1976

Kayaba fork damper tube valve assembly.Sold as a pair. Fits:XL 1973-1974XLH 1973-1974FX 1973-1977XLCH 1973-1974Additional Information

Showa kit includes damper tubes with rings, screws, washers, lower stops, slider seal washers, and retaining rings for both sides. Fits:FX 1976-1983XL 1976-1983Additional Information

Chrome lower triple tree with lock tab. Triple trees accept 41mm fork tubes on 1949-1984 FL models. Fits:FLH 1949-1984Additional Information OEM No.45700

Fork tube set has stock length of 23-1/4".Before installing, compare new and old tubes. Be sure the stock top plugs fit into the new fork tubes. Sold as a pair. ...

Fork tube set is 6" over stock with a total length of 26". Stock length is 20". Tubes are precision machined ground finish for fitment and quality.Before installing, compare old and new tubes. Be...

Fork tube set is 4" over stock with total length of 24". Stock length is 20". Tubes are precision machined ground finish for fitment and quality.Before installing, compare old and new tubes. Be sure...

Fork tube set is 2" over stock with a total length of 22". Stock length is 20". Tubes are precision machined with ground finish for fit and quality.Before installing, compare old and new tubes. Be...

Fork tube set is stock length and precision machined with ground finish for fit and quality.Before installing, compare old and new tubes. Be sure the stock plugs fit into the new fork tubes. Sold as...

Chrome fork slider axle cap. Fits:FL 1949-1976Additional Information OEM No.45836-48 UOM1 - EA

Zinc glide axle fork slider cap Fits:FL 1949-1976Additional Information OEM No.45836-48 UOM1 - EA

Inner fork tube plug set with a bright zinc finish.Sold as a pair. Fits:FL 1949-1976Additional Information OEM No.45776-49

Chrome 35mm forged aluminum fork brace adds rigidity to forks by clamping to fork seal of lower legs.Bushings are not required for installation Fits:FX 1975-1984FXR 1982-1984XL 1975-1986Additional...

Kit includes cups, races, 1" bearings, and dust shields.Sold as a pair. Fits:FL 1948-1984Additional Information UOM1 - SET

The cone nut has a thin profile and allows use of outer covers and cowls. Fits:FLH 1949-1984Additional Information UOM1 - KIT

Chrome fork neck cup set with stop. Fits:FX 1971-1984FL 1949-1984FXST 1986-1999Additional Information UOM1 - SET

Zinc plated mega neck cup set includes bearings and races.The diameter of the part that goes into the frame measures 1-5/16". Fits:FL 1949-1984Additional Information

Neck cup kit includes races, bearings, neck cups, and pieces for entire installation on Big Twins and custom frames which accept press in neck cups.Has a built in stop and allows the turning radius...

Kit includes a chrome cup set, bearing set, dust shields, pins and a built in fork stop.Kit replaces the existing removable cups to provide a 3  rake when installed. Raked neck bearing and rake kits...

Kit includes the cup set with an outer diameter of 1-1/4", tapered bearing set, and dust shields without fork stop on the neck cup for 1" stem.Replaces existing removable cups to provide a 3  rake...

Polished handlebar clamp cover is smooth style. Fits:FL 1960-1979Additional Information OEM No.56590-60 UOM

Zinc bearing adjusting nut for the triple tree Fits:FXST 1984-1999FL 1960-1984FLST 1986-1999Additional Information OEM No.48330-48B

Kit includes a cup set, tapered bearing set, and dust shields for 1" necks.Replaces the existing removable cups to provide a 3  rake when installed. Fits:FX 1971-1984FLH 1949-1984FXST...

7" cowl set is stamped and die cast replica in polished finish.The overall length from top to bottom is 8-3/4" and the distance is 6-5/8" from center to center of the holes. The width between the...

Fork neck cup and bearing kit has races installed and features a chrome finish. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information

7" cowl set is die cast replica in chrome finish.Sold as a pair. ...

Handlebar riser chrome cover is for the cowl top opening. It has a smooth style finish.The measurement from center of bolt holes to center of opening is 1-1/2". The measurement from bolt hole to bolt...

Kit includes cups, races, bearings, and covers.Features solid internal fork stops that are built into the cups and hidden away. For stock and custom rigid frames that accept stock XL neck cups...

Dust shield set for XL models. Fits:XL 1952-1977Additional Information UOM1 - SET ManufacturerV-Twin<

Timken fork neck cup tapered bearing set use with race.Includes top and bottom bearing. Order race separately. Fits:XL 1952-1977Additional Information UOM

Kit includes 2 chrome cups, 2 tapered bearings, and dust shields. Kit is for a 7/8" stem.To convert 1952-1977 ball bearing style cups to Timken tapered type. Kit includes two different size bearings,...

Fork triple tree sleeve Fits:XL 1952-1977Additional Information OEM No.45721-54 UOM1 - EA

Kayaba fork top spring collar.Sold as a pair. Fits:XL 1973-1977FX 1973-1977Additional Information OEM No.45985-73

Fork steering damper kit with adjusting knob.Kit includes alloy fork steering damper knob, fork steering damper plate, fork damper plate with pin, damper plate with hole, triple tree top nut,...

Alloy fork steering damper knob. Fits:FL 1960-1984Additional Information OEM No.46746-52 UOM1 - EA

Kit includes lock washer and nut. Fits:FXST 1984-1999FL 1960-1984FLST 1986-1999FX 1980-1986Additional Information OEM No.45718

Kit includes top nut, sleeve and dust cover. Fits:XL 1952-1977Additional Information UOM1 - KIT Manufacturer

Chrome fork slider cover set is stock length 6-5/8". Mount holes measure 1/4"x 28 thread.Sold as a pair. Use 1/4"-28 x 5/8" allen socket cap. Fits:FLH 1949-1984Additional Information <

Kayaba fork tube piston.Sold as a pair. Fits:FX 1973-1976XL 1973-1976Additional Information OEM No.45978-73

Kayaba fork damper tube screw set.Sold as a pair. Fits:FX 1973-1976XL 1973-1976Additional Information OEM No.45995-73

Zinc fork stem nutThread is 1"-24. Fits:FXST 1984-1999FL 1960-1984FLST 1986-1999FX 1980-1986Additional Information OEM No.