1976

Tapered bearing minimizes friction. Bearing is for a 3/4" axle. Fits:FXD 1991-1999 Front and RearFL 1973-1984 Front and RearFLT 1986-1999 RearFX 1973-1984 Front and RearXL 1979-1999 RearFLST...

Swingarm bearing and race is for 3/4" axle.The cup outer ring has a 1.781" outside diameter, cone inner ring has a .75" inside diameter. Cone and cup assembly have a .656" width. Bearing and race are...

Rebuild kit includes 3/4" bearing, tube spacer, seal, seal spacer, and lock nut for steel hubs.*NOTE: For 11/16" axle diameter. Fits:XLCH 1957-1978K 1952-1956XLH 1957-1978Additional Information

Rebuild kit includes inner spacer, 3/4" bearings, races, seals, seal spacers for rebuilding of alloy front hubs. Fits:FX 1974-1977XL 1974-1977Additional Information

Rear wheel hub bearing washer. Fits:XL 1957-1978K 1954-1956Additional Information OEM No.41195-63 UOM

Smooth speedometer drive spacer replaces drive units. Fits:XL 1973-1983FX 1973-1983Additional Information UOM1 - EA

Kit includes zinc plated axle, spacer, and chrome nut. Fits:FL 1973-1980FX 1980-1983Additional Information OEM No.43875-73

Bearing spacer set. Fits:XL 1952-1981Additional Information OEM No.47518-52 UOM1 - SET

Pyramid axle adjuster blocks.Order nut kit separately. Fits:XL 1979-1996FX 1973-1984FL 1973-1984Additional Information UOM1 - SET

Die cast chrome pyramid end caps with solid block type pull adjusters for 3/4" axles. Fits:XL 1979-1996FX 1973-1984FL 1973-1984Additional Information

Front or rear wheel hub bearing tube orange spacer. This spacer measures 4.420" overall length.For use on a steel dual flange hub. Fits:FXR 1982-1986FX 1971-1984FXST 1984-1992FLST 1986-1992Additional...

Front or rear wheel hub bearing tube white spacer. This spacer measures 4.448".For use on steel dual flange hubs. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999XL 1979-1999 RearFX...

Front or rear wheel hub bearing tube yellow spacer. This spacer measures 4.434".For use on steel dual flange hubs. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999XL 1979-1999 RearFX...

Adjuster kit includes the adjuster pill and chrome end plates. Fits:XL 1979-1996FX 1973-1984FL 1973-1984Additional Information OEM No.4

Axle adjuster bolts onlyThread size is 5/16-24. Fits:XL 1985-1996FX 1973-1984FL 1973-1984Additional Information OEM No.41570-77

Chrome rear axle left side spacer has an overall length of 2".*NOTE: For 11/16" axle diameter. Fits:XL 1957-1978K 1952-1956Additional Information O

Rear wheel hub bearing tube spacer for 1963-1978 XL rear. Fits:XL 1963-1978 rearAdditional Information OEM No.41185-63

Front wheel hub bearing tube green & orange spacer is 2.148" long for aluminum hub. Fits:FX 1973-1977 frontXL 1973-1977 frontAdditional Information OEM N

Front wheel seal spacer for single disc has an overall length of 1/4". Fits:XLH 1974-1977FX 1974-1977XL 1974-1977XLCH 1974-1977Additional Information

Zinc front axle spacer has an inner diameter of 3/4" for left side application. Spacer has an overall length of 1/2". Fits:FL 1973-1984FX 1980-1983Additional Information

V-Twin - 44-0258 - Zinc Rear Axle Nut KitDescriptionZinc axle nut kit includes a 5/8"-18 hex nut, 2 extra thick washers and 1 lock washer.For use on square swingarms. For 3/4" axles, universal. ...

Triple stepped axle with threaded end has a 10-1/8" bearing surface length and can be used to replace a worn out or damaged axle.Order nut kit separately. Fits:FL 1973-1980FX 1980-1983Additional...

Axle with flat head and threaded end has a 10-1/2" bearing surface lengthand can be used to replace a worn out or damaged axle. Threaded end measures 5/18 x 18.May be used in the Timken hubs, may...

Axle with a hex head and a threaded end with a 11-7/8" bearing surface length and can be used to replace a worn out or damaged axle. Fits:FX 1973-1984FL 1973-1984Additional Information

Axle with threaded end has a 7-5/8" bearing surface length and can be used to replace a worn out or damaged axle. Fits:XL 1973-1977 39mm ForksFX 1973-1977Additional Information

Triple stepped axle with threaded end has a 10-1/8" bearing surface length and can be used to replace a worn out or damaged axle.The outer diameter of the first step down towards the threads is ...

Dust shield set for the swingarm. Fits:XL 1952-1981Additional Information OEM No.47519-52 UOM1 - SET<

Swingarm pivot bolt features a chrome finish. Fits:XL 1952-1981Additional Information OEM No.47511-52 UOM

Rebuilt kit includes spacers, bearings, races, seals, and lock tab. Fits:FX 1973-1984FL 1973-1984Additional Information UOM1 - KIT

Bearing and seal kit includes tapered bearings, races, and seals. Fits:FX 1973-1984FL 1973-1984Additional Information UOM1 - KIT

Black pivot bolt. Fits:FX 1971-1984FL 1958-1984Additional Information OEM No.47510-58 UOM1 -

Pivot spacer set.Sold in a quantity of 2. Fits:FX 1971-1984FL 1958-1984Additional Information OEM No.47517-58

Pivot bolt is 8". Fits:FX 1971-1984FL 1958-1984Additional Information OEM No.47510-58 UOM1 -

Pivot pin nut. Fits:XL 1971-1981Additional Information OEM No.47512-74 UOM1 - EA

Pivot pin lock nut. Fits:XL 1974-1981Additional Information OEM No.47514-74 UOM1 - EA

Right side swingarm lock nut. Fits:XL 1974-1981Additional Information OEM No.47515-74 UOM1 - EA<

Self-tapping raw swingarm pivot bolt is .025" oversize. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - EA

Lid assembly for jockey style 3-speed & reverse transmission Fits:FL 1941-1978Additional Information OEM No.34800-65

Polished 4-speed kick starter cover is cable operated clutch release mechanism with 3-ball internal ramp design.For use on kick starter or electric start models. Designed by Rodan Cycle of...

One of our most popular items is this chrome inner primary cover with the hole for the mid shift control lever as OEM. It features a 9-hole pattern for the outer cover to bolt to. Includes sealed...