1976

Weed wacker coil for Dave Hale. Fits:XL 1970-1980Additional Information UOM1 - EA ManufacturerV-Twin<

Magneto gear kit. Fits:FLST 1984-1992FX 1971-1983FL 1970-1983FXST 1984-1992Additional Information UOM1 - EA

Magneto rotor with shaft. Fits:FLST 1984-1992FX 1971-1983FL 1970-1983FXST 1984-1992Additional Information UOM1 - EA

XLH battery cable set for electric start models.Sold as a set of 3, which includes one 8-1/2" braided flat unsheathed battery cable and two 15-1/2" black positive battery cables. Fits:XLH...

Starter installation screw kit is for electric start conversion kits by V-Twin. Fits:XL 1967-1979Additional Information UOM1 - KIT

Starter cable set is a 3 piece set.This three piece set includes one 6 gauge battery cable with 13/32" and 11/32" holes sizes and two 8 gauge black battery cablew with 17/16" and 11/32" hole sizes,...

Starter installation screw kit is for electric start conversion kits by V-Twin. Fits:FL 1965-1985Additional Information UOM1 - KIT

XL 12 volt alternator gear kit includes gear, nut, spacer and deflector washer. Kit is for 32E 12 volt style alternator.Accepts 1/4 or 5/16 mount screws. Fits:XL 1958-1983Additional Information

V-Fire point set is the exact replacement for the years listed.Sold in a pack of 5. Fits:FL 1970-1978XL 1971-1978Additional Information OEM No.

2.0 kW starter motor includes a 9 tooth starter gear and 6 screw mounting for electric starter kits.Mounts with 6 screws on face. MFG # WW1370. Fits:FL 1958-1985Additional Information

Chrome alternator bolts on in place of original 12 volt generator. Chrome state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the rotor...

Black alternator bolts on in place of an original 12 volt generator. Black solid state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses...

V-Fire single fire ignition kit includes a V-Fire single fire ignition kit with a chrome 12 volt coil.Mounts to stock bracket and accepts stock type coil covers. Works with most aftermarket single...

Starter solenoid kit includes a zinc solenoid, plunger assembly kit and an end cover boot. Fits:FL 1965-1984FXST 1987-1988Additional Information UOM

V-Fire dual fire ignition kit includes a V-Fire dual fire ignition kit with a black 12 volt coil.Includes a mechanical advance unit and all hardware. *NOTE: Dual fire is where there are two sparks at...

XLH battery cable set includes a black positive/negetive 15-1/2" cable and a braided flat negative 9-1/2" cable.Sold as a set of 2. Fits:XLH 1967-1978Additional Information

Big Twin coil mount with swtich bracket mounts bolts on to existing studs on FL and FX frames but does not accept cover. Mount features a raw finish.Bracket does not accept coil cover. *NOTE: Must...

York electric starter kit. Fits:FL 1958-1984Additional Information UOM1 - KIT ManufacturerV-Twin

Kit includes an updated 1.4kW hitachi type black high torque starter and all related components as shown.*NOTE: When fitting to FLH models, a FXE battery will be required to fit FXE battery. Fits:FL...

Magneto top cover features a red finish and comes with a key. Fits:FX 1971-1980FL 1955-1980Additional Information UOM1 - EA

Magneto drive gear set is for use with Burkhardt magneto drive assemblies. Fits:FL 1970-1992Additional Information UOM1 - SET

Builders wiring harness kit features plastic wires in original factory color codes in vinyl loom with terminals installed.Builders kit includes handlebar, tail lamp, coil and regulator wires...

This V-Fire Tuneable Ignition Advance Assembly includes a st ainless advance base, points plate with "Blue Streak" points , and condenser with hardware.Three pairs of color coated springs are also...

Handlebar wiring harness kit is extended type and color coded. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information UOM1 - E

Main wiring harness for XL kick starter models.Order handlebar, tail lamp and turn signal wires separately. Fits:XLCH 1975-1976 kick starter modelsAdditional Information

Replica starter relay will reduce voltage drop in single fire ignition applications during cranking, and will allow full 12 volt battery voltage to the module and coil. Fits:XL 1973-1979FX...

New Old Stock" mechanical brake light black switch pull type. Fits:XLH 1975-1976XLCH 1975-1976Additional Information OEM No.72004-75

Turn signal wiring harness kit has PVC covered wires. Fits:FL 1970-1984Additional Information UOM1 - KIT Manuf

V-Fire ignition kit is single fire and includes mechanical advance unit, hardware, and wiring instructions.Black wire is for the front and the white wire is for the rear. Order coil separately...

V-Fire dual fire ignition kit includes a mechanical advance unit and all hardware.Ignition kit is dual fire where there are two sparks at the same time. Critical wiring instructions are included...

Button style handlebar starter or horn switch comes without wire. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.

Button style handlebar switch is for front brake and comes without wire. Thread is 1/4-32. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information

Plain Rocker style handlebar switch comes without wire. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information UOM10 - PK

Battery cable is 6 gauge with 13/32" and 11/32" hole sizes on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shielded terminal ends. Use for ground post. Fits:FL...

Battery cable is 6 gauge with 17/16" and 11/32" hole sizes on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shield terminal ends. Used for switch to starter...

Battery cable is 6 gauge with 3/8" and 11/32" hole size on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shield terminal ends. Used for positive post on 1982-1984...

Black battery cable is 8 gauge with 17/16" and 11/32" hole size on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shield terminal ends. Used for solenoid to battery...

Starter is 1.4kW unit that generates more power and shaft speed than the original type 0.8kW starter.Starter includes housing to mount to 1965-1978 Big Twin. Unit is Presolite high output type...

V-Fire ignition advance unit features stainless steel base, heat treated weights, and cam center screw for 1970-up mechanical advance ignition. Fits:FX 1971-1978FL 1970-1978XL 1970-1978Additional...

Relay to ground wire. Fits:XL 1970-1980FXE 1971-1978Additional Information OEM No.70169-70 UOM