Super Glide Electric Start FXE

Transmission engine hex drain plug 1/2" X 13 thread, zinc. Fits:XL 1957-1976 Engine and TransmissionFL 1941-1984 TransmissionFX 1971-1984 TransmissionAdditional Information

When restoring your Big Twin, don't overlook your rocker boxes. Replace the old rocker caps with our V-Twin chrome rocker shaft end nuts. These end nuts have a allen style head and are for 1971-1984...

Four piece solid tappet adapter kit replaces hydraulic tappet inserts. Fits:FLT 1979-1983FX 1971-1984FXR 1982-1983FL 1953-1984Additional Information

Motor case drain/oil pump body plug has a zinc finish. Fits: UL 1937-1948 Case F 1911-1920 Case J 1921-1929 Case FL 1968-1984 Oil pump FX 1971-1984 Oil pump EL 1936-1940 Case VL 1930-1936...

Chrome hex stock type kit includes nuts and washers for the transmission side cover and clutch arm. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Stock headbolt kit with washers features a zinc finish. Fits:FX 1971-1984FL 1948-1984Additional Information UOM1 - KIT

Chrome domed triple tree fork stem nut features 7/8" x 24 inside threads. Fits:FX 1971-1984XL 1978-1987Additional Information UOM1 - EA

V-Twin - 7508-20T - Chrome Pushrod Cover and Clip KitDescriptionChrome pushrod cover and clip kit includes 4 clips and cups, seals, springs and cork washers. Fits:FXST 1984-UPFL 1940-1947FXD...

The chrome rocker arm shaft end plug makes installation and removal a much easier job than with the original slotted part. Includes 4 plugs per set. Fits:FL 1971-1984FLT 1979-1983FX 1971-1984FXR...

Frame and rork kit includes straight leg rigid frame, a 1" overstock inline black spring fork and an inline Spring Fork handlebar. The 1" compliments the 30  frame. Assembly accepts Shovelhead or...

Frame and fork kit includes replica retro rigid 30  rake frame and 32" inline spring fork unit that features chrome front legs, outer springs, rockers and chrome rear leg.*NOTE: There are no serial...

Frame and fork kit inlcudes a replica retro rigid 30  rake frame and 32" inline spring fork assembly that features a black finish.Frame will accept Panhead or Shovelhead engine with 4-speed...

Chrome upper rear shock stud kit includes four cup washers and two studs. Has stud for 1/2" shock eyelet.. Fits:FX 1973-1984Additional Information OEM No.

Zinc Nyloc shock stud nut is 5/8-18 UNC thread. Fits:XL 1957-1974KH 1954-1956FX 1971-1984FL 1958-1984Additional Information OEM No.

V-Twin - 54-0421 - Chrome Shock Stud Washers 1/2 inch HoleDescriptionChrome 1/2" hole x 1" flat shock stud washers Fits:FLT 1997-UPFXR 1982-1994FL 1965-1984FX 1971-1984XL 1975-UPFXD...

Chrome 1/2" hole cup shock stud washers Fits:FL 1965-1984FX 1971-1984XLH 1972-1974Additional Information OEM No.54545-65

Chrome 3/8" hole cup shock stud washers Fits:FX 1971-1984XLH 1972-1974FL 1965-1972Additional Information OEM No.54543-65

Upper rear shock zinc stud kit includes four cup washers and two studs. Has stud for 1/2" shock eyelet. Fits:FX 1973-1984FL 1973-1984Additional Information

Dry charged 12 volt battery and requires filling with electrolyte acid available from your local auto parts store.Not maintenance free. Battery is shipped dry without acid. Battery is lead/acid type...

V-Twin - 52-2034 - 17 inch x 4.5 inch Replica Rear Spoke WheelDescription17" x 4.50" Replica wheel assembly features chrome rim, 40 chrome spokes, chrome hub with internals.The hub is 6" in length...

Wheel features a 16" X 3.00" black rim, chrome hub with internals, and 40 chrome spokes, assembled.Includes snap ring. **NOTE: All spokes on wheel need to be inspected and re-torqued after 500 ...

Wheel features a Replica 16" x 3.00 drop center rim, a chrome hub with 3/4" bearings, and polished 40 stainless steel spokes.Single disc wheel is assembled and ready to directly bolt on to 41mm forks...

16" X 3.00" wheel assembly features chrome rim, 40 polished stainless steel spokes, chrome hub with internals.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Wheel and caliper kit includes a chrome wheel assembly, chrome caliper, chrome 51 tooth sprocket, rear drilled disc, bolts, chrome caliper bracket, support spring, and chrome stay bar with bolts...

V-Twin - 52-0301 - 19 inch X 2.50 inch Wheel Rim and Spoke Kit ChromeDescriptionRim and spoke set include 19" x 2.50" front rim with 40 chrome spokes with 40 spoke nipples.Rim is steel and drop...

V-Twin - 52-0300 - 16 inch x 3 inch Wheel Rim and Spoke Kit Chrome SteelDescriptionRim and spoke set include 16" x 3" front rim with 40 chrome spokes with 40 spoke nipples.For use with a steel hub...

Replica 16" X 3.00" wheel assembly features drop center chrome rim, 40 stainless steel spokes, chrome hub with internals, for front or rear applications.The hole for the valve stem that is located on...

Wheel features a 16" x 3" chrome drop center rim with a small center valve stem hole, a chrome hub with internals and 40 chrome twirled spokes.Wheel is lace and trued. ...

Wheel features 16" X 3.00" chrome rim, chrome hub with internals, and 40 chrome spokes, assembled.Includes snap ring. **NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles...

Rear frame swingarm features a chrome finish. Bearings and races are not included. Fits:FX 1970-1984Additional Information UOM1 - EA

V-Twin - 51-1322 - Lowered Rear Axle Plate Set RawDescriptionLowered rear axle plates are threaded 3/8"-18 for fender brace sissy bar mounting. Adjusters threaded 3/8"-24 use screws for adjusters, to...

Engine bar features 1-1/4" tubing.This engine bar is not for use with extended forward controls. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection...

Raw finish dropped swingarm features a raised up axle position, so this lowers the swingarm and chassis in relation to the axle. Axle slots are 3/4", for disc brake applications. Swingarm is for use...

Chrome finish dropped swingarm features a raised up axle position, so this lowers the swingarm and chassis in relation to the axle. Axle slots are 3/4", for disc brake applications.Lowers bike 1/2"...

This 5th Mount transmission frame repair tab is weld on style for stock frames. The tab is constructed of steel and has a raw finish.May require finishing prior to installing. Fits:FX 1971-1984FL...

Brake line tee tab. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - EA Manufacturer

Upper shock frame mounts are weld on style for stock frames.Sold as a set of two. Fits:FL 1965-1984FX 1971-1984Additional Information UOM1

Rigid frame front oil tank mount casting to be welded on.Thread is 5/16 x 24 and the lip from the bottom to the top measures 1-1/4". For use with 1-1/2" bar. Fits:FL 1941-1984FX 1972-1984EL...

Rear frame engine mount and front transmission mount. Fits:FX 1971-1984FL 1958-1984Additional Information UOM1 - EA

Replica rear hardtail frame section is duplicated from an original rigid frame. Weld-on type and does not have seat post bushing.The rear transmission mounts are 1-1/2" tall. This hardtail includes...