Sportster XLT 1000

Drag Specialties - 2.9-Gallon Gas Tank fits '54-'78 Sportster Models This particular gas tank uses a 3/8" NPT petcock, all others use 22mm; petcocks sold separately. NOTE: All tanks have petcocks on the right side. Features Bolt-on gas tanks...

Drag Specialties - 39-1/2" Black Vinyl Throttle Cable fits '74-'80 Big Twin, '74-'80 Sportster - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner...

Drag Specialties - 55" Black Vinyl High-Efficiency Clutch Cable fits '71-'85 Sportster - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for smooth...

Dynatek - Single-Fire Ignition and Coil Kit fits '70-'99 Big Twin & '71-'03 XL Models (Exc. Twin Cam, 1200S Models) Dynatek's complete electronic ignition systems are crafted with the hottest state-of-the-art engineering. This is the exact same...

Dynatek - Dual-Fire Ignition and Coil Kit fits '70-'99 Big Twin & '71-'03 XL Models (Exc. Twin Cam, 1200S Models) Dynatek's DSK61 Dyna S and coil system is the exact same race-winning, record-breaking ignition used by today's top drag and road...

DP - High-Performance Friction Clutch Plates fits '71-E'84 Sportster Models (Repl. OEM #37985-71) The DP High-Performance Friction Clutch Plates have DP's exclusive high-heat friction materials for fade-free performance. Qty. Included:...

DP - High-Performance Steel Clutch Plates fits '71-E'84 Sportster Models (Repl. OEM #37992-71) The DP High-Performance Steel Clutch Plates has will neither expand nor fade or promote clutch swell. Qty. Included: 8 Features Specifically designed to...

Pro-One - Millennium Derby Cover fits '70-'98 Big Twin Models - Chrome  These billet aluminum covers are available in a ball-milled or smooth design. Features Sold as each Fitment 1998 Harley-Davidson Road Glide...

Roland Sands Design - Nostalgia Points Cover fits '70-'99 Big Twin (Exc. Twin Cam Models) & '14-'21 Sportster Models (Exc. '21 Sportster S/RH 1250S Models) This points cover is machined from billet aluminum to exacting standards. Features Custom...

Drag Specialties - Rocker Box Cover fits '66-'84 Shovelhead Models - Polished Aluminum  This cover comes to you in a stunning polished aluminum finish. Features Includes both front and rear...

Drag Specialties - Rocker Box Cover fits '66-'84 Shovelhead Models - Chrome  This cover comes to you in a nice chrome finish. Features Includes both front and rear pieces Fitment 1984 Harley-Davidson Electra Glide Special...

Colony Filler/Clutch Plug fits '77-'85 XL The Colony filler/clutch plug is a chrome cap for transmission filler/clutch adjustment holes on non-vented Sportster primary covers. This plug has a hex style head and was made right here in the U.S.A. This is a...

Colony - 9212-16 Cadmium Headbolt Kit fits '73-'85 Sportster Models Headbolt kit with a cadmium finish. Fitment: XL 1973-1985

Thrashin Supply - P-54 Extra Grip Front/Rear Footpegs Thrashin's P-54 Extra Grip Front/Rear Footpegs are 2.25" Wide Tapered Platform pegs designed with grip surfaces that have a slight radius for improved shifting and braking whilst maintaining the...

V-Twin - Chrome Petcock W/ Nut and 90° Left Outlet fits '75-'94 Big Twin & '75-'95 Sportster Models This petcock is designed to be used with stock gas tanks or custom tanks with a 22mm outside thread. The shape of the petcock is built for a...

Sawicki Speed Shop - Billet End Cap Replacement Kit (Universal Fit) Sold each. Fitment Fits all pipes.

Drag Specialties - 53-1/16" Black Vinyl High-Efficiency Clutch Cable fits '71-'85 Harley Sportster Models - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for...

Colony - Gas Tank Restoration Spacers fits Universal Sportster Washers (OEM #61135-52) Features: OEM replacement spacers Fitment 2018-2020 Harley-Davidson Iron 1200 XLNS - - 2018-2019 Harley-Davidson Forty-Eight Special...

Drag Specialties - 36" Black Vinyl Throttle Cable fits '74-'80 Big Twin, '74-'80 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner...

Colony - 2665-18 Cadmium Rear Fender Mount Kit fits '59-'78 Sportster Models (OEM #8881-18) Features: Kit includes two 3/8"-24 bolts, four 5/16"-24 screws, four 5/16"-24 nuts, two 3/8"-24 nuts, four 5/16" lockwashers, and two 3/8" lock washers Made...

V-Twin - Chrome 35mm Fork Tube Set w/ 27-1/2" Length fits '73-'77 FX, '73-'74 Sportster Models Fork tube set is 4" over stock with a total length of 27-1/2 ". Stock length is 23-1/2". Before installing, compare new and old tubes. Be sure the stock...

V-Twin - Chrome 35mm Fork Tube Set w/ 25-1/2" Length fits '73-'77 FX, '73-'74 Sportster Models Fork tube set is 2" over stock with a total length of 25-1/2 ". Stock length is 23-1/2". Before installing, compare new and old tubes. Be sure the stock...

V-Twin - Chrome Finned Ignition System Cover fits '71-'03 Sportster Model Finned ignition system cover with chrome finish. Fitment: XL 1971-2003

V-Twin - 16" x 4" Rear Spoke Wheel fits '54-'56 K, '57-'78 Sportster Models Rear wheel assembly features a 40 hole 16" x 4" chrome rim, 40 chrome spokes and a rear hub with bearings installed. Wheel is laced and tured. Accepts a 130-140 tire size...

Colony - Cylinder Base XLR Type Nut fits '57-'84 Sportster Models Features: For use on specific applications Made in the U.S.A. Fitment 1983-1985 Harley-Davidson Sportster 1000 XLX - - 1983-1984 Harley-Davidson Sportster 1000...

Colony - Acorn Cylinder Base Hardware Kit fits '57-'85 Sportster Models Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1983-1985 Harley-Davidson Sportster 1000...

Colony - 8881-18 Chrome Rear Fender Mount Kit fits '59-'78 Sportster Models (OEM #2272, 4362) Features: Kit includes two 3/8"-24 bolts, four 5/16"-24 screws, four 5/16"-24 nuts, two 3/8"-24 nuts, four 5/16" lockwashers, and two 3/8" lock...

Colony - 8224-8 Rocker Shaft End Plug fits '71-'84 Shovelhead & '71-'85 Sportster Models (OEM #17448-71A, 7875) Features: Complete sets stock-style replacement rocker shaft end plugs, nuts, and washers Made in the U.S.A...

Drag Specialties - 30" Black Vinyl Throttle Cable fits '74-'80 Big Twin, '74-'80 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner...

DP - Heavy-Duty Clutch Kit fits '71-E'84 Sportster Models This HD clutch kit comes in a foam-lined hard plastic case which protects the clutch components from damage prior to installation. This case can be used to store and transport parts, tools or...

Yost Performance - High-Flow Fuel Nipples fits '00-'06 Keihn Carburetors (Butterfly/CV) - Single Outlet (Stainless-Steel) Features Flow more fuel than the stock OEM nipples Include removal tool Made in the U.S.A...

Yost Performance - High-Flow Fuel Nipples fits '00-'06 Keihn Carburetors (Butterfly/CV) - Single Outlet (Brass) Features Flow more fuel than the stock OEM nipples Include removal tool Made in the U.S.A...

V-Twin Roadster 3.5gal Gas Tank for Harley XL 1952-1978 Replaces Harley-Davidson part number 61006-57. Description: Replica gas tank has a right side petcock location, and fuel capacity of 3.5 gallons. Check the tank for flaws and fit before painting...

HardDrive 4-Speed Shocks: Replacement shocks for Sportsters Chrome Finish 14.5" Fitment: '54-'78 XL Models

Features: Billet 6061 aluminum Drilled with 1/2" hole for internal wiring Works with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Base hole tapped for standard 1/2-13 mounting bolts (bolts not included) Fits...

Thrashin Supply Co. - Aggressor Foot Pegs Features: Designed to provide the maximum amount of grip and improve ground clearance while maintaining a sleek and timeless design Twelve replaceable cone-shaped stainless steel cleats per footpeg Cutaway...

James Gasket - Primary Cover Gasket fits '86-'90 Sportster Models (OEM #34955-75) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Intake Manifold Gasket Kit fits '66-'84 Shovelhead, '57-'78 Sportster Models w/ Bendix/​Keihin (Butterfly Style (OEM #27002-57)) Features: Kit contains carb-to-intake seal and two intake-to-cylinder head...

Jims - 1747 Lockdown Axle Kit fits '86-'04 Sportster Models Features: Heavy-duty swingarm end caps and axle nut washer resist the bending and flexing seen with stock components Swingarm end caps fit more precisely into the end of the swingarm,...

Jims - 1168 Primary Cover Inspection Plug Tool fits '57-'90 Sportster Models Features: Use this tool to remove and install primary inspection plug Made in the USA