1981

Polished brake hand lever. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.45016-72

Chrome brake hand lever Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.45016-72

Smooth chrome handlebar control switch housing.Housing accepts screw in throttle and idle cables. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information

Chrome vertical switch housing only, will also accepts factory rocker switches and buttons.. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information

Chrome clutch hand lever bracket.Order switch housing separately. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information OEM No.<

Pivot pin and bushings for hand lever. Fits:FX 1971-1984XL 1968-1987FXR 1984-1987FXST 1984-1987FLT 1979-1987FLST 1986-1987FL 1968-1984Additional Information

Master cylinder assembly includes the brake lever, stop light switch, reservoir cover and all internal components. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information

Polished handlebar 3/4" bore master cylinder assembly includes the brake lever, stop light switch, reservoir cover, and all internal components assembled. Fits:XL 1972-1981FL 1972-1981FX...

Master cylinder has a 3/4" bore and includes the brake lever, stop light switch, reservoir cover, and all internal components. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information

V-Twin - 26-0453 - Cutout Design Riser Top Clamp BlackDescriptionBlack cutout design handlebar top clamp mounts with 4 5/16" screws on existing risers. Fits:FXST 1984-UPFXR 1982-1994FX 1973-1984XL...

V-Twin - 26-0451 - Cutout Design Riser Top Clamp ChromeDescriptionChrome cutout design handlebar top clamp mounts with 4 5/16" screws on existing risers. Fits:XL 1974-UPFX 1985-UPFX...

V-Twin - 25-2132 - 1-1/8 inch Riser Set ChromeDescriptionChrome 1-1/8" riser set with finned riser cap and screws.Use with 1/2" x 13 mount bolts which are sold separately. Fits:FX 1977-1984XL...

Chrome 4-1/4" ribbed style straight riser kit includes riser cap and screws.Use with 1/2" x 13 mount bolts which are sold separately. Fits:FXST 1984-2006FX 1980-1984Additional Information

1" drag handlebar without indents and without knurls features a black finish with 30  bends. Fits:XL 1974-1981FL 1974-1981FX 1974-1981Additional Information

Chrome 41mm fork boot cover set installs over stock rubber fork boot by the interlocking springs supplied with the kit, to securely hold boot covers in place.Sold as a set of 2. Fits:FXDWG...

Cover set is stainless steel and 6-5/8" overall length. Use with 1/4-28 x 5/8" allen socket cap. Mount holes measure 1/4"x 28 thread.Use 1/4"-28 x 5/8" allen socket cap. Fits:FLT 1980-2013FL...

Tweek bar polished 41mm fork brace is a 2 piece design which clamps directly to fork tube.The distance center to center measures 10". Fits:FXDWG 1999-2005FXWG 1980-1986FXST 1984-2013FLH...

Stainless steel fork slider cover set is stock length 6-5/8" and mount holes measure 1/4"x 28 thread.Use 1/4"-28 x 5/8" allen socket cap. Fits:FLH 1949-1984Additional Information

Cover set is chrome and 6-5/8" overall. Mount holes measure 1/4"x 28 thread.Use with 1/4-20 x 5/8" allen socket cap. Fits:FLT 1980-2013FL 1949-1984FLST 1986-2017Additional Information

Fork assembly 41mm with chrome sliders for single disc applications.Fork assembly 41mm with chrome sliders is single disc model which accepts large banana caliper to accept 10" disc. Assembly...

Fork neck cup kit includes 2 chrome cups, 2 tapered bearings , and 2 dust shields.Used to convert ball bearing style cups to Timken tapered type. Fits:XL 1978-1981Additional Information

Stainless steel top triple tree cover has a measurement of 3-1/2" center to center. Fits:FL 1960-1984Additional Information OEM No.45741-60

Chrome handlebar riser cover features a hole for steering damper control. Fits:FL 1980-1984Additional Information OEM No.56589-79

This FXWG lower leg and 41mm fork tube set has 1980-1983 polished lower legs that has no reflector boss and has early style horseshoe type fender mounts.2 lower legs and 2 fork tubes only. Does not...

41mm Chrome fork boot cover are die cast fork boots for a snug fit over the stock rubber fork wiper boot. Fits:FXST 1984-1990FX 1980-1986Additional Information

Cover set is chrome and 6-3/8" overall.Use with 1/4-28 x 5/8" allen socket cap. Fits:FLT 1980-2013FL 1949-1984FLST 1986-2017Additional Information

Assembly includes a dust cover set, black lower tree, polished top tree and axle kit. Fits:FXE 1977-1983Additional Information UOM1 - KIT

41mm FLH adjustable single disc fork assembly includes polished legs with a black triple tree. Forks uses single disc left side banana caliper and 10" rotor. Fits:FL 1973-1984Additional Information

Set features upper and lower adjustable trees with tabs and bolt.Lower tree has 2 positions for rake, as located by 2 tabs with pins. Includes tabs for slider covers. *NOTE: Order rubber handlebar...

Chrome billet 3  rake ball milled triple tree set includes top nut and has 2 grooves for 41mm fork tubes.Order bearings, cone nut, and dust covers separately. *Note: Can also be...

V-Twin - 24-2024 - 41mm Fork Assembly with Chrome Sliders 21 inch WheelDescriptionHard chrome wide glide fork assembly with chrome sliders are assembled with internal components.Includes a 21" chrome...

V-Twin - 24-2023 - 41mm Fork Assembly with Chrome Sliders 21 inch WheelDescriptionHard chrome wide glide fork assembly with chrome sliders are assembled with internal components.Includes a 21" chrome...

V-Twin - 24-2011 - 41mm Fork Assembly with Chrome Sliders 21 inch Wheel DualDescriptionFXWG style dual disc fork, wheel and caliper kit includes leg assembly, calipers, discs, and a 21" chrome wheel...

V-Twin - 24-2000 - 41mm Fork Assembly with Polished Sliders 21 inch Wheel DualDescriptionFXWG style dual disc fork, wheel and caliper kit features stock length leg assembly, chrome triple trees,...

V-Twin - 24-1964 - 7 inch Headlamp Cowl Kit BlackDescriptionBlack 7" cowl kit available with complete light assembly with rim and includes matching top handlebar cover and Beck bulb.Kit is made out...

V-Twin - 24-1962 - Fork Slider Black Cover SetDescriptionBlack powder coated cover set for the fork sliders are 6-5/8" long. Mount holes measure 1/4"x 28 thread. Fits:FLH 1949-1984Additional...

V-Twin - 24-1960 - 7 inch Headlamp Cowl KitDescriptionBlack powder coated 7" headlamp cowl kit with 55/60 watt H-4 unit. Screws are stainless steel. The cowl and handlebar cover are black powder coat...

1" tapered Spring Fork neck cup is zicad plated. Kit includes Spring Fork shape neck cup, ball bearings, upper and lower races, and chrome top nut with dust cover pressed on.Timken style bearings...

25-1/2" Spring Fork kit is black with chrome springs. Spring Forks are offset. Top triple tree is machined chrome design without ears. Use post risers with stud to top of rear fork legs. Legs thread...

24" Spring Fork kit is chrome with black springs. Spring Forks are offset. Top triple tree is machined chrome design without ears. Use post risers with stud to top of rear fork legs. Legs thread are...