Super Glide Fat Bob FXEF

Chrome jiffy kickstand assembly includes late style mount bracket with built in spring plate, lock tab, spring, and flat bottomed forged side stand with mount hardware. Fits:FX 1971-1984EL...

Replica parkerized kickstand lock tab. Fits:FX 1971-1984EL 1936-1940FL 1941-1984UL 1938-1948Additional Information OEM No.5009

Chrome highway bar kit includes 2 plates, extension bars, and cats paw footpegs.Hardware included. Fits:FX 1971-1984Additional Information UOM1 - K

Jiffy kickstand assembly comes in a chrome finish is extended for 2" to 4" front fork. Fits:FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Male and Female end mount footpeg sets with matching shifter peg with a unique soft rubber pad to reduce vibration.Includes large female end mount footpeg set, small male end cats paw footpeg set,...

Heavy duty kickstand features 18mm outer diameter and is stock length.Kickstand is made of heat treated steel and chrome with flattened base as original. Fits:FX 1971-1984EL 1936-1940FL 1941-1984FXST...

V-Twin - 27-1589 - Footpeg Extension ChromeDescriptionChrome offset footpeg 4" extension places peg position 3-1/4" wider and 2" forward. Fits:FXST 1984-UPFX 1980-1984Additional Information

Jiffy kickstand assembly comes in a chrome finish and is stock length. Fits:FX 1971-1984EL 1936-1940FL 1941-1984Additional Information OEM No.

Chrome highway bar kit includes 2 plates, extension bars, and footpegs. Fits:FX 1971-1984Additional Information UOM1 - KIT

Extended kickstand is made of heat treated steel and chrome featuring flattened base as original. Kickstand measures 17-1/8" in length.Kickstand measures 12" from top bend to bottom bend. Fits:FX...

Forged kickstand is made of heat treated steel and chrome featuring flattened base as original. Kickstand is stock length. Fits:FX 1971-1984EL 1936-1940FL 1941-1984FXST 1984-1988Additional Information

Right side footpeg support with spline features a zinc finish. This is the straight type with 1/2" hole for fitting footpeg to FXE brake control. Fits:FX 1973-1984Additional Information

Right side footpeg support with spline features a chrome finish. This is the straight type with 1/2" peg yoke hole for fitting footpeg to FXE brake control.Support will accept 1/2" stud or yoke...

V-Twin - 27-1135 - Passenger Footboard Rubber Insert SetDescriptionPassenger footboard insert set is chrome with black inlay.**NOTE: Black rubber footboard pads and chrome rail inserts must be...

Chrome FX footpeg mount kit includes footpegs and brackets for right and left sides.Includes clevis mounts with 1/2 x 20 thread. For use with mid controls on 1973-1984 FXE models. 3/8" peg yokes are...

Chrome seat shock mount clamp set attaches around 1" tube to support dual shocks for solo seats. Fits:FX 1970-1984FL 1941-1957EL 1936-1947Additional Information

Forged kickstand and spring kit with a chrome finish.Order mount kit and hardware separately. Fits:FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Chrome kickstand mount bracket with holes in the face of the bracket, as original. Fits:UL 1938-1947FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Chrome mustache highway bar kit with cats paw footpegs.These bars are not to be used with a front engine bar. Fits:FX 1971-1984FL 1958-1984Additional Information

Chrome kickstand tab kit includes washer, acorn nut, and tab . Fits:FXST 1984-1999FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Constructed of steel and chrome plated, this adjustable kickstand stop is installed on the kickstand shaft to prevent the leg from banging into the primary case. Fits:FLST 1986-1990UL 1938-1947FXST...

Chrome kickstand mounting kit includes kickstand mount, spring, leg stop, and spring plate. Kickstand measures 11-1/2" from bend to top. Fits:UL 1938-1947FX 1971-1984EL 1936-1940FL...

Chrome kickstand mount bracket is without holes in the face of the bracket, as original. Fits:UL 1938-1947FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Chrome kickstand spring plate. Fits:FLST 1986-1990UL 1938-1947FXST 1984-1990FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Stop your kickstand from hitting your primary cases by installing this steel leg stop on your kickstand shaft. Fits:FLST 1986-2006FXST 1984-2006FX 1971-1984EL 1936-1940FL 1941-1984Additional...

V-Twin - 27-0406 - Footpeg Male Stud SetDescriptionFootpeg male stud set fits all male footpeg sets on pre-2018 applications.Fits on kick starter pedal, V-Twin #17-0624 Fits:FX 1980-UP...

Skeleton foot kickstand features constructed polished stainless steel. End is threaded for hex bolt.May require shim wedge under kickstand mount or washer on shaft. Order spring and lock tab...

Zinc plated primary footboard mounting kit includes hardware and extended rear footboard bracket for use with custom drag or muffler pipes.Kit is for use with OE type exhaust systems. *NOTE: Includes...

Zinc right side footpeg mount support is straight type.Mounting hole inner diameter measures 11/16". Fits:FX 1978-1984Additional Information OEM No.

V-Twin - 27-0272 - Steel Dimpled Footpeg KitDescriptionSteel dimpled footpeg kit featuress chrome steel pegs and include male adapter blocks with zinc finish.*NOTE: These will not fit passenger on...

ISO mount swingarm chain guard has a black finish and comes with rubber bushing and rear bracket.Can also be used on 1958-1984 FL for the lighter FX look. Fits:FX 1966-1978FL 1958-1984FXE...

Footpeg mount stud has 1/2" x 20 thread with a zinc finish. Fits:FL 1974-1984FX 1974-1984Additional Information OEM No.52683-74 <

Handlebar control kit includes master cylinder with clamp, clutch handle with clamp, switch housings and bracket in a polished finish.Switch wiring is not included. The master cylinder has a 3/4"...

Kit includes master cylinder with clamp, clutch handle with clamp, chrome switch housings, black switches, and bracket.Handlebar wiring harness and switch assembly in this kit includes wire...

Chrome contour hand lever set are designed for easy grip. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information UOM1 - SET

Polished smooth handlebar control switch coverIncludes rubber grommets in riser top vibration damper. Accepts 1/2" x 13 bolts sold separately. Fits:FL 1972-1981FX 1973-1981XL 1973-1981Additional...

Handlebar control kit includes master cylinder with clamp, clutch handle with clamp, switch housings and bracket in a chrome finish.Switch wiring is not included. The master cylinder has a 3/4" bore...

Nylon bushing for hand lever Fits:FX 1971-1984XL 1968-1987FXR 1984-1987FXST 1984-1987FLT 1979-1987FLST 1986-1987FL 1968-1984Additional Information

Polished clutch hand lever assembly.Order switch housing separately. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information UOM

V-Twin - 26-2099 - Polished Handlebar Master Cylinder AssemblyDescriptionPolished handlebar 3/4" bore master cylinder assembly includes the brake lever, stop light switch, reservoir cover, and all...