1983

Made of stamped steel, these D-shaped footboards feature a rubber inserts.Features a raised footboard pad with anti-vibration rubbers. This footboard set can also be used on 1940-1973 FL. Mounting...

Early square type footboard set has a raw finish without rubber insert.Set of 2. The bolt hole on each hinge is 1/2" apart.. Footboards are exact for 1914-39 models, but will fit 1941-85 FLH models. ...

Chrome driver half moon footboard set features rolled edges as original for the authentic look. Pads are fastened with glue.Set of two. This footboard set can also be used on 1966-1984 FL models...

Replica black footboard set with rolled edge and a reinforced center includes commemorative 1940 World's Fair rubber mats riveted on.Mounting bracket features 10" spacing. Fits:FL 1941-1984G...

Replica chrome footboard set with rolled edge and a reinforced center includes commemeorative 1940 World's Fair rubber mats riveted on.Mounting bracket features 10" spacing. Fits:FL 1941-1984G...

Studs are 1/2" x 20 outer diameter. Inner diameter is 3/8" x 24. Fits:FLH 1977-1984Additional Information UOM1 - SET

V-Twin - 27-0855 - Driver Chrome Footboard SetDescriptionChrome footboard set is streamliner style.Mounting bracket features 8" spacing. Fits:FLT 1980-UPFLST 1986-UPAdditional Information

Right side footpeg mount block features a raw finish and is for FXR models.Outer primary must accept mid-shift shifter access plate with bushing provision for the shifter shaft. Inner primary must...

Left side footpeg mount block features a raw finish and is for FXR models.Outer primary must accept mid-shift shifter access plate with bushing provision for the shifter shaft. Inner primary must...

V-Twin - 27-0822 - Driver Footboard Set with Wave DesignDescriptionChrome billet footboard set has black molded rubber inserts with a wave design.Mounting bracket features 8" spacing. Fits:FLT...

Kit will move the footboards forward 2" and will leave the stock controls intact. Kit is a 4 piece set, includes all necessary hardware, and has a smooth black finish. Fits:FLT 1983-2008Additional...

Extension kit will move the footboards forward 2" and will leave the stock controls intact. Kit is a 4 piece chrome set and includes all necessary hardware. Fits:FLT 1983-2008Additional Information

Replica footboard has a rolled edge and reinforced center, and features an investment cast stainless steel. This set accepts rivetted mats which are sold separately.Sold as a pair. Mounting bracket...

Chrome kickstand mount bracket with holes in the face of the bracket, as original. Fits:UL 1938-1947FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

World's Fair half moon footboard kit features black footboards with alloy World's fair inserts.Attach inserts with four screws. Mounting bracket features 10" spacing. Fits:FL 1941-1984W...

Deluxe half moon footboard kit features black footboards with alloy inserts.Mounting bracket features 10" spacing. Fits:FL 1941-1984W 1936-1952Additional Information

V-Twin - 27-0748 - Driver Black Footboard SetDescriptionBlack footboard set is streamliner style.Mounting bracket features 8" spacing. Fits:FLT 1980-UPFLST 1986-UPAdditional Information

Exact replica black footboards with factory style "X" ribs and construction. Features black half moon footboard rubber inserts with bullseye.Set of two. Footboard rubbers are glued in place, rivets...

Chrome mount bracket is used to mount right male style pegs and brake pedal.*NOTE: For FXR mid control applications. ...

Chrome extension bracket to mount right side male style pegs .*NOTE: Must order footpeg set separately. Fits:FXR 1982-1994Additional Information OEM No.

Chrome extension bracket to mount left side male style pegs.Mount holes measure 1-1/4" center to center. ...

Short front footboard stud is for the right side. Fits:FL 1970-1984Additional Information OEM No.50657-70A UOM

Chrome mustache highway bar kit with cats paw footpegs.These bars are not to be used with a front engine bar. Fits:FX 1971-1984FL 1958-1984Additional Information

Passenger footboard kit includes brackets and chrome boards with rubber inserts. Fits:FL 1973-1984Additional Information UOM1 - KIT

V-Twin - 27-0570 - Footboard Pad SetDescriptionPads for D-shaped footboards.Mounting bracket features 10" spacing. Fits:FLT 1980-UPFL 1974-1984FLST 1986-UPAdditional Information

V-Twin - 27-0560 - Shifter Peg Kit for Heel-Toe ShifterDescriptionFlame shifter peg kit for use with heel toe shifters. Features chrome flames with rubber accents.Sold as a pair. Fits:FL...

Chrome kickstand tab kit includes washer, acorn nut, and tab . Fits:FXST 1984-1999FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Chrome kickstand mount bracket. Fits:FLT 1981-2008Additional Information OEM No.50078-81A UOM1 - EA

Constructed of steel and chrome plated, this adjustable kickstand stop is installed on the kickstand shaft to prevent the leg from banging into the primary case. Fits:FLST 1986-1990UL 1938-1947FXST...

Chrome kickstand mounting kit includes kickstand mount, spring, leg stop, and spring plate. Kickstand measures 11-1/2" from bend to top. Fits:UL 1938-1947FX 1971-1984EL 1936-1940FL...

Chrome kickstand mount bracket is without holes in the face of the bracket, as original. Fits:UL 1938-1947FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Chrome kickstand spring plate. Fits:FLST 1986-1990UL 1938-1947FXST 1984-1990FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Stop your kickstand from hitting your primary cases by installing this steel leg stop on your kickstand shaft. Fits:FLST 1986-2006FXST 1984-2006FX 1971-1984EL 1936-1940FL 1941-1984Additional...

V-Twin - 27-0406 - Footpeg Male Stud SetDescriptionFootpeg male stud set fits all male footpeg sets on pre-2018 applications.Fits on kick starter pedal, V-Twin #17-0624 Fits:FX 1980-UP...

Chrome kickstand wedge kit is used for lowering FLT models. Fits:FLT 1981-1984FLHT 1985-2006FLHR 1981-1984FLHS 1985-2006FLHR 1985-2006FLHS 1981-1984FLHT 1981-1984FLT 1985-2006Additional Information

Stamped forged steel footboard mount tab set. Fits:EL 1936-1940FL 1941-1984UL 1936-1940Additional Information UOM1 - SET

Kickstand shaft washer set installs between the stand and the bracket. Features a zinc plated finish.Used to adjust the height when the stand is attached to the bracket. Fits:FL 1941-1985Additional...

Skeleton foot kickstand features constructed polished stainless steel. End is threaded for hex bolt.May require shim wedge under kickstand mount or washer on shaft. Order spring and lock tab...

Zinc plated primary footboard mounting kit includes hardware and extended rear footboard bracket for use with custom drag or muffler pipes.Kit is for use with OE type exhaust systems. *NOTE: Includes...

Zinc oval inspection cover for the left side with footpeg spline.. Fits:FL 1965-1984Additional Information UOM1 - SET