1981

Right side speedometer drive adapter kit includes 2240:60 ratio right side speedometer drive, chrome hub cover and chrome axle with nuts.This adapter kit is for single disc spoke hubs and cast wheels...

Choke cable includes black vinyl casing and inner wire.Order knob, mounting nut and choke cable nut kit separately. Fits:FXST 1984-1989FL 1979-1984FLST 1989-1989Additional Information

Inner carburetor choke wire. Fits:FX 1973-1984FL 1979-1980 Early 1980Additional Information UOM1 - EA

Stainless steel clutch cable features heavy duty constructio n designed for reliability and longer service. This cable ha s a casing length of 52.56 Fits:FL 1968-1983FXST 1984-1985FX 1971-1983FXWG...

Black clutch cable features a heavy duty construction, designed for reliability and longer service. The cables casing length is 48" with a stock outer diameter. Fits:FX 1971-1984FL...

Black clutch cable feature heavy duty construction designed for reliability and longer service. This cable has a 48" casing length and is 52.5625" in overall length. Fits:FLH 1970-1984FXEF...

Black clutch cable has a casing length of 51.06" with adjuster and is 4" over stock. Total length is 58-1/2". Fits:XL 1971-1985Additional Information OEM No.

Black clutch cable feature heavy duty construction designed for reliability and longer service. This cable has a casing length of 47-7/8" with an overall length of 54-1/2". Fits:XL...

Black clutch cable feature heavy duty construction designed for reliability and longer service. This cable has a 56" cas ing length and an overall length of 62.625". Cable is 4" ove r stock. Fits:FL...

Black clutch cable features heavy duty construction designed for reliability and longer service. The cables casing length is 48 Fits:FX 1971-1984FL 1968-1984Additional Information <

V-Twin black clutch cable is 6" over stock length. Casing is 57" with an overall length of 65".Features a heavy duty construction designed for reliability and longer service life. Fits:FL...

V-Twin black clutch cable has a casing length of 51.625" and a 58.50" overall length. Fits:FL 1968-1983FXST 1984-1985FX 1971-1983FX 1980-1986Additional Information

York 4-speed clutch cable for use with 4-speed kick starter covers.Use with kick starter covers with cable operated ball-ramp clutch release assembly. *NOTE: Uses a small hole perch type handlebar...

V-Twin black throttle cable has a 45  elbow fitting. This cable has a casing length of 37.44 Fits:FXST 1984-1989FLH 1981-1984FLST 1986-1989FX 1981-1984Additional Information

V-Twin black idle cable has a 45  elbow fitting. This cable has a casing length of 37.44" with an overall length of 41". Fits:FXST 1984-1989XL 1981-1985FLH 1981-1984FXR 1982-1989FLST 1986-1989FX...

Eyelet clutch cable for 4-speed models will work with late model handlebar assemblies. Fits:FX 1968-1984FL 1968-1984Additional Information UOM1

Dual handlebar throttle cable assembly with black cables, grips, and chrome end plugs.Cable has a casing length 36" and is 40" overall. For use with Keihin butterfly style carburetors. Fits:FXST...

Replica Keihin carburetor rebuild kit Fits:FXR 1982-1988FX 1979-1984FLST 1984-1988FXST 1984-1988FL 1979-1984XL 1979-1988Additional Information

Natural alloy petcock has a 90  left outlet, nut, nylon filter, screen, washer, rubber gasket and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are...

Natural alloy petcock has straight outlet with nut and includes nylon filter screen, washer and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are...

Stroker intake manifold is flat seal type. It is a replacement for all OKO and S&S B & E 1-7/8" Super carburetors. For models with a .200 longer cylinder. Fits:FL 1978-1984FX 1978-1984Additional...

Keihin carburetor Viton rebuild kit Fits:FXR 1982-1988FX 1979-1984FLST 1984-1988FXST 1984-1988FL 1979-1984XL 1979-1988Additional Information

Keihin carburetor rebuild kitSold as an 18 piece kit. Fits:FXR 1982-1988FX 1979-1984FXST 1984-1988FL 1979-1984FLST 1986-1988XL 1979-1988Additional Information

Alloy petcock with 90  right outlet and reserve position includes nut.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are made for a seated position on the motorcycle...

Keihin carburetor diaphragm pump. Fits:FXR 1982-1988FX 1979-1984FXST 1984-1988FL 1979-1984FLST 1986-1988XL 1979-1988Additional Information

Shovelhead Keihin carburetor kit includes intake mainfold, insulator spacer, clamp, mount stud and replica Keihin carburetor.*NOTE: Order single throttle calbe and air cleaner and bracket separately...

V-Twin - 35-2031 - 47mm OKO Shorty Carburetor Kit BlackDescriptionPerformance 47mm shorty carburetor with a black finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated...

V-Twin - 35-2001 - Linkert Carburetor Float BowlDescriptionLinkert carburetor float bowl fits 1936-up Big Twin overhead valve models. Fits:FL 1936-UPEL 1936-UPE 1936-UPAdditional Information

OKO 42mm flatside carburetor kit includes vertical flange adapter, rubber sleeve, air cleaner adapter, lower carburetor stud and strap bracket. *Shown installed on a 1966 flat side Shovelhead.42mm...

Black intake manifold clamp set is two piece type without seals. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information UOM1 -

Performance 47mm shorty carburetor with an alloy finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

40mm CV carburetor kit includes a replica 40mm CV carburetor, manifold adapter, intake clamps, a late flat intake manifold seal and an adapter ring kit.Throttle is operated by single pull cable...

Keihin carburetor jet replacement. Fits:XL 1976-1987FXST 1986-1992FL 1976-1980FLST 1986-1992Additional Information UOM1 - EA

Keihin carburetor air neddle. Fits:XL 1976-1987FXST 1986-1992FL 1976-1980FLST 1986-1992Additional Information UOM1 - EA

CV carburetor adapter kit includes 2 bolt flange, seal ring and mounting bracket with choke bracket. Will mount to stock intake manifold.Accepts OEM and replacement CV carburetor. Place carburetor...

Replica butterfly type Keihin carburetor accepts all replacement OEM components. Complete carburetor assembly includes updated needle and jet with fuel passages.Keihin carburetor is single cable...

Cv carburetor mount bracket features a natural stainless steel finish and mounts to the top of carburetor with four screws.Mounts to the 2 vertical or stock XL and Big Twin manifolds. Bracket...

2024 New Production natural alloy cast 1-7/8" intake manifol d is the flat seal type for use on OKO and S&S carburetors as a stock replacement.Machined for use with S&S and OKO carburetor...

Keihin carburetor rebuild kit contains all components for a professional accelerator pump rebuild.Includes 59.5mm Keihin accelerator pump rod for valve. Fits:XL 1976-1987FXD 1976-1992FLST...

Solid stainless steel intake manifold clamp kit is flexible for a form fit around the seals. Includes Vtwin's original "Red" flat seals. Fits:XL 1978-1985FL 1978-1984Additional Information