1982

Brake spring stud features a chrome finish.Stud features a 5/16 x 18 thread. Fits:FL 1970-1984Additional Information UOM1 - EA

Chrome line runs from the master cylinder to the brake tee. Fits:XL 1981-1985Additional Information UOM1 - EA

Zinc steel front section of rear brake line fits between the master cylinder and junction.*NOTE: Brake line will have oxidation under the nuts due to the plating process. Fits:FLH 1979-1984Additional...

Zinc steel line runs from the master cylinder to the brake tee. Fits:XL 1981-1985Additional Information OEM No.42484-81

Matte chrome steel front section of rear brake line fits between the master cylinder and junction.NOTE: On 1936-1957 Big Twins, the brake arm faces rearward and in ...

Includes chrome pedal, cover, plunger and mount hardware. Fits:XL 1982-2003Additional Information UOM1 - KIT F

Brake pedal plate features a chrome finish.Requires a Kelsey Hayes type master cylinder. Fits:FL 1979-1984Additional Information OEM No.42480-79

Replace your stock worn brake pedal with our V-Twin brake pedal. This pedal has a chrome finish and includes the brass bushing. The pedal replaces the mid shift brake lever on stock applications...

Features a fine finish ground surface and is interchangeable with stock discs.Disc is .390" thick. For use on models with cast or wire wheel with bolt kit sold separately. Fits: FLT 1979-1984 FLH...

Kit includes two chrome calipers with brake pads and two stainless steel drilled discs. Fits:FXWG 1980-1983XL 1978-1983FX 1978-1983Additional Information

Kit includes 2 chrome calipers with brake pads and 2 zinc steel drilled discs. Fits:XL 1978-1983FX 1980-1983Additional Information UOM1 - KIT

Zinc spacers for rear master cylinder.Sold as a pair. Fits:FX 1979-1982Additional Information OEM No.5890

Chrome support bracket for rear master cylinder. Fits:FX 1979-1982Additional Information OEM No.42299-79 UOM

Zinc plated mid brake plunger kit include plunger clevis, kelsey brake plunger, brake pedal zinc clevis pin and 5/16 X 24 zinc hex nut.The clevis measures 1-3/8" x 5/8". Fits:FXE 1979-1982Additional...

Chrome brake pedal plunger clevis only. Fits:FX 1972-1982FXE 1972-1982Additional Information OEM No.42330-72

Zinc brake line support bracket.*NOTE: Brake line will have oxidation under the nuts due to the plating process. Fits:FLH 1970-1984Additional Information OE

Chrome brake pedal plunger. Fits:FL 1979-1985Additional Information OEM No.42333-79 UOM1 - EA

Chrome front and rear brake line tee bracket. Fits:FXST 1984-1986FX 1978-1984Additional Information OEM No.45152-78

Mid control brake kit features a zinc plated finish.*NOTE: Includes 3/4" bore rear master cylinder. Fits:FXE 1979-1982Additional Information UOM1 -

FXE mid control brake kit components are zinc plated as original.Accepts Kelsey Hayes type master cylinder V-twin #23-1772 or #23-1735. Fits:FXE 1979-1982Additional Information

FXE mid control brake kit components are chrome plated as original.Accepts Kelsey Hayes type master cylinder. Fits:FXE 1979-1982Additional Information UOM

Conversion kit updates 1973-1982 FX, FL models from a 10" disc to an 11-1/2" disc.This kit includes a 11.5" drilled zinc plated steel brake disc, mount bolts, and the dual aluminum anodized piston...

Conversion kit updates 1973-1982 FX, FL models from a 10" disc to an 11-1/2" disc.This kit includes a 11.5" drilled brake disc in stainless steel, mount bolts, and the dual aluminum anodized piston...

Chrome mid brake control kit is Kelsey Hayes type and is a replacement for mid style transmission mount as on 1972-1985 Superglide.Master cylinder is not included. Fits:FXE 1979-1982FX...

Kit includes o-ring style footpegs.Installation does not require the primary cover to be removed. Fits:FXR 1982-1984 Shovel or Evo poweredFXR 1985-1994Additional Information <

Chrome heavy duty kick starter kit features smooth thick wall kick cover and heavy duty kick starter arm. Kit is partially assembled.Requires the use of a wafer type release bearing kit. Fits:UL...

Kit is equipped for models powered by Shovelhead engines with hydraulic brake system.Includes brake pedal spring, brake line support foot brake pedal and plunger, Kelsey Hayes foot peg mount stud,...

Includes mount bracket with bushings installed, pedal, spring, cover and all friction components.The clutch pull rod connects to the arm on the pivot shaft. *NOTE: The rod must be ordered separately...

Chrome shifter control kit.Allows 1 down and 3 up shifting and the use of footpegs or footboards. Order complimenting forward brake control separately. ...

Replica chrome shifter control kit includes heavy duty shifter bracket, shifter lever, rod, rubber shift peg, footpeg, inner lever, instructions, and diagram.Kit is bolt on application. Fits:FXR...

Replica chrome shifter control kit includes heavy duty shifter bracket, shifter lever, rod, rubber shift peg, footpeg, inner lever, instructions and diagram.*Note: UPS may consider this part as...

Daniel Boone shifter kit for the left side on ratchet top 4 speed models. Fits:FL 1941-1984Additional Information UOM1 - KIT

Daniel Boone forward control kit with rubber includes right side hydraulic pedal assembly, left side shifter, rubber brake pedal peg and Cat's Paw rubber covered footpeg set.Accepts Kelsey type...

Chrome heavy duty kit features a smooth thick wall kick starter cover and heavy duty forged "thick" beefy kick starter arm. Kit is as shown, unassembled.Requires the use of a wafer type release...

Daniel Boone chrome shifter pedal without rod for left side mounting. Accepts stock kickstand assembly. For 4 or 5 speed application.NOTE: Rod not included, order separately. Fits:FXST 1984-1999FLST...

Replica chrome foot shifter kit includes bracket, cover, and chrome rod assembly.Order ratchet drum cover kit for 1970-early 1979 models only. ...

V-Twin - 22-0802 - Shifter Control KitDescription4 speed kit with down turn shifter includes frame mount shifter bracket, splined inner shifter lever, chrome shifter lever, shifter peg with long...

Includes bracket with bushings installed, pedal, spring cover, rod and all friction components.The clutch pull rod connects to the arm on the pivot shaft. This provides an offset to use with an...

Daniel Boone chrome brake control kit fits all hydraulic brake models with disc brakes, for rigid or swingarm frames. Includes correct linkage for 4 speed 1979-1984 rotary top models.Accepts Kelsey...

Chrome Daniel Boone forward control kit includes left side shifter and a right side brake only to accept Kelsey type rear master cylinder.Accepts Kelsey type master cylinder. Order brake line and...