 4-speed rear chain drive models. Bearings and races are not included.Measures 12.250" from center of shock bolt to center of swingarm pin and 12.50" from the...

Engine bar features 1-1/4" tubing.This engine bar is not for use with extended forward controls. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection...

Raw finish dropped swingarm features a raised up axle position, so this lowers the swingarm and chassis in relation to the axle. Axle slots are 3/4", for disc brake applications. Swingarm is for use...

Chrome finish dropped swingarm features a raised up axle position, so this lowers the swingarm and chassis in relation to the axle. Axle slots are 3/4", for disc brake applications.Lowers bike 1/2"...

This 5th Mount transmission frame repair tab is weld on style for stock frames. The tab is constructed of steel and has a raw finish.May require finishing prior to installing. Fits:FX 1971-1984FL...

Brake line tee tab. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - EA Manufacturer

Upper shock frame mounts are weld on style for stock frames.Sold as a set of two. Fits:FL 1965-1984FX 1971-1984Additional Information UOM1

This weld on style coil mount frame block set repairs stock frames and has a 3/8"-24 UNF thread. Fits:FL 1956-1983FX 1971-1983Additional Information UOM<

Rigid frame front oil tank mount casting to be welded on.Thread is 5/16 x 24 and the lip from the bottom to the top measures 1-1/4". For use with 1-1/2" bar. Fits:FL 1941-1984FX 1972-1984EL...

Rear frame engine mount and front transmission mount. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - EA

Weld on frame footpeg mount without thread.Mount can be welded to 1958-1977 swingarm frames to utilize the stock FXE mount and raise the peg position. Sold as a pair. Fits:FX 1971-1978FL...

Replica rear hardtail frame section is duplicated from an original rigid frame. Weld-on type and does not have seat post bushing.The rear transmission mounts are 1-1/2" tall. This hardtail includes...

Replica wishbone frame is an authentic reproduction of a 1948 Big Twin rigid frame with seat post, axle, and transmission plate already installed. The legs are smooth and do not have horn mount...

FL fender strut set features a chrome finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. The distance from the...

FL fender strut set features a black finish solid lazer cut from heavy duty steel.Allows custom fenders to be mounted at the height desired for seat position requirements. *NOTE: Requires 7-1/4"...

Chrome rear fender strut set is of solid steel construction and is for use with Bobbed fender only. Fits:FX 1973-1984FL 1958-1984Additional Information U

V-Twin - 10-0003 - S&S Stock Bore Shovelhead Engine Crankcase SetDescriptionCrankcase set comes ready to assemble.S&S Crankcase Sets are shipped set-up with Timken left side bearing and race...