Super Glide Fat Bob FXEF

Zinc fork neck cup set with races installed. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information OEM No.48311-60

Chrome fork neck cup set with races installed.Sold as a pair. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information OEM No.

V-Twin - 24-0117 - Upper and Lower Zinc Dust ShieldsDescriptionSet includes both an upper and lower dust shields. Each shield is zinc and is for use with Timken style bearings.Sold as a pair...

V-Twin - 24-0114 - Upper and Lower Chrome Dust ShieldsDescriptionChrome upper and lower triple tree dust shield set is for use on Big Twin models with Timken style bearings.The lower cover is the...

V-Twin - 24-0112 - Lower Triple Tree Zinc Dust ShieldDescriptionZinc lower dust shields have an inner diameter of 51mm for fork neck cup kit. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR...

Feature built in rubber seal where bearing contacts the top of the race. This kit chrome cups and dust shields. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FLH 1949-1984Additional Information

Fork damper tube only comes in pairs.Sold as a pair. Fits:FX 1975-1983XL 1975-1983Additional Information OEM No.45409-75

Fork lower tube stop is sold in pairs.Sold as a pair. Fits:FX 1975-1983FXR 1982-1983XL 1975-1983Additional Information OEM No.454

V-Twin - 24-0089 - Fork Bearing and Seal KitDescriptionFork bearing kit includes two tapered bearings and two seals. Fits:FL 1949-UPXL 1982-UPFX 1970-UPAdditional Information

Set accepts 41mm fork tubes. Bottom tree features built in rake and rounded edges. Fork lock tab is welded to the lower tree.Spacing of the fork legs is 10" center to center. Fits:FXST 1984-1987FX...

Dura polished brake disc features a rustless finish and long service life. Compatible with all brake pads including sintered metal and OEM.Disc has a center hole inner diameter of 2". For use on...

Polished Kelsey type master cylinder complete with internals with 3/4" bore.The bolt hole distance center-to-center measures 2-1/4". Requires use of a 10mm banjo bolt, the brake line must be updated...

Kelsey type chrome master cylinder assembly with 3/4" bore.The bolt hole distance center-to-center measures 2-1/4". Requires use of a 10mm banjo bolt, the brake line must be updated to banjo bolt...

Polished Kelsey type master cylinder complete with internals with 3/4" bore.The distance between the mounting holes is 2-1/4" center to center. ...

Front section of brake line with zinc finish fits between the junction toward the rear caliper.Order rubber hose for final connection to the rear wheel cylinder or caliper assembly. ...

Kelsey Hayes type billet master cylinder has 5/8" bore with inline mount holes.This master cylinder is 3-1/8" tall and is to be used with 10mm banjo bolt. Fits:FXS 1979-1984FX 1980-1983FL...

Chrome brake caliper mount bracket for use with 10" disc. Fits:FL 1973-1980FX 1973-1980Additional Information OEM No.44166-73

Black brake caliper includes body, piston and seals for dual disc.For use with 3/8" bore master cylinder and 10" brake disc. Mounting hardware is available separately. Fits:FXR 1982-1983XL...

Conversion kit updates 1973-1981 FX, FL models from a 10" disc to an 11-1/2" disc.Kit includes a 11.5" steel drilled rear disc, chrome caliper bracket, and black painted caliper with brake pads,...

Conversion kit updates 1973-1982 FX, FL models from a 10" disc to an 11-1/2" disc.Kit includes a 11.5" stainless steel drilled rear disc, chrome caliper bracket, and black painted caliper with brake...

Kit includes a chrome rear caliper, 10" steel drilled disc, chrome bolts, chrome support bracket, anchor bar with bolts. Fits:FLH 1973-1980FX 1973-1980Additional Information

Kit includes a rear caliper, 10" steel drilled disc, bolts, support bracket, and anchor bar with bolts in a black finish . Fits:FL 1973-1980FX 1973-1980Additional Information

Hardware rebuild kit includes mount bracket, anchor arm, bolt set, mounting pin kit, rear brake pad set, caliper support.An oversized ground pin to repair elongated mount hole inthe caliper body is...

Oversize brake caliper mounting pin rebuild kit replaces stock mounting pin by boring caliper hole oversize giving a longer life to the caliper housing before replacement. Fits:FL 1973-1980FX...

Front brake pad pins for dual disc calipers. Fits:XL 1977-1983FX 1977-1983Additional Information OEM No.44162-77

Mount pin for rear brake caliper. Fits:FL 1973-1980FX 1973-1980Additional Information OEM No.44107-72

Replacement kit includes mounting stud, lock nut and washer, 2 brake pad pins and stainless steel caliper mounting bracket bushing.This kit eliminates brake squeaking, grinding, and caliper wobble...

Rebuild kit for handlebar brake master cylinder assemblies. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.4506

Hydraulic brake pedal features a stainless steel finish. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA

Brake pedal plate is hydraulic type. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA Ma

Pedal and master cylinder mount plate is for AEE hydraulic brake kit and features a zinc plated finish. Fits:FL 1941-1984FX 1973-1984Additional Information

Zinc plated brake pedal mount plate for hydraulic applications. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA

Rear banana caliper has a smooth chrome finish and is fully assembled with brake pads and all internals. Calipers accept 1/8" national pipe thread line.Includes mounting pins. Fits:FL 1973-1980...

Our Banana Caliper has a black finish with a bullseye design and is fully assembled with disc pads and all internals.Includes caliper anti-rattle kit. Caliper accepts a 1/8" national pipe thread line...

Caliper kit includes a black OE style bullseye caliper and a black steel bracket with all the internal parts. Fits:FL 1973-1980FX 1973-1980Additional Information

Kit includes 2 black calipers with brake pads and 2 zinc steel drilled discs for dual disc applications.Hardware included. *NOTE: Kit does not include anti-rattle tape or replacement bushings...

FXE brake pedal with a chrome finish. Fits:FXE 1978-1984Additional Information UOM1 - EA FinishChrome

FXE brake pedal features a zinc plated finish. Fits:FXE 1978-1984Additional Information UOM1 - EA Finish<

Chrome caliper with bracket and 11-1/2" stainless steel disc. Fits:FX 1973-1984FL 1973-1984Additional Information UOM1 - KIT

Kelsey brake plunger features a zinc finish.*NOTE: Must order clevis separately. Fits:FX 1979-1982Additional Information UOM1 - EA <