1981

Drag Specialties - Chrome Outer Primary Cover - fits '70-'84 FL Drag Specialties outer primary kit is just what you need for your Harley Davidson if you're looking to switch it up a bit. Made from durable aluminum, this cover can withstand just about...

Drag Specialties - Predator Seat fits '54-'84 FX/FL/FLH &'80-'84 FXWG This low profile predator seat is a sleek looking seat and is molded with polyurethane foam promoting supreme comfort. Made with black vinyl and smooth stitching, this seat is...

All Balls Racing - Swing Arm Bearing Kit fits '58-'85 Harley Big Twin Models (Except Softail) Features Contains all of the bearings, shafts, seals, and bushings required to build a swing arm to factory specs Manufactured from 52100 bearing...

Colony - 8107-16 Cadmium Cylinder Base Nuts and Washers fits '29-'52 WL, '57-'85 XL, '32-'73 G Models Cadmium stock cylinder base set includes 8 nuts & washers. Fitment: WL 1929-1952 XL 1957-1985 G 1932-1973

Colony - 8170-10 7/16" x 3/4" x 1/8" Replica Steel Washer fits '71-'84 FX, '57-'85 XL, '48-'84 FL Models Rebuilding the heads on your Shovelhead? Use our cadmium headbolt washer kits from Colony Motorcycle Products. They measure 13/32 X 11/16 X 1/32...

Belt Drives Ltd. - Kevlar Clutch Kit fits:'68 - 'E84 Big Twins Clutch plates are made of 6061-T6 or high tempered steel with Belt Drives Ltd. race proven kevlar material. Each plate design was tested so that the maximum performance is achieved...

Available for 12V applications in a black finish Updated end plate has an extra set of mounting holes to align the fins on the regulator with the fins on the engine If you have purchased a Cycle Electric generator since 1984 it may have the...

Custom Cycle Engineering - Swingarm Retrofit Kit fits '99-'01 FLT/​FLHT/​FLHR Models Features: Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring models No need to alter transmission housing Will require the purchase of a...

Custom Cycle Engineering - Swingarm Retrofit Kit w/ Pivot Shaft fits '99-'01 FLT/​FLHT/​FLHR Models Features: Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring models No need to alter transmission housing Will require the...

Custom Cycle Engineering - 41 mm Wide Glide Tweek Bar - Chrome Features: Original Randy Smith design As in the good old days with extended front tubes, the need for a tweek bar is here again Vast improvement over the tweek bars used in the 60s and...

All open box items are non-returnable and final sale due to their discounted nature. This item has been previously returned, item is new, however could be missing the original packaging or the packaging has been opened. Tags, manuals, or installation...

All open box items are non-returnable and final sale due to their discounted nature. This item has been previously returned, item is new, however could be missing the original packaging or the packaging has been opened. Tags, manuals, or installation...

All open box items are non-returnable and final sale due to their discounted nature. This item has been previously returned, item is new, however could be missing the original packaging or the packaging has been opened. Tags, manuals, or installation...

All open box items are non-returnable and final sale due to their discounted nature. This item has been previously returned, item is new, however could be missing the original packaging or the packaging has been opened. Tags, manuals, or installation...

Uni Filter - Air Filter fits '80-'82 FLT, '82-'83 FXR, 'L78-'82 Sportster 1000, 'L78-'84 FX, FL & FLH Models (OEM #29255-78) Features: Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing...

Uni Filter - Air Filter fits '83-'85 Sportster 1000,  '66-'E73 Sportster 900, 1000, '67-'E75 FX, FL & FLH Models (OEM #29036-72) Features: Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still...

Drag Specialties - 3-1/4" Chrome Magnetic Ring Oil Filter With Nut fits '86-'22 Sportster (Except RH Sportster), 09-12 XR1200/X Models (OEM #63806-83, 63796-77A) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed...

Drag Specialties - 2-1/4" Chrome Magnetic Ring Oil Filter With Nut fits 'L82-'86 FX/FL, '80-'E85 Sportster Models (OEM #63782-80A, 63810-80) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed with a magnetic ring...

Drag Specialties - Oil Filter with Nut fits 'L82-'84 FLH, 'L82-'86 FX/​FXWG, '80-'E84 Sportster Models (OEM #63782-80A, 63810-80) Features: High-quality spin-on filters are a dependable replacement for most Harley-Davidson models Includes a 17 mm...

Drag Specialties - Paper Oil Filter with Spring fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #63835-87T, 63837-92T, 6383940-53) Features: High-quality drop-in oil filter Fitment 1982 Harley-Davidson Super Glide II...

Drag Specialties - 2-1/4" Chrome Magnetic Ring Oil Filter fits 'L82-'86 FX/FL, '80-'E85 Sportster Models (OEM #63782-80A, 63810-80) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed with a magnetic ring in center...

Drag Specialties - 3-1/4" Chrome Magnetic Ring Oil Filter fits '86-'22 Sportster (Except RH Sportster), '09-'12 XR1200/X Models (OEM #63806-83, 63796-77A, 63805-80A) Features: High-quality chrome spin-on-style oil filters Magnetic filters are...

Drag Specialties - Paper Oil Filter fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #53839-59, 63840-53) Features: High-quality drop-in oil filter Fitment 1981-1982 Harley-Davidson Electra Glide Classic FLH - Notes: 1982Fits...

Drag Specialties - Oil Filter fits '86-'22 Sportster (Except RH Sportster), '09-'12 XR1200/X Models (OEM #63806-83, 63796-77A, 63805-80A) Features: High-quality spin-on filters are a dependable...

Drag Specialties - Oil Filter fits 'L82-'84 FLH, 'L82-'86 FX/​FXWG, '80-'E84 Sportster Models (OEM #63782-80A, 63810-80) Features: High-quality spin-on filters are a dependable replacement Fitment 1985 Harley-Davidson Fat Bob...

Avon - Memory Foam Cable Throttle Grips Features: The softest, most durable, chemical resistant grips on the market today A true vibration dampening grip 4.600" inside length Made in the U.S.A. Fitment 2018-2021 Harley-Davidson Iron...

V-Twin - Chrome Rear Exhaust Bracket fits '80-'03 Sportster Model (OEM #65599-80D) Chrome rear exhaust bracket is for 1980-2003 XL models Fitment: XL 1980-2003

V-Twin - Battery Top Cover and Strap Kit fits '73-'84 FXE Electric Start Model Kit includes proper cover and hold down strap for electric start models. Fitment: FXE 1973-1984 Fits electric start

V-Twin - Chrome Battery Carrier Kit fits '80-'84 FXE, '81-'84 FLHS-80 Models (OEM #66191-80) Battery carrier kit fits stock frames with bracket and ISO mounts included as required. Unit is chrome plated. Order battery top cover and strap kit...

Sifton - 22mm Brass Petcock fits '75-'06 FX, '75-'85 FL, '75-'03 Sportster Models Sifton petcock with a 22mm nut, accepts a 5/16" fuel line. Knob turns on-off. Does not include reserve feature. Petcock accepts 1/4 or 5/16" fuel line. These fuel...

Motorshop - Alternator Rotor Puller Tool fits '91-'06 FXD, '84-'94 FXR, '86-'06 FLST Models Alternator rotor puller tool Fitment: FL 1971-1984 FLST 1986-2006 FXST 1984-2006 FX 1971-1984 FXD 1991-2006 FXR 1984-1994 FLT 1979-1996

S&S Cycle - HI-4N Ignition Module Kit fits '70-'99 Big Twin Models Features: Updated version of the popular Crane HI-4 ignition More power than the stock ignition Single-fire and dual-fire function built into a single module All-metal housing...

S&S Cycle - Billet Oil Pump fits '70-'91 Big Twin Models Features: Kit includes an oil pump with cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check...

S&S Cycle - Solid Lifter Conversion Kit fits '66-'84 Shovelhead Model Features: Converts stock hydraulic lifters to adjustable solids Kit includes four nonadjustable steel pushrods, four adjustable inserts and instructions Made in the U.S.A...

S&S Cycle - Valve Spring Kit fits '48-'84 Big Twin Models Features: To be used with cams with up to .550" lift Includes springs and aluminum top retainers 140-lb. seat pressure Must allow additional rocker clearance for 48-65 Panheads Made in...

S&S Cycle - Tappet Alignment Tool fits 'L76-'17 Big Twin Models (Except M-Eight) Features: Big Twin Evolution tappet blocks do not have counter-bored bolt holes; therefore, when a tappet block is removed (or even just loosened) it should be...

Belt Drives Ltd. - Extra Plate Clutch Kit fits '41-'E84 Big Twin Models Features: Four tempered steel drive plates also included Clutch plates are 20% wider than stock for improved clutch engagement and holding Both kit clutch plate stack height...

Belt Drives Ltd. - 2" Open Belt Drive Kit fits '70-'78 Big Twin Models Features: Ball-bearing lockup clutch provides approximately 60% more surface contact area than the stock clutch for smooth, sure power transfer Kit includes motor plate, starter...

Belt Drives Ltd. - 1-5/8" 4-Speed Belt Drive fits '79-'E84 Big Twin Models Features: 1-1/2" and 1-5/8" kits include front pulley, belt, clutch hub, clutch basket and aramid clutch set (consists of two half plates, four full plates and five steel...

Belt Drives Ltd. - 2" Shorty Belt Drive fits '70-'78 Big Twin Models Features: Designed for electric start applications (use 90-06 style starter) Kit includes starter housing, BDL ball-bearing lockup clutch assembly with ring gear, starter gear...