Super Glide FXE Electric Start

Rear wheel hub bearing race and seal kit includes 2 each of the bearings, race, and proper seals. Fits:FX 1973-1984 Laced WheelsFL 1973-1979 Cast WheelsXL 1979-1982 Wire or Cast WheelsAdditional...

Rear wheel hub bearing race and seal kit includes 2 each of the bearings, race, and seals. Fits:FXR 1982-1982 Laced WheelFL 1973-1982 Laced WheelFL 1980-1982 Cast WheelsFX 1973-1982 Laced...

Front wheel bearing race and seal kit includes 2 each of the bearing, race and seals. Fits:FXD 1991-1999 Front and RearFLT 1986-1999 RearFX 1973-1984 Front and RearXL 1979-1999 RearFLST 1986-1999...

Front wheel bearing, race and seal kit includes 2 each bearings, race, and seals. Fits:FX 1973-1983 Cast or Wire WheelsFLH 1973-1979 Cast WheelsFXR 1982-1983 Cast or Wire WheelsXL 1973-1983 Cast or...

Front wheel bearing, race and seal kit includes 2 each bearings, race, and seals. Fits:FL 1973-1983 Laced WheelsFL 1980-1983 Cast WheelsFX 1980-1983 Laced WheelsAdditional Information

Wheel hub bearing seal spacer Fits:FXE-80 1973-1982FXE 1973-1982FX 1973-1982FXEF 1973-1982FXEF-80 1973-1982FL 1973-1983Additional Information

Rear wheel hub bearing rebuild kit includes bearings, races, seals, snap rings, and seal spacers. Fits:FL 1973-1983 with laced rear wheelFX 1973-1983 with laced rear wheelAdditional Information

Bearing hub race has an outer diameter of 1.776". Race is manufactured to meet OEM specifications for long lasting durability and performance. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST...

Tapered bearing minimizes friction. Bearing is for a 3/4" axle. Fits:FXD 1991-1999 Front and RearFL 1973-1984 Front and RearFLT 1986-1999 RearFX 1973-1984 Front and RearXL 1979-1999 RearFLST...

Swingarm bearing and race is for 3/4" axle.The cup outer ring has a 1.781" outside diameter, cone inner ring has a .75" inside diameter. Cone and cup assembly have a .656" width. Bearing and race are...

Rebuild kit includes inner spacer, 3/4" bearings, races, seals, seal spacers for rebuilding of alloy front hubs. Fits:XL 1978-1983FX 1978-1983Additional Information

Smooth speedometer drive spacer replaces drive units. Fits:XL 1973-1983FX 1973-1983Additional Information UOM1 - EA

Kit includes zinc plated axle, spacer, and chrome nut. Fits:FL 1973-1980FX 1980-1983Additional Information OEM No.43875-73

Pyramid axle adjuster blocks.Order nut kit separately. Fits:XL 1979-1996FX 1973-1984FL 1973-1984Additional Information UOM1 - SET

Die cast chrome pyramid end caps with solid block type pull adjusters for 3/4" axles. Fits:XL 1979-1996FX 1973-1984FL 1973-1984Additional Information

Front or rear wheel hub bearing tube orange spacer. This spacer measures 4.420" overall length.For use on a steel dual flange hub. Fits:FXR 1982-1986FX 1971-1984FXST 1984-1992FLST 1986-1992Additional...

Front or rear wheel hub bearing tube white spacer. This spacer measures 4.448".For use on steel dual flange hubs. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999XL 1979-1999 RearFX...

Front or rear wheel hub bearing tube yellow spacer. This spacer measures 4.434".For use on steel dual flange hubs. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999XL 1979-1999 RearFX...

Adjuster kit includes the adjuster pill and chrome end plates. Fits:XL 1979-1996FX 1973-1984FL 1973-1984Additional Information OEM No.4

Axle adjuster bolts onlyThread size is 5/16-24. Fits:XL 1985-1996FX 1973-1984FL 1973-1984Additional Information OEM No.41570-77

Front wheel hub bearing tube violet spacer may be used in some cast mag wheel appplications when flange is removed. Fits:FXD 1991-1999XL 1978-1999FXR 1984-1994FX 1978-1983Additional Information

Front left side axle spacer for dual disc has an overall length of 1/2". Fits:FXR 1982-1983XL 1978-1983FX 1979-1983Additional Information OEM No

Zinc front axle spacer has an inner diameter of 3/4" for left side application. Spacer has an overall length of 1/2". Fits:FL 1973-1984FX 1980-1983Additional Information

V-Twin - 44-0258 - Zinc Rear Axle Nut KitDescriptionZinc axle nut kit includes a 5/8"-18 hex nut, 2 extra thick washers and 1 lock washer.For use on square swingarms. For 3/4" axles, universal. ...

Triple stepped axle with threaded end has a 10-1/8" bearing surface length and can be used to replace a worn out or damaged axle.Order nut kit separately. Fits:FL 1973-1980FX 1980-1983Additional...

Axle with hex head and a threaded end has a 12-3/8" bearing surface length and can be used to replace a worn out or damaged axle. Fits:FXB 1980-1984FXSB 1980-1984FX 1980-1984Additional Information

Axle with a hex head and a threaded end with a 11-7/8" bearing surface length and can be used to replace a worn out or damaged axle. Fits:FX 1973-1984FL 1973-1984Additional Information

Triple stepped axle with threaded end has a 10-1/8" bearing surface length and can be used to replace a worn out or damaged axle.The outer diameter of the first step down towards the threads is ...

Rebuilt kit includes spacers, bearings, races, seals, and lock tab. Fits:FX 1973-1984FL 1973-1984Additional Information UOM1 - KIT

Bearing and seal kit includes tapered bearings, races, and seals. Fits:FX 1973-1984FL 1973-1984Additional Information UOM1 - KIT

Black pivot bolt. Fits:FX 1971-1984FL 1958-1984Additional Information OEM No.47510-58 UOM1 -

Pivot spacer set.Sold in a quantity of 2. Fits:FX 1971-1984FL 1958-1984Additional Information OEM No.47517-58

Pivot bolt is 8". Fits:FX 1971-1984FL 1958-1984Additional Information OEM No.47510-58 UOM1 -

Self-tapping raw swingarm pivot bolt is .025" oversize. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - EA

Rotary to ratchet top conversion kit includes a complete ratchet top, Andrews shifter fork kit and 1/4" x 20 Thread screw kit, with Vent screw. This is a complete assembly.Ratchet top conversion...

One of our most popular items is this chrome inner primary cover with the hole for the mid shift control lever as OEM. It features a 9-hole pattern for the outer cover to bolt to. Includes sealed...

Chrome dress up kit comes with chrome parts and hardware for installation.Kit is for Shovelhead 4-speed chain drive kick and electric start models. Kit includes chrome rocker box cover set, hex nut...

Inner primary cover features a natural cast finish that is machined as an exact replacement. Cover is for use with 4 speed models.This 8 hole cover is reinforced and stronger than the original. Inner...

Finned kick starter cover with cast finish, bushings and seal installedOrder kick start spring stud separately. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

One of our most popular items is this polished inner primary cover with the hole for the mid shift control lever as OEM. It features a 9-hole pattern for the outer cover to bolt to. Includes the...