Electra Glide Classic FLHC

Starter pinion gear screw. Fits:FL 1965-1984FX 1973-1984Additional Information UOM1 - EA Manufacturer

Zinc plated electric starter adapter plate for cast inner primary covers on 4-speed models.Accepts york electric starter kits. Mounts to inner primary with 5/16" screw in front hole and 1/4" in rear...

V-Twin - 32-2066 - Points Cover Insert with Hole RawDescriptionPoins cover insert with hole is constructed of steel with a raw finish. Features center holes for mounting coat rack hook. Fits:FL...

V-Twin - 32-2051 - OE Long Reach Factory Spark PlugDescriptionOE long reach factory plug plug features copper coated electrodes for foul resistance. Fits:FXST 1984-1998FX 1975-1981FLT 1984-1998FXS...

V-Twin - 32-2045 - 1965-1984 FL Electric Starter Kit Description Electric starter kit mounts to existing alloy cast inner to accept a high torque 12 volt starter. Motor includes the integral Bendix...

V-Twin - 32-1913 - Single Fire IgnitionDescriptionSingle fire ignition fires the front and rear cylinders independently of each other, which allows accurate timing of each cylinder.Stock ignition...

Magneto gear kit. Fits:FLST 1984-1992FX 1971-1983FL 1970-1983FXST 1984-1992Additional Information UOM1 - EA

Magneto rotor with shaft. Fits:FLST 1984-1992FX 1971-1983FL 1970-1983FXST 1984-1992Additional Information UOM1 - EA

Starter cable set is a 3 piece set.This three piece set includes one 6 gauge battery cable with 13/32" and 11/32" holes sizes and two 8 gauge black battery cablew with 17/16" and 11/32" hole sizes,...

Starter installation screw kit is for electric start conversion kits by V-Twin. Fits:FL 1965-1985Additional Information UOM1 - KIT

2.0 kW starter motor includes a 9 tooth starter gear and 6 screw mounting for electric starter kits.Mounts with 6 screws on face. MFG # WW1370. Fits:FL 1958-1985Additional Information

V-Fire single fire ignition kit includes a V-Fire single fire ignition kit with a chrome 12 volt coil.Mounts to stock bracket and accepts stock type coil covers. Works with most aftermarket single...

Starter solenoid kit includes a zinc solenoid, plunger assembly kit and an end cover boot. Fits:FL 1965-1984FXST 1987-1988Additional Information UOM

V-Fire dual fire ignition kit includes a V-Fire dual fire ignition kit with a black 12 volt coil.Includes a mechanical advance unit and all hardware. *NOTE: Dual fire is where there are two sparks at...

Big Twin coil mount with swtich bracket mounts bolts on to existing studs on FL and FX frames but does not accept cover. Mount features a raw finish.Bracket does not accept coil cover. *NOTE: Must...

York electric starter kit. Fits:FL 1958-1984Additional Information UOM1 - KIT ManufacturerV-Twin

Magneto drive gear set is for use with Burkhardt magneto drive assemblies. Fits:FL 1970-1992Additional Information UOM1 - SET

Turn signal wiring harness kit has PVC covered wires. Fits:FL 1970-1984Additional Information UOM1 - KIT Manuf

V-Fire ignition kit is single fire and includes mechanical advance unit, hardware, and wiring instructions.Black wire is for the front and the white wire is for the rear. Order coil separately...

V-Fire dual fire ignition kit includes a mechanical advance unit and all hardware.Ignition kit is dual fire where there are two sparks at the same time. Critical wiring instructions are included...

Battery cable is 6 gauge with 5/16" and 3/8" holes on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shield terminal ends. Used for solenoid to starter. Fits:FXE...

Battery cable is 6 gauge with 13/32" and 11/32" hole sizes on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shielded terminal ends. Use for ground post. Fits:FL...

Black battery cable is 8 gauge with 17/16" and 11/32" hole size on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shield terminal ends. Used for solenoid to battery...

Auxiliary seat spring frame cross stud with spacer. Fits:FL 1958-1984Additional Information OEM No.52605-65 UO

Auxiliary zinc seat spring kit with chrome springs, brackets, nut set, and buddy seat spring bar.Kit adapts to all plunger mounted buddy seats for extra weight capacity. Fits:FL 1965-1984Additional...

V-Twin - 31-9974 - 9 inch Chrome Rear Turn Signal MountDescriptionChrome 9" rear mount bar for FL and FLST models. Thread pitch is 1/4"-20.Rear turn signal mount measures 6-7/8" center to center...

Auxiliary seat spring yokesSold in a quantity of 2. Fits:FL 1965-1984Additional Information OEM No.52596-65

Auxiliary seat spring bracket catch set.Sold in a quantity of 2. Fits:FL 1965-1984Additional Information OEM No.52586-68

Auxiliary buddy seat spring bar. Fits:FL 1965-1984Additional Information OEM No.52566-65 UOM1 - EA

Auxiliary spring buddy seat bracket set. Fits:FL 1965-1984Additional Information OEM No.52583-68 UOM1

Zinc windshield extension bracket set.Sold as a set of two. Fits:FLH 1960-1984Additional Information OEM No.58107-60

Zinc windshield mounting bracket set includes right and leftSold in a quantity of 2. Fits:FLH 1949-1984Additional Information OEM No.58095-49<

V-Twin - 31-9929 - 10 inch Chrome Turn Signal Mount RearDescriptionChrome 10" rear mount bar.The distance across the holes center to center measures 5-7/8". Fits:FLHTC 2009-2013FL 1974-1984FLHR...

V-Twin - 31-9922 - Chrome 8-1/4 inch Turn Signal Mount Bar RearDescriptionChrome 8-1/4" rear mount bar is cast construction.The distance across the holes center to center measures 6-7/8". Fits:FLHTC...

Zinc plated carburetor upper and lower support bracket with hardware kit is for fitting a CV carburetor to a 1948-1985 Big Twin motor. Kit is used to mount motor case bolt between cylinders.This 2...

Black seat bracket kit includes seat bracket, right and left bracket. Fits:FXE 1966-1984FLH 1958-1984FXR 1982-1983FX 1966-1984FL 1958-1984FX 1980-1984Additional Information

Chrome top maxi engine mount has a two piece and two bolt construction for secure fastening. Fits:FX 1971-1984FL 1948-1984Additional Information UOM

Solo seat hardware kit includes nose bracket, chrome springs and rear brackets to mount small type solos.Includes a bracket and 2 thick spacers for the use on 1982-1985 FX models.The thick spacers...

Zinc front solo seat mount bracket bolts to frame holes above seat post tube. The seat nose bracket will swivel on this mount.This bracket will also mount to frames with a flat triangular plate at...

Stainless steel windshield molding clamp set to attach top to center of beaded shields. Sold in a pair.Sold in a quantity of 2. Fits:FL 1969-1984Additional Information