Electra Glide FLH

Chrome fork neck cup set with races installed.Sold as a pair. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information OEM No.

V-Twin - 24-0117 - Upper and Lower Zinc Dust ShieldsDescriptionSet includes both an upper and lower dust shields. Each shield is zinc and is for use with Timken style bearings.Sold as a pair...

V-Twin - 24-0114 - Upper and Lower Chrome Dust ShieldsDescriptionChrome upper and lower triple tree dust shield set is for use on Big Twin models with Timken style bearings.The lower cover is the...

Chrome hex type cone cover nut features cover with built in nut. Fits:FL 1949-1979Additional Information OEM No.48330-48

V-Twin - 24-0112 - Lower Triple Tree Zinc Dust ShieldDescriptionZinc lower dust shields have an inner diameter of 51mm for fork neck cup kit. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR...

Feature built in rubber seal where bearing contacts the top of the race. This kit chrome cups and dust shields. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FLH 1949-1984Additional Information

V-Twin - 24-0089 - Fork Bearing and Seal KitDescriptionFork bearing kit includes two tapered bearings and two seals. Fits:FL 1949-UPXL 1982-UPFX 1970-UPAdditional Information

Polished lower fork sliders are single disc. This fork slider set is for use with 1977-1984 FL type internals and fork tubes.. Fits:FL 1972-1984Additional Information

Fork tube set is 6" over stock with a total length of 26-7/8".Set of two. Before installing, compare old and new tubes. Be sure the stock top plug threads into the new tubes. Stock length is 20-7/8"...

Fork tubes are 24-7/8" and are stock length for FXWG, FXD models. Tubes are 4" over stock for FL models. Stock length for FL models is 20-7/8".Before installing, compare old and new tubes. Be sure...

Fork tubes are 20-7/8" stock total length.Before installing, compare old and new tubes. Be sure the stock top plug threads into the new fork tubes. Sold as a pair. *NOTE:...

V-Twin - 24-0011 - Fork Drain ScrewsDescriptionFork drain screws are supplied with washers and are sold in pairs. Fits:FL 1976-1984FLST 1986-2005FLT 1979-UPFXST 1984-2005Additional Information

Black 41mm adjustable triple tree kit includes fork plugs, lower adjustable tree and top tree with pivot bolts. Kit features 2 adjustable positions with a 12" rake in the raked position.Lower triple...

Chrome top triple tree accepts 41mm fork tubes. Fits:FL 1973-1984Additional Information OEM No.56121-73 UOM

Dura polished brake disc features a rustless finish and long service life. Compatible with all brake pads including sintered metal and OEM.Disc has a center hole inner diameter of 2". For use on...

This chrome billet aluminum master cylinder with offset hole replaces Wagner style master cylinders.This master cylinder has a bore size of 5/8" and a milled body design. It is 3-1/8" tall. Uses...

Kelsey Hayes type billet master cylinder has 5/8" bore with offset mount holes.This master cylinder can be used with 10mm banjo bolt or flare fittings. Fits:FL 1958-1978FX 1971-1978Additional...

Chrome brake caliper mount bracket for use with 10" disc. Fits:FL 1973-1980FX 1973-1980Additional Information OEM No.44166-73

Conversion kit updates 1973-1981 FX, FL models from a 10" disc to an 11-1/2" disc.Kit includes a 11.5" steel drilled rear disc, chrome caliper bracket, and black painted caliper with brake pads,...

Conversion kit updates 1973-1982 FX, FL models from a 10" disc to an 11-1/2" disc.Kit includes a 11.5" stainless steel drilled rear disc, chrome caliper bracket, and black painted caliper with brake...

Kit includes a chrome rear caliper, 10" steel drilled disc, chrome bolts, chrome support bracket, anchor bar with bolts. Fits:FLH 1973-1980FX 1973-1980Additional Information

Kit includes a rear caliper, 10" steel drilled disc, bolts, support bracket, and anchor bar with bolts in a black finish . Fits:FL 1973-1980FX 1973-1980Additional Information

V-Twin - 23-1988 - Front Brake Hose FittingDescription1/8" brake hose fitting. This fitting can also be used for the rear master cylinder. Fits:FL 1972-1981Additional Information

V-Twin - 23-1961 - Rear Master Cylinder Rebuild KitDescriptionRebuild kit includes the top gasket and two boots.For rebuilding disc or drum type master cylinders. Check service manual for required...

Hardware rebuild kit includes mount bracket, anchor arm, bolt set, mounting pin kit, rear brake pad set, caliper support.An oversized ground pin to repair elongated mount hole inthe caliper body is...

Help dampen your rattling pads with this anti vibration kit for the front brake calipers.Use tops and bushings from existing Flanders risers. Fits:FLH 1973-1978FL 1973-1978Additional Information

Chrome steel spacer is 3/8" x 3/4" x 3/16".This spacer is used in the rear master cylinder and also a spacer for the brake pedal stop. Spacer can also be used on banana bulleye calipers that utilizes...

Oversize brake caliper mounting pin rebuild kit replaces stock mounting pin by boring caliper hole oversize giving a longer life to the caliper housing before replacement. Fits:FL 1973-1980FX...

Mount pin for rear brake caliper. Fits:FL 1973-1980FX 1973-1980Additional Information OEM No.44107-72

Replacement kit includes mounting stud, lock nut and washer, 2 brake pad pins and stainless steel caliper mounting bracket bushing.This kit eliminates brake squeaking, grinding, and caliper wobble...

Rebuild kit for handlebar brake master cylinder assemblies. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.4506

Hydraulic brake pedal features a stainless steel finish. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA

Caliper piston and seal kit includes round o-ring, piston and matched seal kit.Sealing ring is the "square profile" type and can be used to fit on front and rear 1980-up banana calipers. Fits:FLH...

Brake pedal plate is hydraulic type. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA Ma

Pedal and master cylinder mount plate is for AEE hydraulic brake kit and features a zinc plated finish. Fits:FL 1941-1984FX 1973-1984Additional Information

Zinc plated brake pedal mount plate for hydraulic applications. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA

Banana Caliper has smooth chrome finish and is fully assembled with disc pads and all internals.Caliper accepts a 1/8" National Pipe Thread line. Banana front calipers uses different pistons than the...

Our banana caliper has a black finish with a bullseye design and is fully assembled with disc pads and all internals Caliper accepts 1/8" national pipe thread line.Banana front calipers uses...

Rear banana caliper has a smooth chrome finish and is fully assembled with brake pads and all internals. Calipers accept 1/8" national pipe thread line.Includes mounting pins. Fits:FL 1973-1980...

Our Banana Caliper has a black finish with a bullseye design and is fully assembled with disc pads and all internals.Includes caliper anti-rattle kit. Caliper accepts a 1/8" national pipe thread line...