Super Glide Fat Bob FXEF

V-Twin black clutch cable has a casing length of 51.625" and a 58.50" overall length. Fits:FL 1968-1983FXST 1984-1985FX 1971-1983FX 1980-1986Additional Information

York 4-speed clutch cable for use with 4-speed kick starter covers.Use with kick starter covers with cable operated ball-ramp clutch release assembly. *NOTE: Uses a small hole perch type handlebar...

Black throttle cable has is 12" over stock length. Casing length is 45". Fits:FL 1974-1980FX 1974-1980XL 1974-1980Additional Information UOM

Black throttle cable with 90  elbow fittings has a casing length of 33". Cable is stock length. Fits:XL 1976-1980FL 1976-1980FX 1976-1980Additional Information

Eyelet clutch cable for 4-speed models will work with late model handlebar assemblies. Fits:FX 1968-1984FL 1968-1984Additional Information UOM1

Replica Keihin carburetor rebuild kit Fits:FXR 1982-1988FX 1979-1984FLST 1984-1988FXST 1984-1988FL 1979-1984XL 1979-1988Additional Information

Natural alloy petcock has a 90  left outlet, nut, nylon filter, screen, washer, rubber gasket and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are...

Natural alloy petcock has straight outlet with nut and includes nylon filter screen, washer and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are...

Stroker intake manifold is flat seal type. It is a replacement for all OKO and S&S B & E 1-7/8" Super carburetors. For models with a .200 longer cylinder. Fits:FL 1978-1984FX 1978-1984Additional...

Keihin carburetor Viton rebuild kit Fits:FXR 1982-1988FX 1979-1984FLST 1984-1988FXST 1984-1988FL 1979-1984XL 1979-1988Additional Information

Keihin carburetor rebuild kitSold as an 18 piece kit. Fits:FXR 1982-1988FX 1979-1984FXST 1984-1988FL 1979-1984FLST 1986-1988XL 1979-1988Additional Information

Alloy petcock with 90  right outlet and reserve position includes nut.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are made for a seated position on the motorcycle...

Nylon throttle tube for single cable throttle. Fits:FL 1974-1980FX 1974-1980XL 1974-1980Additional Information OEM No.56220-74

Keihin carburetor diaphragm pump. Fits:FXR 1982-1988FX 1979-1984FXST 1984-1988FL 1979-1984FLST 1986-1988XL 1979-1988Additional Information

V-Twin - 35-3007 - Anderson Twist Grip Assembly ChromeDescriptionDual cable type Anderson twist grip assembly with a black rubber grip set. Includes a die cast housing and billet throttle tube with a...

V-Twin - 35-3004 - Anderson Twist Grip Assembly BlackDescriptionSingle cable type Anderson twist grip assembly with a black rubber grip set. Includes a die cast housing and billet throttle tube with...

Shovelhead Keihin carburetor kit includes intake mainfold, insulator spacer, clamp, mount stud and replica Keihin carburetor.*NOTE: Order single throttle calbe and air cleaner and bracket separately...

V-Twin - 35-2031 - 47mm OKO Shorty Carburetor Kit BlackDescriptionPerformance 47mm shorty carburetor with a black finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated...

OKO 42mm flatside carburetor kit includes vertical flange adapter, rubber sleeve, air cleaner adapter, lower carburetor stud and strap bracket. *Shown installed on a 1966 flat side Shovelhead.42mm...

Black intake manifold clamp set is two piece type without seals. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information UOM1 -

Performance 47mm shorty carburetor with an alloy finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

Friction spring throttle tension screw fits 1974-2022 with single or dual throttle.Sold in a pack of 10. Fits:XL 1974-2022FXR 1982-1994FL 1974-1984FX 1974-1984FXD 1991-2017FLST 1986-2017FXST...

40mm CV carburetor kit includes a replica 40mm CV carburetor, manifold adapter, intake clamps, a late flat intake manifold seal and an adapter ring kit.Throttle is operated by single pull cable...

CV carburetor adapter kit includes 2 bolt flange, seal ring and mounting bracket with choke bracket. Will mount to stock intake manifold.Accepts OEM and replacement CV carburetor. Place carburetor...

Cv carburetor mount bracket features a natural stainless steel finish and mounts to the top of carburetor with four screws.Mounts to the 2 vertical or stock XL and Big Twin manifolds. Bracket...

2024 New Production natural alloy cast 1-7/8" intake manifol d is the flat seal type for use on OKO and S&S carburetors as a stock replacement.Machined for use with S&S and OKO carburetor...

Polished OKO hex petcock includes 22mm hex nut for installation.Includes stainless steel screen. *NOTE: Spigot faces under the body for 5/16" fuel outlet. Fits:FL 1975-1985XL 1975-1985FX...

Handlebar throttle screw kit includes plastic knob, spring and retaining ring. Fits:XL 1974-2020FL 1974-1984FX 1974-1984FXST 1984-2015FXD 1991-1997FLST 1984-2015FX 1984-1994FLT 1986-2007Additional...

V-Twin - 35-0892 - 1/4 inch Turn Throttle KitDescription1/4" turn throttle kit includes a 60" cable, hillclimber grip set and a 1" handlebar throttle assembly. Fits:FL 1976-1996XL 1976-1996FX...

Heavy duty Keihin carburetor diaphragm pump.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FL 1985-1989FX 1976-1984FXR 1982-1989Additional Information

Black intake manifold clamp set includes flat style seals and fillister screws. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information

Single handlebar throttle cable assembly with black grips.Includes 2 chrome end plugs for grips. Fits:FL 1974-1980FX 1974-1980XL 1974-1980Additional Information

Kit includes 38mm OKO flatslide carburetor with built in choke activator, spigot intake manifold, throttle cable, two bolt flange adapter and twist grip set.Kit includes seal adapters for use with...

Chrome hex petcock is rear facing and is constructed of forged brass with screen. Includes a 22mm nut for attaching male fitting on fuel tank.Designs are made for a seated position on the motorcycle...

Chrome hex petcock is down facing and is constructed of forged brass with screen. Features 3/8" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on the...

Chrome notch petcock with angle fitting and knob, features a 360  swivel high capacity elbow and includes a straight fitting, full reserve and lever control for on/off and reserve.Petcock features an...

Chrome hex petcock is down facing and is constructed of forged brass with screen. Features 3/16" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on the...

Chrome hex petcock has inward facing outlet and is constructed of forged brass with screen. Features 5/16" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on...

Sifton chrome petcock forward facing with 3/8" outlet with nut.Petcock features solid brass construction with on and off and reserve positions and screen. Designs are made for a seated position on...

Replica zinc intake manifold clamp set features fillister head screws. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information OEM No.