Sportster XLCR 1000 Cafe Racer

Rebuild kit includes inner spacer, 3/4" bearings, races, seals, seal spacers for rebuilding of alloy front hubs. Fits:XL 1978-1983FX 1978-1983Additional Information

Rear wheel hub bearing washer. Fits:XL 1957-1978K 1954-1956Additional Information OEM No.41195-63 UOM

Smooth speedometer drive spacer replaces drive units. Fits:XL 1973-1983FX 1973-1983Additional Information UOM1 - EA

Bearing spacer set. Fits:XL 1952-1981Additional Information OEM No.47518-52 UOM1 - SET

Chrome rear axle left side spacer has an overall length of 2".*NOTE: For 11/16" axle diameter. Fits:XL 1957-1978K 1952-1956Additional Information O

Rear wheel hub bearing tube spacer for 1963-1978 XL rear. Fits:XL 1963-1978 rearAdditional Information OEM No.41185-63

Front wheel hub bearing tube violet spacer may be used in some cast mag wheel appplications when flange is removed. Fits:FXD 1991-1999XL 1978-1999FXR 1984-1994FX 1978-1983Additional Information

Front left side axle spacer for dual disc has an overall length of 1/2". Fits:FXR 1982-1983XL 1978-1983FX 1979-1983Additional Information OEM No

Axle with flat head and threaded end has a 10-1/2" bearing surface lengthand can be used to replace a worn out or damaged axle. Threaded end measures 5/18 x 18.May be used in the Timken hubs, may...

Dust shield set for the swingarm. Fits:XL 1952-1981Additional Information OEM No.47519-52 UOM1 - SET<

Swingarm pivot bolt features a chrome finish. Fits:XL 1952-1981Additional Information OEM No.47511-52 UOM

Pivot pin nut. Fits:XL 1971-1981Additional Information OEM No.47512-74 UOM1 - EA

Pivot pin lock nut. Fits:XL 1974-1981Additional Information OEM No.47514-74 UOM1 - EA

Axle with hex head and threaded on both ends has a 12-5/8" bearing surface length and can be used to replace a worn out or damaged axle.*NOTE: For 11/16" axle diameter. Fits:XLCR 1977-1978Additional...

Right side swingarm lock nut. Fits:XL 1974-1981Additional Information OEM No.47515-74 UOM1 - EA<

The covers fit over stock cam cases on XL models. There is no need to remove cam case or disturb cams or gears.Covers are held in place by existing bolts and related hardware as supplied. For use on...

Horn cover with a black finish for high note horns. Fits:FL 1976-1984FLT 1984-1990FXST 1984-1990XL 1965-1978FX 1976-1984Additional Information

Chrome ignition system cover has a flame mesh design. Fits:XL 1971-2003Additional Information UOM1 - EA Manufa

AMF XL ignition system cover features an alloy construction with center decal applied. Cover features vertical mount holes. Fits:XL 1971-1984Additional Information

Black air flow ignition system cover. Fits:XL 1971-2003Additional Information UOM1 - EA ManufacturerV

Ignition points cover is the vertical 2-hole style featuring a black finish with a skull design. Fits:XL 1971-2003Additional Information UOM1 - EA

Ignition points cover is the vertical 2-hole style featuring a chrome finish with a skull design. Fits:XL 1971-2003Additional Information UOM1 - EA<

V-Twin - 42-1190 - License Plate Bracket Curved Laydown Style BlackDescriptionBlack curved laydown style bracket with metal backing plate mounts to 3-hole tag mount on stock fender. Fits:FLT...

Black grooved ignition points cover is vertical 2-hole style. Fits:FXST 1984-1999FLT 1984-1999XL 1970-2003Additional Information UOM1 -

Chrome grooved ignition points cover is vertical 2-hole style. Fits:FXST 1984-1999FLT 1984-1999XL 1970-2003Additional Information UOM1

Top it off in style and add a chrome touch to your bike with this tachometer cover. Fits:XL 1974-1983Additional Information UOM1 - EA

V-Twin - 42-1110 - Chrome 2-Hole Perforated Ignition System CoverDescriptionChrome 2-hole perforated ignition system cover can be mounted vertically or horizontally. Fits:FXST 1984-1998FX 1971-UPFXR...

Chrome solenoid end coverOrder roller boot separately. Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST 1986-1988Additional Information

V-Twin - 42-1009 - License Plate Bracket Curved Laydown Style Chrome BilletDescriptionChrome billet curved laydown style bracket with metal backing plate mounts to 3-hole tag mount on stock fender...

Kit includes a chrome sprocket cover to replace stock and chrome cam cover trim to fit over the existing one. Hardware is included.Designed for use on 1977-1978 XL models with kick starter and...

Kit includes a chrome sprocket cover to replace stock and chrome cam cover trim to fit over the existing one. Hardware is included.Designed for use on 1977-1978 XL models with kick starter and chain...

V-Twin - 42-0582 - Skull Design Ignition System CoverDescriptionBlack and chrome skull ignition system cover. Fits:XL 1971-UPAdditional Information

Black 12 volt delco remy regulator cover.Use existing screws. Fits:FL 1964-1969XL 1967-1978Additional Information UOM1 - EA

Generator end cover for Hitachi generator features a chrome finish. Fits:XL 1977-1984Additional Information OEM No.31599-82

Polished headlamp mount with two 1/2" holes.Headlamp bracket does not include sticker. Fits:FL 1975-1984XL 1975-1985Additional Information OEM No.<

Chrome die cast headlamp mount with two 1/2" holes.Headlamp bracket does not include sticker. Fits:FX 1975-1984XL 1975-1985Additional Information O

Generator end cover for 2-brush generator features a chrome finish. Fits:FL 1958-1969XL 1958-1981Additional Information OEM No.30131-59

Starter end cover with chrome finish for Prestolite and Hitachi starters. Fits:XL 1967-1980FL 1965-1980FXE 1973-1984Additional Information OEM N

Generator cover for 2-brush generator is body wrap type with a chrome finish. Fits:FL 1958-1969XL 1958-1981Additional Information UOM1 - EA

Volt pack cover is engineered to improve cooling for extended regulator life.Cover features chrome finish that reflects engine and exhaust heat, and is grooved to interlock with the regulator. Cover...