Sportster XLH 1000 Electric Start

Right side speedometer drive is for a speedometer with a 2:1 ratio and is for front wheel drive and works great when converting from an electronic speedometer.Speedometer drive unit has a .750 axle...

Black front wheel drive speedometer cable with 12mm top nut. This 44-1/2" long cable is 6" over stock. Fits:FXSTC 1987-1995FXST 1984-1995XL 1974-1983FXD 1991-1994FLHTC 1987-1988FXDWG 1993-1994FLHT...

Black front wheel drive speedometer cable with 12mm top nut. This 42-1/2" long cable is 4" over stock. Fits:FXSTC 1987-1995FXST 1984-1995XL 1974-1983FXD 1991-1994FLHTC 1987-1988FXDWG 1993-1994FLHT...

Black front wheel drive speedometer cable with 12mm top nut. This cable is 38-1/2" long. Fits:XL 1974-1983Additional Information OEM No.67051-74

Black clutch cable has a casing length of 51.06" with adjuster and is 4" over stock. Total length is 58-1/2". Fits:XL 1971-1985Additional Information OEM No.

Black clutch cable feature heavy duty construction designed for reliability and longer service. This cable has a casing length of 47-7/8" with an overall length of 54-1/2". Fits:XL...

V-Twin black idle cable has a 45  elbow fitting. This cable has a casing length of 37.44" with an overall length of 41". Fits:FXST 1984-1989XL 1981-1985FLH 1981-1984FXR 1982-1989FLST 1986-1989FX...

Dual handlebar throttle cable assembly with black cables, grips, and chrome end plugs.Cable has a casing length 36" and is 40" overall. For use with Keihin butterfly style carburetors. Fits:FXST...

Replica Keihin carburetor rebuild kit Fits:FXR 1982-1988FX 1979-1984FLST 1984-1988FXST 1984-1988FL 1979-1984XL 1979-1988Additional Information

Natural alloy petcock has a 90  left outlet, nut, nylon filter, screen, washer, rubber gasket and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are...

Natural alloy petcock has straight outlet with nut and includes nylon filter screen, washer and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are...

Keihin carburetor Viton rebuild kit Fits:FXR 1982-1988FX 1979-1984FLST 1984-1988FXST 1984-1988FL 1979-1984XL 1979-1988Additional Information

Keihin carburetor rebuild kitSold as an 18 piece kit. Fits:FXR 1982-1988FX 1979-1984FXST 1984-1988FL 1979-1984FLST 1986-1988XL 1979-1988Additional Information

Alloy petcock with 90  right outlet and reserve position includes nut.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are made for a seated position on the motorcycle...

Keihin carburetor diaphragm pump. Fits:FXR 1982-1988FX 1979-1984FXST 1984-1988FL 1979-1984FLST 1986-1988XL 1979-1988Additional Information

V-Twin - 35-3007 - Anderson Twist Grip Assembly ChromeDescriptionDual cable type Anderson twist grip assembly with a black rubber grip set. Includes a die cast housing and billet throttle tube with a...

V-Twin - 35-3004 - Anderson Twist Grip Assembly BlackDescriptionSingle cable type Anderson twist grip assembly with a black rubber grip set. Includes a die cast housing and billet throttle tube with...

V-Twin - 35-2031 - 47mm OKO Shorty Carburetor Kit BlackDescriptionPerformance 47mm shorty carburetor with a black finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated...

OKO 42mm flatside carburetor kit includes vertical flange adapter, rubber sleeve, air cleaner adapter, lower carburetor stud and strap bracket. *Shown installed on a 1966 flat side Shovelhead.42mm...

Black intake manifold clamp set is two piece type without seals. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information UOM1 -

Performance 47mm shorty carburetor with an alloy finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

Friction spring throttle tension screw fits 1974-2022 with single or dual throttle.Sold in a pack of 10. Fits:XL 1974-2022FXR 1982-1994FL 1974-1984FX 1974-1984FXD 1991-2017FLST 1986-2017FXST...

Keihin carburetor jet replacement. Fits:XL 1976-1987FXST 1986-1992FL 1976-1980FLST 1986-1992Additional Information UOM1 - EA

Keihin carburetor air neddle. Fits:XL 1976-1987FXST 1986-1992FL 1976-1980FLST 1986-1992Additional Information UOM1 - EA

CV carburetor adapter kit includes 2 bolt flange, seal ring and mounting bracket with choke bracket. Will mount to stock intake manifold.Accepts OEM and replacement CV carburetor. Place carburetor...

Replica butterfly type Keihin carburetor accepts all replacement OEM components. Complete carburetor assembly includes updated needle and jet with fuel passages.Keihin carburetor is single cable...

Cv carburetor mount bracket features a natural stainless steel finish and mounts to the top of carburetor with four screws.Mounts to the 2 vertical or stock XL and Big Twin manifolds. Bracket...

2024 New Production natural alloy cast 1-7/8" intake manifol d is the flat seal type for use on OKO and S&S carburetors as a stock replacement.Machined for use with S&S and OKO carburetor...

Keihin carburetor rebuild kit contains all components for a professional accelerator pump rebuild.Includes 59.5mm Keihin accelerator pump rod for valve. Fits:XL 1976-1987FXD 1976-1992FLST...

Solid stainless steel intake manifold clamp kit is flexible for a form fit around the seals. Includes Vtwin's original "Red" flat seals. Fits:XL 1978-1985FL 1978-1984Additional Information

Black dual cable assembly with nylon tube and adjuster installed. Fits:XL 1981-1996FXE 1981-1996Additional Information UOM1 - EA

OKO Keihin carburetor kit with single throttle operation is for Ironhead models. Original butterfly type with choke and accelerator pump as original, with OEM type manifold and clamps. Flat seals...

Polished OKO hex petcock includes 22mm hex nut for installation.Includes stainless steel screen. *NOTE: Spigot faces under the body for 5/16" fuel outlet. Fits:FL 1975-1985XL 1975-1985FX...

Handlebar throttle screw kit includes plastic knob, spring and retaining ring. Fits:XL 1974-2020FL 1974-1984FX 1974-1984FXST 1984-2015FXD 1991-1997FLST 1984-2015FX 1984-1994FLT 1986-2007Additional...

V-Twin - 35-0892 - 1/4 inch Turn Throttle KitDescription1/4" turn throttle kit includes a 60" cable, hillclimber grip set and a 1" handlebar throttle assembly. Fits:FL 1976-1996XL 1976-1996FX...

Heavy duty Keihin carburetor diaphragm pump.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FL 1985-1989FX 1976-1984FXR 1982-1989Additional Information

Black intake manifold clamp set includes flat style seals and fillister screws. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information

40mm XL carburetor kit. Fits:XL 1971-1985Additional Information UOM1 - KIT ManufacturerV-Twin

Kit includes 38mm OKO flatslide carburetor with built in choke activator, spigot intake manifold, throttle cable, two bolt flange adapter and twist grip set.Kit includes seal adapters for use with...

Chrome hex petcock is rear facing and is constructed of forged brass with screen. Includes a 22mm nut for attaching male fitting on fuel tank.Designs are made for a seated position on the motorcycle...