Electra Glide Sport FLHS

V-Twin - 24-0624 - Dust Shield Lower ChromeDescriptionChrome lower dust shield. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR 1982-1984FXR 1985-1994FLST 1986-UPXL 1982-2003FLT 1979-UP<

V-Twin - 24-0618 - Upper Triple Tree Dust Shield ChromeDescriptionUpper triple tree dust shield features a chrome finish. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR 1982-1984FXR...

Zinc fork seal washer is for FL models. Fits:FLT 1979-1983FL 1977-1984FX 1980-1983Additional Information OEM No.45844-77

V-Twin - 24-0599 - 41mm Fork Tube Plug KitDescriptionTapered style Glide fork plug kit.Includes tapered style fork tube plugs and matching filler cap plugs. Sold as a pair. Fits:FXST 1984-UPFLST...

Fork assembly with polished sliders.Includes stock length tubes, stainless slider covers, chrome triple trees, with lower tree with pad, lock tab, and internals. Also includes axle and nut, neck...

Fork tube assembly with chrome sliders include springs and all internal components installed with a total length of 27-5/8".Features hard chrome fork tubes, chrome sliders, springs and 1977-1984 type...

V-Twin - 24-0517 - Dual Disc 41mm Fork Slider AssemblyDescriptionDual disc assembly features chrome sliders with springs, hard chrome fork tubes and components.Assembly is for 11" dual disc...

Polished cowl kit includes top handlebar clamp cover, complete headlamp assembly with chrome rim and spotlamp, signal lamp set and hardware necessary for installation.*Note: UPS may consider this...

Chrome cowl kit includes top handlebar clamp cover, complete headlamp assembly with chrome rim and spotlamp, signal lamp set and hardware necessary for installation.*Note: UPS may consider this part...

Polished 7" cowl kit includes 7" headlamp unit, H-4,polished cowl set, handlebar clamp cowl cover, outer headlamp rim, and hardware. Cowl is aluminum.*Note: UPS may consider this part as packaged...

Chrome 7" cowl kit available with complete light assembly with rim and includes matching top handlebar cover.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the...

Showa kit includes damper tubes with rings, screws, washers, lower stops, slider seal washers, and retaining rings for both sides.Length of the tube without the bolt is 8-7/16". Fits:FL...

Chrome lower triple tree with lock tab. Triple trees accept 41mm fork tubes on 1949-1984 FL models. Fits:FLH 1949-1984Additional Information OEM No.45700

Fork tube set is 4" over stock with a total length of 24-7/8". Stock length is 20-7/8".Before installing, compare old and new tubes. Be sure the stock top plug threads into the new fork tubes. Sold...

Fork tube set is 2" over stock with a total length of 22-7/8 ". Stock length is 20-7/8".Before installing, compare old and new tubes. Be sure the stock top plug threads into the new fork tubes. Sold...

Fork tube set is 20-7/8" stock length.Before installing, compare old andnew tubes. Be sure the stock top plug threads into the new fork tubes. Sold as a pair. ...

Handlebar riser chrome cover is for the cowl top opening. It has a smooth style finish. Fits:FL 1980-1984Additional Information OEM No.56590-79

Kit includes cups, races, 1" bearings, and dust shields.Sold as a pair. Fits:FL 1948-1984Additional Information UOM1 - SET

The cone nut has a thin profile and allows use of outer covers and cowls. Fits:FLH 1949-1984Additional Information UOM1 - KIT

Chrome fork neck cup set with stop. Fits:FX 1971-1984FL 1949-1984FXST 1986-1999Additional Information UOM1 - SET

Zinc plated mega neck cup set includes bearings and races.The diameter of the part that goes into the frame measures 1-5/16". Fits:FL 1949-1984Additional Information

Neck cup kit includes races, bearings, neck cups, and pieces for entire installation on Big Twins and custom frames which accept press in neck cups.Has a built in stop and allows the turning radius...

Kit includes a chrome cup set, bearing set, dust shields, pins and a built in fork stop.Kit replaces the existing removable cups to provide a 3  rake when installed. Raked neck bearing and rake kits...

Kit includes the cup set with an outer diameter of 1-1/4", tapered bearing set, and dust shields without fork stop on the neck cup for 1" stem.Replaces existing removable cups to provide a 3  rake...

Zinc bearing adjusting nut for the triple tree Fits:FXST 1984-1999FL 1960-1984FLST 1986-1999Additional Information OEM No.48330-48B

Kit includes a cup set, tapered bearing set, and dust shields for 1" necks.Replaces the existing removable cups to provide a 3  rake when installed. Fits:FX 1971-1984FLH 1949-1984FXST...

Lower fork damper tube stop is for Big Twin models.Sold as a pair. Fits:FLST 1986-2006FLT 1979-2005FL 1977-1984FX 1980-1983FXST 1984-2005Additional Information

7" cowl set is stamped and die cast replica in polished finish.The overall length from top to bottom is 8-3/4" and the distance is 6-5/8" from center to center of the holes. The width between the...

Fork neck cup and bearing kit has races installed and features a chrome finish. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information

7" cowl set is die cast replica in chrome finish.Sold as a pair. ...

Fork steering damper kit with adjusting knob.Kit includes alloy fork steering damper knob, fork steering damper plate, fork damper plate with pin, damper plate with hole, triple tree top nut,...

Alloy fork steering damper knob. Fits:FL 1960-1984Additional Information OEM No.46746-52 UOM1 - EA

Kit includes lock washer and nut. Fits:FXST 1984-1999FL 1960-1984FLST 1986-1999FX 1980-1986Additional Information OEM No.45718

Chrome fork slider cover set is stock length 6-5/8". Mount holes measure 1/4"x 28 thread.Sold as a pair. Use 1/4"-28 x 5/8" allen socket cap. Fits:FLH 1949-1984Additional Information <

V-Twin - 24-0186 - Chrome Fork Tube Cap Non-VentedDescriptionFork tube cap is non-vented with a thread size of 5/8" x 18 and has a domed top.Sold as a pair. Fits:FXWG 1980-1986FXST 1984-UPFLST...

Zinc fork stem nutThread is 1"-24. Fits:FXST 1984-1999FL 1960-1984FLST 1986-1999FX 1980-1986Additional Information OEM No.

Fork steering damper plate with tab Fits:FLH 1949-1984Additional Information OEM No.46730-48 UOM1 - E

Fork steering damper plate with hole Fits:FLH 1949-1984Additional Information OEM No.46718-48 UOM1 -

Fork slider weld on tabs are to restore FLH Glide legs to accept fenders.Must be welded on to stock or turned down legs. Fits:FLH 1949-1984Additional Information

Nylon fork tube rings is 4 pieces.Set of four. Fits:FLST 1986-2005FLT 1979-2005FL 1977-1984FX 1980-1983FXST 1984-2005Additional Information