Sportster XLH 883 Deluxe

Handlebar throttle screw kit includes plastic knob, spring and retaining ring. Fits:XL 1974-2020FL 1974-1984FX 1974-1984FXST 1984-2015FXD 1991-1997FLST 1984-2015FX 1984-1994FLT 1986-2007Additional...

V-Twin - 35-0892 - 1/4 inch Turn Throttle KitDescription1/4" turn throttle kit includes a 60" cable, hillclimber grip set and a 1" handlebar throttle assembly. Fits:FL 1976-1996XL 1976-1996FX...

Heavy duty Keihin carburetor diaphragm pump.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FL 1985-1989FX 1976-1984FXR 1982-1989Additional Information

V-Twin - 35-0696 - 38mm OKO Flatslide Carburetor KitDescriptionFull kit includes 38mm OKO flatslide carburetor with built in choke activator, throttle cable, twist grip set, manifold and spigot...

Chrome hex petcock is rear facing and is constructed of forged brass with screen. Includes a 22mm nut for attaching male fitting on fuel tank.Designs are made for a seated position on the motorcycle...

Chrome hex petcock is down facing and is constructed of forged brass with screen. Features 3/8" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on the...

V-Twin - 35-0684 - Handlebar Throttle Adjuster Knob ChromeDescriptionChrome handlebar throttle adjuster knob attaches to the stock throttle lock. Fits:FXD 1991-2017FLST 1986-2017FXST 1984-2017XL...

Chrome notch petcock with angle fitting and knob, features a 360  swivel high capacity elbow and includes a straight fitting, full reserve and lever control for on/off and reserve.Petcock features an...

Chrome hex petcock is down facing and is constructed of forged brass with screen. Features 3/16" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on the...

Chrome hex petcock has inward facing outlet and is constructed of forged brass with screen. Features 5/16" National Pipe Thread brass hose spigot with nut.Designs are made for a seated position on...

Sifton chrome petcock forward facing with 3/8" outlet with nut.Petcock features solid brass construction with on and off and reserve positions and screen. Designs are made for a seated position on...

V-Twin - 35-0428 - Intake Manifold Flange Kit Natural FinishDescriptionIntake manifold flange kit with natural finish comes with seal and screws. Fits:FLST 1986-2006FXST 1984-2006FLT 1986-2006XL...

Chrome petcock has straight outlet with nut and includes nylon filter screen, washer and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are made for...

Keihin carburetor main jet is 1.80mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor main jet is 1.75mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor main jet is 1.70mm. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor main jet is 1.65mm. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor slow jet is .88mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor slow jet is 1.00mm Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLT 1984-1989Additional Information

Keihin carburetor slow jet is .65mm. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor slow jet is .72mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLT 1979-1989Additional Information

Keihin carburetor slow jet is .75mm. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Keihin carburetor slow jet is .68mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional Information

Twist grip kit with 2 stock length black cables, is the push-pull type for Keihin butterfly and CV type carburetors and includes a twist throttle and grip set. Fits:XL 1981-1989FX 1981-1989Additional...

Chrome handlebar throttle clamp and tube set is for dual cable applications. Fits:FXR 1982-1994FXST 1984-1995FX 1982-1984FL 1982-1984FLST 1986-1995XL 1982-1995FLT 1982-1995FXD 1991-1994Additional...

Dual handlebar throttle handle with grips. Grips are without chrome end plugs. Fits:FLT 1979-1995FXR 1982-1994FXST 1984-1995FLST 1986-1995XL 1981-1995FXD 1991-1995FL 1981-1984FX 1981-1984Additional...

V-Twin - 35-0220 - Carburetor Idle ScrewDescriptionKeihin and CV carburetor idle screw allows for easier adjustment by hand. Fits:FL 1976-1984FXD 1991-2017FX 1971-1984XL 1976-UPFLST 1986-2017FXST...

Keihin carburetor rebuild contains needle, proper O-rings, and diaphragm. Fits: FL 1984-1984 FXST 1984-1989 XL 1984-1989 FXR 1984-1989 FX 1984-1984 FLST 1986-1989 FLT 1984-1984 Additional...

V-Twin - 35-0134 - High Flow Fuel Inlet BrassDescriptionBrass high flow carburetor fuel inlet replaces broken fuel inlet to the carburetor bowl for modified engines. For all Keihin carburetors...

Chrome petcock nut Fits:FX 1975-1984FL 1975-1984FXR 1982-1994FXD 1991-2017XL 1975-1995FLST 1986-2017FXST 1984-2017Additional Information

V-Twin - 35-0071 - 1 inch Twist Grip Assembly ChromeDescriptionSingle 1" cable type throttle handle assembly with Anderson type grips features chrome throttle housing.Cable not included. ...

Teardrop carburetor cover is natural cast and is made to fit linkert carburetors only.Cover features a 3 bolt hole mounting design. This is not an air cleaner. Fits:FL 1970-1984XL 1971-2006FX...

Teardrop carburetor cover is made to fit Bendix and Keihin carburetors only.Cover features a 3 bolt hole mounting design. This is not an air cleaner. *NOTE: The length of the mount screws are...

Chrome OKO teardrop air cleaner assembly includes the back plate, filter and slotted cover for "easy breathing". For Bendix and Keihin butterfly carburetors.The back plate features a natural alloy...

Black OKO teardrop air cleaner assembly includes the back plate, filter and slotted cover for "easy breathing". For Bendix and Keihin butterfly carburetors.The back plate features a natural alloy...

V-Twin - 34-1687 - Black Wyatt Gatling Air Cleaner AssemblyDescriptionWyatt Gatling assembly includes round air cleaner with black mesh cover, integral breather system with bracket, and mounting kit...

Shorty Oval Air Cleaner Kit includes chrome cover, backing plate, mount screws, and filter element. Cover is a two screw tupe with rubber insert.Order breather bracket kit separately for Big Twin or...

Alloy air cleaner backing plate features a 3 post design to mount teardrop air cleaners.Plate is the two screw type and 160mm diameter in the round section to fit cover. Accepts Bendix-Keihin models...

Black oval air cleaner cover.Holes are 4" apart center hole to center hole. Fits:FL 1971-1984FXST 1984-1989FX 1971-1984XL 1966-2003FLST 1986-1989FLT 1979-1989Additional Information

Early style Bendix carburetor breather air snoot features a black cover without the filter, for Bendix and Keihin butterfly carburetors.*NOTE: Mount screws not included, must be ordered separately...