Sportster XLH 1000 Electric Start

Zinc handlebar switch kit screws are self-tapping, and are sold in a pack of 25. Fits:FLT 1979-1995FXR 1982-1994FXST 1984-1995FX 1982-1984FL 1982-1984FLST 1986-1995XL 1982-1995FXD 1991-1995Additional...

Chrome die cast spark plug cover fits perfectly on a spark h ex for Big Twin 14mm pre 1999 models. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999FX 1971-1984FLT 1979-1999XL 1957-1985FL...

Stainless steel handlebar switch housing screw Fits:FXR 1982-1994FXST 1984-1995FLST 1986-1995XL 1982-1995FXD 1991-1995Additional Information

Zinc battery vent clamp has a 1/4" inner diameter. Fits:FXR 1982-1994FXST 1984-1996XL 1967-1996FX 1971-1978FL 1965-1984FXE 1971-1984FXD 1991-1996Additional Information

V-Twin - 37-8881 - Riser Cup Washer ChromeDescriptionChrome riser cup washer Fits:FXST 1984-UPFXR 1982-1994FXD 1991-2017FX 1973-1984XL 1962-UPAdditional Information

Kit includes nut, tapered spacer, lock washer, and chrome cap plug. Fits:FXR 1982-1988FX 1971-1984XL 1954-1988Additional Information UOM

Swivel tapered headlamp washers Fits:XL 1959-1995FX 1971-1984Additional Information OEM No.67815-59A

Chrome socket lever pin set Fits:FLST 1986-2014FXD 1991-2014FLT 1982-2007FXST 1984-2014XL 1982-2003FXR 1984-1994Additional Information

Horn cover mount hardware includes 3 screws, 3 lock washers, 3 nuts, 1 speed nut and 1 spacer. Used to mount FX and FL horns. Fits:FXST 1984-1989FL 1965-1984FX 1971-1984XL 1965-1985FLST...

Drain plug is 1/8" National Pipe Thread, and can be used on a variety of applications.Plug can be used on lower fork sliders for FLH models and rocker arm covers, crank case, gear case, and oil pump...

Stainless steel exhaust header clamp bolt. Fits:XL 1957-1985FL 1948-1965Additional Information UOM1 - KIT

V-Twin - 37-8453 - Handlebar Riser BoltDescriptionHandlebar riser bolt is 3-3/4" long with a 1/2-13 thread. Fits:XL 1974-UPFX 1974-1982Additional Information

Chrome sprocket bolt set includes thread size 7/16"-20 X 1-1/4 Fits:FLST 1986-1998 spoke wheelFXST 1984-1998 spoke wheelXL 1979-1990 spoke wheelFL 1973-1984 spoke wheelFX 1973-1984 spoke...

V-Twin - 37-7966 - Handlebar Clamp Screw Cover CapDescriptionChrome handlebar clamp screw cap snap over allen head screws to cover hole. Fits:FXST 1984-UPFXR 1982-1994FX 1973-1984XL 1974-UPAdditional...

V-Twin - 37-6370 - Front Fender Stainless Steel RivetDescriptionReplacement stainless steel solid rivet is for use on the front fender bracket. Fits:FXR 1982-1994FXD 1991-2017FX 1973-1984XL...

M8 x 1-1/4mm x 40mm allen cap screw set for wide clamps.Sold as a pack of 10. Fits:XL 1957-1985FL 1948-1965Additional Information UOM10 -

Triple tree stem nut washer. Fits:FXR 1982-1986FX 1971-1984XL 1971-1986Additional Information UOM1 - EA

Chrome bolt kit includes allen bolts for rear caliper. Fits:FXR 1982-1986FXST 1984-1986FX 1982-1984FLST 1986-1986XL 1982-1986FX 1982-1986Additional Information

Front motor mount spacer measures 1-1/4" X 3/8".Sold as a pair. Fits:XL 1979-1985Additional Information UOM1 - SET

Clutch cable in braided stainless steel with clear coat fits Sportster models.Stainless steel braided with clear coat clutch cable has a PVC sleeve. The braid is tightly woven for a bright, quality...

Black V-Twin throttle and idle cable set with 45  Elbow fitting.Both cables have a 49-3/4" casing. Fits:FXR 1985-1989FXST 1984-1989XL 1981-1989FXR 1982-1984FLST 1986-1989FL 1981-1984FX...

V-Twin clear coated stainless steel throttle cable has a 36.375" casing length with an overall length of 40". Fits:FXST 1984-1989XL 1981-1985FLH 1981-1984FXR 1982-1989FLST 1986-1989FX...

V-twin stainless Steel idle cable has a 35.875" casing length and an overall length of 40". Fits:FXST 1984-1989XL 1981-1985FLH 1981-1984FXR 1982-1989FLST 1986-1989FX 1981-1984Additional Information

V-Twin - 36-0882 - Black Throttle Cable with 90  Elbow FittingDescriptionBlack throttle cable has a 90  elbow fitting. This cable has a casing length of 41" which is 8" over stock.Throttle with 90 ...

Black throttle and idle cable set with 45  elbow fitting. These cables have a casing length of 44.81" and is 8" over stock. Fits:FXST 1984-1989XL 1981-1989FLH 1981-1984FLST 1986-1989FX...

Black throttle and idle cable set with 45  elbow fitting. These cables have a casing length of 36.81".Both cables are screw in, both casing measures 37-3/8", and the travel is 41-3/8" and 41-1/4" for...

Stainless steel braided with a clear coat throttle and idle cable set has 45  elbow fitting. The casing length of the throttle and idle cable is 38". Fits:FXST 1984-1989XL 1981-1989FLST 1986-1989FL...

Left side speedometer drive is for a speedometer with a 2240:60 ratio.Speedometer drive unit has an .750 axle hole, and includes a .361 wide spacer with an overall length of .940. Fits:FXR...

Black front wheel drive speedometer cable with 16mm top nut with fine threads. This cable has a length of 40". Fits:FXR 1987-1993XLH1100 1986-1987XLH 1984-1987Additional Information

Black front wheel drive speedometer cable with 16mm top nut. This 42" long, cable is 2" over stock. Fits:FXR 1987-1993XLH1100 1986-1987XLH 1984-1987Additional Information <

Black clutch cable has a casing length of 51.06" with adjuster and is 4" over stock. Total length is 58-1/2". Fits:XL 1971-1985Additional Information OEM No.

Black clutch cable feature heavy duty construction designed for reliability and longer service. This cable has a casing length of 47-7/8" with an overall length of 54-1/2". Fits:XL...

V-Twin black idle cable has a 45  elbow fitting. This cable has a casing length of 37.44" with an overall length of 41". Fits:FXST 1984-1989XL 1981-1985FLH 1981-1984FXR 1982-1989FLST 1986-1989FX...

Dual handlebar throttle cable assembly with black cables, grips, and chrome end plugs.Cable has a casing length 36" and is 40" overall. For use with Keihin butterfly style carburetors. Fits:FXST...

Replica Keihin carburetor rebuild kit Fits:FXR 1982-1988FX 1979-1984FLST 1984-1988FXST 1984-1988FL 1979-1984XL 1979-1988Additional Information

Natural alloy petcock has a 90  left outlet, nut, nylon filter, screen, washer, rubber gasket and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are...

Natural alloy petcock has straight outlet with nut and includes nylon filter screen, washer and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are...

Keihin carburetor Viton rebuild kit Fits:FXR 1982-1988FX 1979-1984FLST 1984-1988FXST 1984-1988FL 1979-1984XL 1979-1988Additional Information

Keihin carburetor rebuild kitSold as an 18 piece kit. Fits:FXR 1982-1988FX 1979-1984FXST 1984-1988FL 1979-1984FLST 1986-1988XL 1979-1988Additional Information

Alloy petcock with 90  right outlet and reserve position includes nut.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are made for a seated position on the motorcycle...