Tour Glide FLT

Hydraulic brake pedal features a stainless steel finish. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA

FXRP brake pivot is made of natural aluminum and is for use with footboards. Fits:FXRP 1988-1991FLHT 1980-1985FLT 1980-1985Additional Information

Caliper piston and seal kit includes square seal ring, for use on 1981-1984 FL caliper body. Fits:FL 1981-1984Additional Information UOM1 - KIT

Brake pedal plate is hydraulic type. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA Ma

Pedal and master cylinder mount plate is for AEE hydraulic brake kit and features a zinc plated finish. Fits:FL 1941-1984FX 1973-1984Additional Information

Zinc plated brake pedal mount plate for hydraulic applications. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA

Banana Caliper has smooth chrome finish and is fully assembled with disc pads and all internals.Caliper accepts a 1/8" National Pipe Thread line. Banana front calipers uses different pistons than the...

Our banana caliper has a black finish with a bullseye design and is fully assembled with disc pads and all internals Caliper accepts 1/8" national pipe thread line.Banana front calipers uses...

Sprocket bolt lock tab for 5 bolt sprockets is stainless steel. Fits:FL 1973-1984Additional Information UOM1 - EA

V-Twin - 23-1335 - Grate Brake Pedal Pad Large ChromeDescriptionGrate style brake pedal pad is the large type featuring a chrome plated finish. Surface has raised knubs for better grip and...

V-Twin - 23-1334 - Grate Brake Pedal Pad Large BlackDescriptionGrate style brake pedal pad is the large type featuring a black finish. Surface has raised knubs for better grip and self-cleaning...

V-Twin - 23-1328 - Grate Brake Pedal Pad Large BronzeDescriptionGrate style brake pedal pad is the large type featuring a bronze plated finish. Surface has raised knubs for better grip and...

Chrome caliper with bracket and 11-1/2" stainless steel disc. Fits:FX 1973-1984FL 1973-1984Additional Information UOM1 - KIT

Zinc rear hydraulic brake pedal mount plate.Requires a Kelsey Hayes type master cylinder. Fits:FL 1979-1984Additional Information UOM1 - EA

Rear brake pedal features a zinc finish.Requires a Kelsey Hayes type master cylinder. Fits:FL 1979-1984Additional Information UOM1 - EA

Brake caliper mount pin with acorn nut. Fits:FX 1973-1984FL 1973-1984Additional Information UOM1 - EA

Caliper brake pad pins.Sold as a set of 2. Fits:FX 1973-1984FL 1973-1984Additional Information UOM1 - SET

Brake spring stud features a chrome finish.Stud features a 5/16 x 18 thread. Fits:FL 1970-1984Additional Information UOM1 - EA

Brake pedal plate features a chrome finish.Requires a Kelsey Hayes type master cylinder. Fits:FL 1979-1984Additional Information OEM No.42480-79

Features a fine finish ground surface and is interchangeable with stock discs.Disc is .390" thick. For use on models with cast or wire wheel with bolt kit sold separately. Fits: FLT 1979-1984 FLH...

Chrome brake pedal plunger. Fits:FL 1979-1985Additional Information OEM No.42333-79 UOM1 - EA

Conversion kit updates 1973-1982 FX, FL models from a 10" disc to an 11-1/2" disc.This kit includes a 11.5" drilled zinc plated steel brake disc, mount bolts, and the dual aluminum anodized piston...

Conversion kit updates 1973-1982 FX, FL models from a 10" disc to an 11-1/2" disc.This kit includes a 11.5" drilled brake disc in stainless steel, mount bolts, and the dual aluminum anodized piston...

Chrome heavy duty kick starter kit features smooth thick wall kick cover and heavy duty kick starter arm. Kit is partially assembled.Requires the use of a wafer type release bearing kit. Fits:UL...

Kit is equipped for models powered by Shovelhead engines with hydraulic brake system.Includes brake pedal spring, brake line support foot brake pedal and plunger, Kelsey Hayes foot peg mount stud,...

Includes mount bracket with bushings installed, pedal, spring, cover and all friction components.The clutch pull rod connects to the arm on the pivot shaft. *NOTE: The rod must be ordered separately...

Chrome shifter control kit.Allows 1 down and 3 up shifting and the use of footpegs or footboards. Order complimenting forward brake control separately. ...

Daniel Boone shifter kit for the left side on ratchet top 4 speed models. Fits:FL 1941-1984Additional Information UOM1 - KIT

Daniel Boone forward control kit with rubber includes right side hydraulic pedal assembly, left side shifter, rubber brake pedal peg and Cat's Paw rubber covered footpeg set.Accepts Kelsey type...

Chrome heavy duty kit features a smooth thick wall kick starter cover and heavy duty forged "thick" beefy kick starter arm. Kit is as shown, unassembled.Requires the use of a wafer type release...

Daniel Boone chrome shifter pedal without rod for left side mounting. Accepts stock kickstand assembly. For 4 or 5 speed application.NOTE: Rod not included, order separately. Fits:FXST 1984-1999FLST...

Replica chrome foot shifter kit includes bracket, cover, and chrome rod assembly.Order ratchet drum cover kit for 1970-early 1979 models only. ...

Includes bracket with bushings installed, pedal, spring cover, rod and all friction components.The clutch pull rod connects to the arm on the pivot shaft. This provides an offset to use with an...

Daniel Boone chrome brake control kit fits all hydraulic brake models with disc brakes, for rigid or swingarm frames. Includes correct linkage for 4 speed 1979-1984 rotary top models.Accepts Kelsey...

Chrome Daniel Boone forward control kit includes left side shifter and a right side brake only to accept Kelsey type rear master cylinder.Accepts Kelsey type master cylinder. Order brake line and...

Police style jockey shift kit clamps to all front down 1-1/8" tubes for 4-speed ratchet type. Kit includes a smooth gate without detents for shifting.This is an offset handle for use with 5 gallon...

Jockey shifter control kit is for rotary tops and include handle, cable and rocker clutch, spacer, and front and rear brackets to attach the jockey cable. Fits:FL 1979-1984Additional Information

Daniel Boone chrome brake control kit fits all hydraulic brake models with disc brakes, for rigid or swingarm frames. Includes correct linkage for 4 speed 1979-1984 rotary top models and chrome...

Lee style jockey pedal assembly features a chrome plate and pedal, black OE frame bracket and parkerized mount bolt kit.The bracket is for mounting to the frame. *NOTE: Must order clutch pull rod...

Kit is equipped for models powered by Shovelhead engines with hydraulic brake systems.Includes mount plate, brake pedal spring, brake line support, foot brake pedal, plunger, clevis pin, Kelsey Hayes...